1. Танилцуулга
This manual provides essential information for the safe and efficient operation of your Y&H 60A PWM Solar Charge Controller. Please read these instructions carefully before installation and use to ensure optimal performance and longevity of the product.
2. Аюулгүй ажиллагааны заавар
- Ensure the battery has sufficient voltagЭхний суулгацын өмнө батерейны төрлийг танихад хянагч нь e.
- Алдагдлыг багасгахын тулд зайны кабель аль болох богино байх ёстой.
- The regulator is only suitable for lead-acid batteries (OPEN, AGM, GEL). It is not suitable for nickel metal hydride, lithium-ion, or other batteries.
- Цэнэг зохицуулагч нь зөвхөн нарны модулийг зохицуулахад тохиромжтой. Өөр цэнэглэх эх үүсвэрийг цэнэг зохицуулагчтай хэзээ ч бүү холбоорой.
3. Бүтээгдэхүүний онцлог
- Built-in industrial micro-controller.
- Large LCD display with adjustable parameters for float charge voltage, бага ботьtage discharge, low resistance, and load timer.
- Dual USB output (5V/2A) for charging mobile devices.
- Fully automatic PWM charge management.
- Multiple protection functions: power-off memory, over-heat, low voltage discharge, short circuit, open circuit, overload, and overcharge protection.
- MOSFET reverse current protection, low heat production.
4. Тохиргоо ба суурилуулалт
Follow these steps for proper connection of the solar charge controller:
- Connect the battery to the charge regulator (plus and minus).
- Connect the photovoltaic module to the regulator (plus and minus).
- Connect the consumer to the charge regulator (plus and minus).
Important: Reverse order applies when uninstalling!
An improper sequence can damage the controller!
Figure 4.1: Connection diagram for the Y&H 60A Solar Charge Controller.
Video 4.2: Demonstration of connecting a solar charge controller to a battery and solar panel. Note: This video features a similar product from a different brand, but the connection principles are applicable.
5. Ашиглалтын заавар
5.1. LCD Display and Key Functions
The large LCD screen displays all parameters. The controller features three buttons for navigation and settings:
- MENU товч: Short press to switch between different display interfaces. Long press for 3 seconds to enter the settings page.
- UP товчлуур: Утгыг нэмэгдүүлэхийн тулд дарна уу.
- Доошлох товч: Утгыг багасгахын тулд дарна уу.
The display shows various parameters including battery voltage, solar panel charging status, load status, accumulated charge/discharge ampere-hours, ambient temperature, and load mode.
Figure 5.1: LCD display interfaces and parameter adjustment flow.
5.2. Параметрийн тохиргоо
To adjust parameters:
- Long press the MENU button for 3 seconds to enter the settings page.
- Use the UP/DOWN buttons to adjust the desired value.
- Long press the MENU button again to save the setting and exit.
Parameters that can be adjusted include float charge voltage, бага ботьtage салгах, бага дууtage reconnect, and load timer settings.
Video 5.2: Demonstration of LCD display navigation and parameter adjustment on a Y&H 60A Solar Charge Controller. Note: The video title mentions MPPT, but this product is a PWM controller. The display and setting functions are generally similar.
5.3. Dual USB Output
The controller is equipped with dual 5V/2A USB ports, allowing for convenient charging of mobile phones, tablets, and other USB-powered devices.
Figure 5.3: Charging a smartphone using the controller's dual USB ports.
6. Засвар үйлчилгээ
To ensure the long-term performance and reliability of your solar charge controller, regular maintenance is recommended:
- Keep the controller clean and free from dust and debris.
- Periodically check all wire connections to ensure they are secure and free from corrosion.
- Ensure adequate ventilation around the controller to prevent overheating.
7. Алдаа засах
Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг доорх хүснэгтээс харна уу.
| Нөхцөл байдал | Болзошгүй шалтгаан | Шийдэл |
|---|---|---|
| Нартай үед цэнэглэх дүрс асахгүй байна | Solar panel opened / Wiring set again | Дахин холбогдох |
| Load icon on | Батерей бага байна | Цэнэглэх |
| Ачаалах дүрс удаан анивчдаг | Over load / Short circuit protection | Reduce load watts / Remove short circuit, 1 minute or automatic recovery |
| Цахилгаан унтраа | Battery too low / protection | Зай/холболтыг шалгана уу |
8. Техникийн үзүүлэлтүүд
| Онцлог | Үнэ цэнэ |
|---|---|
| Загвар | RBL-60A |
| Батерейны эзлэхүүнtage | 12V / 24V авто |
| Цэнэглэх гүйдэл | 60 А |
| Цэнэглэх гүйдэл | 30 А |
| Хамгийн их нарны оролт | 12V battery: 23V; 24V battery: 46V |
| Тэнцвэржүүлэх | 14.4 В |
| Float Charge | 13.7V (тохируулах боломжтой) |
| Шингэн алдалтыг зогсоох | 10.7V (тохируулах боломжтой) |
| Дахин залгах | 12.6V (тохируулах боломжтой) |
| USB гаралт | 5V/2A (MAX) |
| Өөрийгөө ашиглах | <10мА |
| Ашиглалтын температур | -35 хэмээс +60 хэм хүртэл |
| Хэмжээ/Жин | 19.3 x 19.3 x 9.8 см / 360 гр |
| Үйлдвэрлэгч | Y&H |
| ASIN | B07L6GD5JB |
| UPC | 721821482959 |
9. Баталгаат хугацаа ба дэмжлэг
For warranty information or technical support, please contact the manufacturer, Shenzhen Yonghui Fashion Co., Ltd, or refer to the product's purchase platform for specific details.
