1. Танилцуулга
Thank you for choosing the CREWORKS 15x15 Inch 5-in-1 Heat Press Machine. This versatile machine is designed for transferring designs onto various items such as T-shirts, bags, mouse pads, mugs, hats, plates, and shoes. This manual provides essential information for safe operation, setup, and maintenance to ensure optimal performance and longevity of your heat press.
2. Аюулгүй ажиллагааны чухал заавар
- Дулааны прессийг үргэлж тогтвортой, халуунд тэсвэртэй гадаргуу дээр ажиллуул.
- Keep hands and body clear of the heating platen during operation to prevent burns. The aluminum platen is coated with temperature-resistant nylon fiberglass composite, but it still gets very hot.
- The swing-away design allows the heating element to be moved safely aside, reducing the risk of accidental contact. Utilize this feature.
- Ажлын байрандаа агааржуулалт сайтай байх ёстой.
- Do not leave the machine unattended while powered on or in operation.
- Хүүхэд болон тэжээвэр амьтдыг машинаас хол байлга.
- Машиныг ашиглаагүй үед эсвэл цэвэрлэх, засвар үйлчилгээ хийхээс өмнө цахилгааны залгуураас салга.
- Машиныг өөрөө өөрчлөх эсвэл засах гэж бүү оролдоорой. Тусламж авахын тулд мэргэшсэн үйлчилгээний ажилтантай холбогдоно уу.
3. Багцын агуулга
Савлахдаа бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу:
- Main Heat Press Unit (15x15 inch flat platen)
- Аяганы хэвлэлийн хавсралт
- Тагны даралтын хавсралт
- Хавтан хэвлэлийн хавсралтууд (2 хэмжээтэй)
- Цахилгааны утас
- Зааварчилгааны гарын авлага
4. Бүтээгдэхүүн дууссанview
Familiarize yourself with the main components of your CREWORKS Heat Press Machine:
Figure 4.1: Main Components of the Heat Press Machine
- Pressure Handle: Used to lower and raise the heating platen and apply pressure.
- Height Regulator: Adjusts the distance between the heating platen and the lower platen for different material thicknesses.
- Time & Temperature Control Box: Digital display for setting and monitoring temperature and time.
- Эрчим хүч солих: Машиныг асаах/унтраах.
- Spring-Loaded Bolts: Provide even pressure distribution across the platen.
- Heat Pad: The lower silicone pad that supports the item being pressed.
- Слайд төмөр зам: Allow the lower platen to slide out for easier placement of items and safer operation.
Figure 4.2: Easy Adjustment Knob for Pressure and Height
The easy adjustment knob allows you to quickly raise or lower the heat pad up to 15 inches to accommodate larger or thicker objects.
Figure 4.3: Intelligent LCD Control Box
The control box features a digital display for precise temperature (up to 570°F / 300°C) and time (up to 999 seconds) settings.
5. Тохиргоо
- Баглаа задлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
- Байршил: Place the main heat press unit on a sturdy, level, and heat-resistant workbench or table. Ensure there is enough space around the machine for the swing-away function.
- Эрчим хүчний холболт: Цахилгааны утсыг машинд холбоно уу, дараа нь газардуулсан 110В цахилгаан залгуурт.
- Attachment Installation (if applicable): For mug, cap, or plate pressing, attach the corresponding heating element following the instructions provided with each attachment. Ensure secure connection.
6. Ашиглалтын заавар
This section covers general operation and specific instructions for different attachments.
6.1. Ерөнхий үйл ажиллагаа
- Асаах: Flip the main power switch to the 'ON' position. The control box will light up.
- Температурыг тохируулах: Press the 'SET' button on the control box. Use the up/down arrows to adjust the desired temperature. Press 'SET' again to confirm.
- Цаг тохируулах: Press the 'SET' button twice. Use the up/down arrows to adjust the desired time in seconds. Press 'SET' again to confirm.
- Урьдчилан халаах: Allow the machine to preheat until it reaches the set temperature. The 'OUT' indicator light will turn off when the target temperature is reached.
- Даралтыг тохируулах: Use the height regulator knob to adjust the pressure. Turn clockwise for more pressure, counter-clockwise for less. Test with a scrap material to ensure appropriate pressure.
