1. Танилцуулга
This user manual provides detailed instructions for the installation, operation, and troubleshooting of the SIIG HDMI 2.0 Audio Extractor (Model: CE-H24F11-S1). This device is designed to split an incoming HDMI audio signal into stereo analog audio and Toslink optical outputs, enabling connection to various audio systems that may lack HDMI input.
The extractor supports high-resolution video up to 4K/60Hz with HDR and is compliant with HDCP 2.2. It also features ARC (Audio Return Channel) support via Toslink and CEC bypass, ensuring compatibility with modern home theater setups. Please read this manual thoroughly before use to ensure proper setup and optimal performance.
2. Бүтээгдэхүүний онцлог
- HDMI 2.0a and HDCP 2.2 compliant.
- Supports HDCP 2.2, HDR, and CEC bypass.
- Video resolutions up to 4Kx2K@60Hz YUV 4:4:4 8-bit and 4K HDR YUV 4:2:0 10-bit.
- Supports 480p, 720p, 1080i, 1080p resolutions.
- Video bandwidth: 18Gbps (600MHz per channel).
- Audio extraction via 3.5mm stereo jack and Toslink optical output.
- ARC audio extraction via Toslink (S/PDIF).
- Supports audio embedded via stereo and S/PDIF (Toslink).
- Дэмжигдсэн аудио форматууд:
- HDMI: PCM 2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
- Toslink (S/PDIF): PCM 2, Dolby 5.1, DTS 5.1
- 3.5mm Stereo: PCM 2
- Sturdy metal enclosure for durability and EMI/RFI noise interference minimization.
- ESD protection: ±15kV Air & ±8kV Contact.
- Country of origin: Taiwan.
- Regulatory approvals: FCC, CE, RoHS.
3. Багцын агуулга
Please verify that all items are present and in good condition. If any items are missing or damaged, contact your vendor for assistance.
- 1x HDMI 2.0 Audio Extractor/Embedder (CE-H24F11-S1)
- 1x USB Type-A to Micro B Cable (for power)
- 1x Installation Guide (this document)
4. Бүтээгдэхүүн дууссанview and Port Descriptions
Урд самбар:
- 3.5mm Stereo Output: Connect to analog audio devices (e.g., headphones, stereo speakers).
- S/PDIF (Toslink) Output: Connect to digital optical audio receivers or soundbars.
- HDMI гаралт: Connect to an HDMI display (e.g., TV, monitor, projector).
- Output Signal LED Indicator: Illuminates when an HDMI output signal is detected.
- Дахин тохируулах товч: Төхөөрөмжийг дахин тохируулахад ашигладаг.
- Slide Switch (FW/NORMAL Mode):
- Left (FW): Firmware update mode.
- Right (NORMAL): Normal operating mode. Ensure this is set to NORMAL for regular use.
Арын хэсэг:
- Micro-USB Port (DC 5V): Connect the provided USB power cable for device power. Also used for firmware updates.
- Цахилгаан LED үзүүлэлт: Төхөөрөмж асаалттай үед гэрэлтдэг.
- Input Signal LED Indicator: Illuminates when an HDMI input signal is detected.
- HDMI оролт: Connect to an HDMI source device (e.g., Blu-ray player, game console, streaming device).
- 4-pin DIP Switch: Used to configure EDID settings and enable/disable ARC and audio extraction functions.
5. Тохируулах заавар
Follow these steps to set up your SIIG HDMI 2.0 Audio Extractor:
- Унтраах төхөөрөмжүүд: Ensure all source devices, displays, and audio systems are powered off before making any connections.
- HDMI оролтыг холбоно уу: Connect an HDMI cable from your source device (e.g., Blu-ray player, game console) to the HDMI оролт port on the audio extractor.
- HDMI гаралтыг холбох: -аас HDMI кабелийг холбоно уу HDMI OUT port on the audio extractor to your display device (e.g., TV, monitor, projector).
- Connect Audio Output (Digital): For digital audio, connect a Toslink (optical) cable from the S/PDIF (Toslink) Output port on the extractor to your audio receiver, soundbar, or ampнастан.
