1. Аюулгүй байдлын чухал мэдээлэл
Before assembling or operating your Toorx SRX-50S Indoor Cycle, please read and understand all instructions in this manual. Keep this manual for future reference.
- Ямар ч дасгалын хөтөлбөр эхлэхээс өмнө эмчтэй үргэлж зөвлөлдөөрэй.
- Ensure all bolts, nuts, and connections are securely tightened before each use.
- Place the indoor cycle on a flat, stable surface. Use a mat underneath to protect flooring and enhance stability.
- Ашиглалтын явцад хүүхэд, тэжээвэр амьтдыг төхөөрөмжөөс хол байлга.
- Тохиромжтой дасгалын хувцас, гутал өмс. Хөдөлгөөнт хэсэгт баригдах сул хувцаснаас зайлсхий.
- Энэ төхөөрөмжийн хэрэглэгчийн хамгийн их жин нь 125 кг байна.
- Хэрэв та ухаан алдах, толгой эргэх, өвдөх мэдрэмж төрвөл дасгалаа шууд зогсоо.
2. Тохиргоо ба угсралт
The Toorx SRX-50S Indoor Cycle requires some assembly. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed instructions.
2.1 Савлах
Carefully remove all components from the packaging. Check against the parts list to ensure all items are present and undamaged. Do not discard packaging until assembly is complete.
2.2 Хүрээний угсралт
Attach the front and rear stabilizers to the main frame using the provided bolts and tools. Ensure they are firmly secured to provide a stable base for the cycle.

Image: Close-up of the stabilizer foot, showing the adjustable knob for leveling the bike on uneven surfaces.
2.3 Дөрөө суурилуулах
Identify the left (L) and right (R) pedals. The left pedal typically tightens counter-clockwise, and the right pedal clockwise. Apply a small amount of grease to the threads before installation to prevent seizing. Ensure pedals are fully tightened.

Image: A wider view of the Toorx SRX-50S flywheel and chain cover, with the pedals clearly visible and attached to the crank arms.
2.4 Эмээлийн тохируулга
The saddle can be adjusted both vertically and horizontally to find your optimal riding position. Loosen the adjustment knobs, slide the saddle to the desired position, and securely tighten the knobs.

Image: Close-up of the ergonomic, two-tone black and grey saddle, designed for comfort during workouts.
2.5 Handlebar Installation and Adjustment
Attach the handlebar post to the main frame and then secure the handlebars. Adjust the handlebar height to a comfortable level, ensuring your back remains straight during your workout. Tighten all adjustment knobs firmly.
2.6 Console Installation
Mount the console onto the designated bracket on the handlebars. Connect any necessary sensor cables from the bike to the console. Ensure the console is securely attached and cables are not pinched.

Image: Close-up of the digital console, showing the display screen and control buttons. The screen currently reads '0:00'.
3. Ашиглалтын заавар
Familiarize yourself with the functions of your Toorx SRX-50S Indoor Cycle before beginning your workout.
3.1 Дасгал эхлүүлэх
Sit on the saddle and place your feet securely in the pedal straps. Begin pedaling at a comfortable pace. The console will automatically activate and begin displaying your workout data.
3.2 Эсэргүүцлийн тохируулга
The SRX-50S features a manual micrometric resistance adjustment system. Turn the resistance knob clockwise to increase resistance and counter-clockwise to decrease it. Adjust the resistance to match your desired workout intensity.

Image: Close-up of the brake system, highlighting the felt pads that apply resistance to the flywheel.
3.3 Консолын функцууд
The digital console displays various workout metrics:
- Хурд: Одоогийн дугуйн хурд.
- Цаг: Таны дасгалын үргэлжлэх хугацаа.
- Зай: Дасгал хийх явцад туулсан нийт зай.
- Судасны цохилт: Your heart rate, measured by the integrated pulse sensors.
- Калори: Тооцоолсон калори шатаасан.
- Тахометр: Counts steps or revolutions.
Use the button on the console to cycle through different display modes or reset values as needed.
3.4 Pulse Sensors
Grip the pulse sensors located on the handlebars with both hands to measure your heart rate. Ensure a firm, consistent grip for accurate readings. Your pulse will be displayed on the console.