6.2. T-Shirt/Flat Item Pressing
Figure 6.1: T-Shirt Pressing with the Main Unit
- Ensure the flat platen is installed.
- Preheat the machine to the recommended temperature for your transfer material (e.g., 320-360°F).
- Slide out the lower platen. Place the T-shirt or flat item onto the silicone pad, ensuring it is smooth and free of wrinkles.
- Place your transfer design onto the item. Cover with a Teflon sheet or parchment paper if required by your transfer material.
- Swing the heating platen over the item and lower the pressure handle to engage the press.
- The timer will automatically start. Once the time elapses (e.g., 30 seconds), lift the pressure handle and swing the heating platen away.
- Carefully remove the transfer paper (hot or cold peel, as per transfer instructions) and then the item.
Figure 6.2: Visual Guide for T-Shirt Pressing
6.3. Mug, Cap, and Plate Pressing
Figure 6.3: Mug, Cap, and Plate Attachments
To use the mug, cap, or plate attachments, first replace the flat platen with the appropriate attachment. Ensure it is securely fastened. Follow the general operating steps for setting temperature and time, then:
- Аяга дарах: Place the transfer paper around the mug. Insert the mug into the mug press attachment and close the clamp. Recommended temperature: 330-380°F for 30 seconds.
- Cap Press: Place the transfer paper onto the cap. Position the cap on the cap press attachment. Lower the heating element onto the cap. Recommended temperature: 330-350°F for 40 seconds.
- Plate Press: Place the transfer paper onto the plate. Position the plate on the plate press attachment. Lower the heating element onto the plate. Recommended temperature: 330-380°F for 30 seconds.
Note: Specific temperature and time settings may vary depending on the transfer paper, ink, and material used. Always refer to the recommendations of your transfer material supplier.
6.4. Бүтээгдэхүүний албан ёсны видео
Video 6.4.1: Official demonstration of the CREWORKS 5-in-1 Heat Press Machine's features and applications.
7. Засвар үйлчилгээ
- Цэвэрлэгээ: Ensure the machine is unplugged and completely cool before cleaning. Wipe down the heating platen and other surfaces with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
- Силикон дэвсгэрийн арчилгаа: Regularly inspect the silicone pad for wear or damage. Replace if necessary to ensure even pressure.
- Хадгалах: Машиныг ашиглаагүй үед хуурай, тоосгүй орчинд хадгална.
8. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Жигд бус дулаан дамжуулалт | Uneven pressure; damaged silicone pad; faulty heating element. | Adjust pressure knob; inspect and replace silicone pad; contact support if heating element is faulty. |
| Машин халаахгүй байна | Power issue; faulty heating element; control box malfunction. | Check power connection and outlet; contact support. |
| Шилжилт наалдаагүй | Incorrect temperature or time; insufficient pressure; incorrect transfer material. | Verify settings with transfer material instructions; adjust pressure; ensure correct transfer type for material. |
| Machine tilts when swinging away | Machine not secured; unstable surface. | Ensure machine is bolted down or placed on a heavy, stable surface to prevent tilting. |
Хэрэв танд энд дурдаагүй асуудал тулгарвал эсвэл санал болгож буй шийдлүүд асуудлыг шийдэж чадахгүй бол хэрэглэгчийн тусламжтай холбогдоно уу.
9. Техникийн үзүүлэлтүүд
- Ботьtage: 110 вольт
- Ватtage: 1400 ватт
- Бүтээгдэхүүний хэмжээ: 19.5 x 15 x 15 инч
- Барааны жин: 42 фунт
- Загварын дугаар: HPM-P-CREWORKS
- Брэнд: Багийн ажилчид
- Материал: Металл, хуванцар
- Өнгө: Хар
- Дээд температурын үнэлгээ: Фаренгейтийн 570 градус (Цельсийн 300 градус)
10. Баталгаат хугацаа ба дэмжлэг
For warranty information, please refer to the documentation included with your purchase or contact CREWORKS customer service. If you require technical assistance or have questions regarding your heat press machine, please reach out to our support team through the official CREWORKS website or your retailer's customer service portal.