- Connect Audio Output (Analog): Аналог стерео аудионы хувьд 3.5 мм-ийн аудио кабелийг холбоно уу 3.5 мм стерео гаралт port on the extractor to your headphones or stereo speakers.
- Эрчим хүчийг холбох: Connect the provided USB Type-A to Micro B cable to the Micro-USB порт (DC 5V) on the extractor and the other end to a USB power source (e.g., USB wall adapter, TV USB port). The Power LED Indicator will illuminate.
- Verify Slide Switch: Ensure the slide switch on the front panel is set to the Хэвийн position (right).
- Асаах төхөөрөмжүүд: Power on your display, audio system, and source device in that order.
6. Ашиглалтын заавар
6.1 EDID and Function Configuration (DIP Switch)
The 4-pin DIP switch on the back panel allows you to configure the EDID (Extended Display Identification Data) settings and control the ARC and audio extraction functions. Adjust these settings based on your connected devices and desired audio output.
| DIP шилжүүлэгчийн байрлал | Тодорхойлолт |
|---|---|
| PIN1: OFF, PIN2: OFF | EDID тойрч гарах |
| PIN1: OFF, PIN2: ON | Ultra HD (4K2K@60Hz) – 8/10/12bit, 3D, HDR video & 5.1ch audio |
| PIN1: ON, PIN2: OFF | Ultra HD (4K2K@60Hz) – 8/10/12bit, 3D, HDR video & 2ch audio |
| PIN1: ON, PIN2: ON | Learning EDID from Output |
| PIN3: OFF | Disable ARC Function |
| PIN3: ON | Enable ARC Function |
| PIN4: OFF | Disable Audio Extractor Function |
| PIN4: ON | Enable Audio Extractor Function (via Toslink & 3.5mm) |
Жич: After changing DIP switch settings, it is recommended to power cycle the audio extractor and all connected devices to ensure the new settings are applied correctly.
6.2 ARC (Audio Return Channel) Function
When ARC is enabled (PIN3 ON) and your display supports ARC, audio from your TV's internal tuner or smart apps can be sent back to the audio extractor via the HDMI cable and then output through the Toslink (S/PDIF) port to your audio system.
6.3 CEC Bypass
The device supports CEC (Consumer Electronics Control) bypass, allowing CEC commands to pass through the extractor to control connected HDMI devices. This means you can use a single remote to control multiple CEC-enabled devices in your setup.
7. Алдаа засах
If you encounter issues with the SIIG HDMI 2.0 Audio Extractor, please refer to the following common troubleshooting steps:
- Видео гаралт байхгүй:
- Бүх HDMI кабель найдвартай холбогдсон эсэхийг шалгаарай.
- Verify the input source is selected correctly on your display.
- Check the power connection to the extractor; the Power LED should be illuminated.
- Өөр HDMI кабель ашиглаж үзнэ үү.
- Adjust DIP switch settings for EDID (PIN1 & PIN2) to match your display's capabilities or try "EDID bypass".
- Power cycle all connected devices (source, extractor, display).
- No Audio Output (Toslink/3.5mm):
- Ensure audio cables (Toslink or 3.5mm) are securely connected to the correct output ports on the extractor and input ports on your audio system.
- Verify the audio input is selected correctly on your audio receiver/soundbar.
- Check DIP switch PIN4 is set to ON to enable audio extraction.
- If using ARC, ensure DIP switch PIN3 is set to ON and your TV's ARC function is enabled.
- Confirm the audio format from your source is supported by your audio system and the extractor (refer to "Product Features" for supported formats). Some audio systems may not support certain multi-channel formats.
- Try setting DIP switch PIN1: ON, PIN2: OFF for 2ch audio output if your audio system only supports stereo.
- Power cycle all connected devices.
- Intermittent Video/Audio:
- Сул кабелийн холболт байгаа эсэхийг шалгана уу.
- Цахилгаан хангамж тогтвортой байгаа эсэхийг шалгаарай.