Image: Close-up of the metallic pulse sensor pad, seamlessly integrated into the foam-covered handlebar for heart rate monitoring.
3.5 Яаралтай зогсолт
In case of an emergency or if you need to stop the flywheel quickly, press down firmly on the resistance knob. This will engage the emergency brake, bringing the flywheel to a rapid stop.
3.6 Усны савны тавиур
A convenient water bottle holder is integrated into the frame, allowing you to stay hydrated during your workout.

Image: Close-up of the black plastic water bottle holder, securely attached to the main frame of the Toorx SRX-50S Indoor Cycle.
4. Засвар үйлчилгээ
Regular maintenance ensures the longevity and safe operation of your Toorx SRX-50S Indoor Cycle.
- Цэвэрлэгээ: Тоног төхөөрөмжийг зар сурталчилгаагаар арчихamp Хөлс болон тоосыг арилгахын тулд хэрэглэх бүрийн дараа даавуугаар арчина. Зүлгүүрийн цэвэрлэгчээс зайлсхий.
- Тосолгоо: Periodically check the chain and moving parts for smooth operation. Apply a light lubricant if necessary, following manufacturer recommendations for bicycle chains.
- Тоормосны систем: Inspect the felt brake pads for wear. Replace them if they become excessively worn to maintain effective braking.
- Бүтцийн шалгалт: Regularly inspect the thick steel structure for any signs of damage or loose connections. Tighten any loose bolts or nuts.
- Дөрөө: Check pedals for tightness and smooth rotation.
- Console Batteries: If the console display becomes dim or unresponsive, replace the batteries (power source is battery-driven).
5. Алдаа засах
This section addresses common issues you might encounter with your indoor cycle.
- Console Not Displaying:
- Check if the console batteries are correctly installed and have sufficient charge. Replace if necessary.
- Ensure all sensor cables are securely connected to the console. - Эсэргүүцэл байхгүй эсвэл тууштай бус эсэргүүцэл:
- Verify that the resistance knob is functioning correctly and turning freely.
- Inspect the felt brake pads for wear or misalignment. - Ашиглалтын явцад гарах ер бусын дуу чимээ:
- Check all bolts and nuts for tightness, especially around the flywheel and crank arms.
- Inspect the chain for proper tension and lubrication. - Saddle or Handlebars Wobble:
- Ensure all adjustment knobs for the saddle and handlebars are fully tightened.
Хэрэв та энд жагсаагдаагүй асуудлуудтай тулгарвал эсвэл шийдлүүд асуудлыг шийдэж чадахгүй бол хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
6. Бүтээгдэхүүний техникийн үзүүлэлтүүд
| Загварын нэр | SRX-50S |
| Flywheel жин | 20 кг |
| Дамжуулах систем | Fixed Chain |
| Тоормосны систем | Эсгий дэвсгэр |
| Эсэргүүцлийг тохируулах | Manual Micrometric |
| Консол дэлгэц | Speed, Time, Distance, Pulse, Calories, Pedometer |
| Импульсийн мэдрэгч | Integrated on handlebars |
| Эмээлийн тохируулга | Босоо ба хэвтээ |
| Хүрээний материал | Thick Alloy Steel |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 107 x 51 x 115 см |
| Цэвэр жин | 41 кг |
| Хэрэглэгчийн хамгийн их жин | 125 кг |
| Цахилгаан эх үүсвэр (Консол) | Батерейгаар ажилладаг |

Зураг: Ойролцоогоор view of the Toorx SRX-50S flywheel and the protective chain cover, showcasing the robust design.

Зураг: цогц view of the Toorx SRX-50S Indoor Cycle, highlighting its overall structure and design.
7. Баталгаат хугацаа ба дэмжлэг
For information regarding the warranty period and terms for your Toorx SRX-50S Indoor Cycle, please refer to the warranty card included with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact Toorx customer support or your authorized dealer. Contact details can typically be found on the manufacturer's webсайт эсвэл таны худалдан авалтын баримт бичиг.