- Reduce cable lengths if possible, especially for HDMI.
- Verify that the slide switch is in the Хэвийн байр суурь.
- Test with different HDMI cables.
- HDR/4K Issues:
- Ensure all connected HDMI cables are rated for HDMI 2.0 or higher and support 18Gbps bandwidth.
- Verify your source and display devices both support 4K/60Hz and HDR.
- Adjust EDID settings (PIN1 & PIN2) to ensure the correct video mode is selected.
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | CE-H24F11-S1 |
| HDMI нийцтэй байдал | HDMI 2.0a |
| HDCP-ийн нийцэл | HDCP 2.2 |
| Видео зурвасын өргөн | 18Gbps (600MHz per channel) |
| Дэмжигдсэн тогтоолууд | Up to 4Kx2K@60Hz (YUV 4:4:4 8-bit), 4K HDR (YUV 4:2:0 10-bit), 1080p, 1080i, 720p, 480p |
| HDR дэмжлэг | Yes (4K@60Hz YUV 4:2:0 10-bit) |
| Аудио гаралт | 1x Toslink (S/PDIF), 1x 3.5mm Stereo |
| ARC дэмжлэг | Yes (via Toslink) |
| CEC-ийн дэмжлэг | Тойрох |
| ESD хамгаалалт | ±15kV Air & ±8kV Contact |
| Материал | Металл хашаа |
| Бүтээгдэхүүний хэмжээ (L x W) | 4.56" x 0.78" (11.58 см x 1.98 см) |
| Зүйлийн жин | 6.4 унц (181.4 грамм) |
| Эрчим хүчний хангамж | DC 5V (via Micro-USB) |
| Ашиглалтын температур | 104 ° F хүртэл (40 ° C) |
| Гэрчилгээ | FCC, CE, RoHS, TAA compliant |
| Гарал үүслийн улс | Тайвань |
9. Засвар үйлчилгээ
The SIIG HDMI 2.0 Audio Extractor is designed for reliable operation with minimal maintenance.
- Цэвэрлэгээ: Use a soft, dry cloth to clean the device. Avoid using liquid or aerosol cleaners, as they may damage the unit.
- Агааржуулалт: Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийг агааржуулалт сайтай газар байрлуулсан эсэхийг шалгаарай. Агааржуулалтын нүхийг хааж болохгүй.
- Хадгалах: Удаан хугацаагаар ашиглаагүй тохиолдолд төхөөрөмжийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
- Програм хангамжийн шинэчлэлтүүд: Periodically check the SIIG website for any available firmware updates for your model. Follow the instructions provided with the firmware update carefully.
10. Аюулгүй байдлын мэдээлэл
Please observe the following safety guidelines to prevent damage to the device and ensure user safety:
- Төхөөрөмжийг ус эсвэл хэт их чийгэнд бүү тавь.
- Төхөөрөмжийг нээх эсвэл өөрчлөхийг бүү оролдоорой. Дотор нь хэрэглэгчийн засвар үйлчилгээ хийх хэсэг байхгүй.
- Use only the provided power cable or a certified 5V USB power adapter.
- Төхөөрөмжийг дулааны эх үүсвэр, нарны шууд тусгал, шатамхай материалаас хол байлга.
- Ensure proper grounding for all connected electrical equipment.
11. Баталгаат болон техникийн дэмжлэг
11.1 Баталгаат хугацааны мэдээлэл
The SIIG HDMI 2.0 Audio Extractor (CE-H24F11-S1) comes with a 3 жилийн баталгаат хугацаа. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official SIIG webсайт.
11.2 Техникийн дэмжлэг
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact SIIG customer support.
- Webсайт: Visit the official SIIG webТусламжийн эх сурвалж, түгээмэл асуултууд болон холбоо барих мэдээллийн сайт.
- Холбоо барих: Refer to your product packaging or the SIIG webтехникийн дэмжлэг авах хамгийн сүүлийн үеийн холбоо барих мэдээллийг авах сайт.
