KuWFi LTE Router CPE812 Instruction Manual

1. Бүтээгдэхүүн дууссанview

The KuWFi LTE Router CPE812 is a 4G wireless WiFi internet router designed to provide network connectivity using a SIM card. It features a transmission speed of up to 300Mbps and supports up to 32 WiFi users. This device is suitable for home and office environments, offering a 2.4GHz WiFi hotspot with broad coverage.

Гол онцлогууд:

• 4G LTE FDD: B1/B3/B7/B8/B20
• 4G LTE TDD: B38/B39/B40/B41
• 3G WCDMA: B1/B8
• Wireless transmission speed up to 300Mbps
• 2.4GHz WiFi hotspot with up to 3,000 square meter coverage
• Supports up to 32 WiFi users
• Internal dual-antenna design
• LED indicator display for status monitoring
• Security Protocol: WPA2-PSK
• Two RJ45 ports (one WAN, one LAN)

Зураг 1.1: Урд view of the KuWFi LTE Router CPE812, showcasing its four non-detachable antennas and LED indicators.

2. Тохируулах гарын авлага

Follow these steps to set up your KuWFi LTE Router CPE812.

2.1. SIM картыг оруулж байна

1. Locate the SIM card slot on the side of the router.
2. Insert a standard SIM card into the designated slot. Ensure the SIM card is correctly oriented.
3. The router supports standard SIM cards. Micro and Nano SIM cards require an adapter (not included).

Зураг 2.1: Хажуу тал view of the router highlighting the SIM card slot, LAN/WAN ports, and power input.

Image 2.2: Illustration indicating that only standard SIM cards are directly compatible; Micro and Nano SIMs require adapters.

2.2. Powering On the Router

1. Эрчим хүчний адаптерийг чиглүүлэгч дээрх DC IN порт руу холбоно уу.
2. Цахилгаан адаптерийг ханын залгуурт холбоно уу.
3. Press the ON/OFF button to power on the device. The LED indicators on the front will light up.

Image 2.3: The router packaged with its power adapter, Ethernet cable, and user manual.

2.3. Анхны Wi-Fi холболт

1. Once powered on, the router will broadcast a Wi-Fi signal.
2. Компьютер эсвэл мобайл төхөөрөмж дээрээ боломжтой Wi-Fi сүлжээг хайж олоорой.
3. Connect to the network with the SSID (Wi-Fi name) printed on the label at the bottom of the router (e.g., WIFI-XXXXX).
4. Enter the default Wi-Fi password (e.g., 12345678) also found on the router's label.

Image 2.4: The bottom label of the router displaying important information such as the default SSID and password.

2.4. хандах нь Web Interface and APN Setup

1. Нээлттэй a web browser on a device connected to the router's Wi-Fi.
2. Өгөгдмөл IP хаягаа оруулна уу 192.168.10.1 хаягийн мөрөнд оруулаад Enter дарна уу.
3. -д нэвтэрнэ үү web interface. The default username and password are typically "admin" (refer to the router's label if different).
4. Navigate to the "3G/4G setup" section.
5. Чухал: Uncheck the "auto select 3G / 4G ISP" option.
6. Choose "User Defined" for the APN settings.
7. Enter the correct APN (Access Point Name) provided by your SIM card provider. If you are unsure, you can insert your SIM card into a mobile phone and check its APN settings, or contact your SIM card provider.
8. Click "APPLY" to save the settings.

Зураг 2.5: Жишээ ньample of how to find APN settings on a mobile phone.

Зураг 2.6: Web interface screenshot demonstrating where to enter APN details.

3. Үйл ажиллагаа

3.1. Understanding Work Modes

The router supports various work modes to suit different network environments. These can typically be configured in the web interface under the "Mode" section.

• 3G/4G Wireless Router Mode: Connects to the internet via SIM card and broadcasts Wi-Fi.
• Standard Wireless Router Mode: Connects to a local network via Ethernet and broadcasts Wi-Fi.
• Standard Wireless AP and APClient Bridge Mode: Works as an access point or client bridge.
• Wireless AP Client Mode: Connects to another wireless AP or router via Ethernet.

3.2. Modifying Wi-Fi Settings

Wi-Fi сүлжээний нэр (SSID) эсвэл нууц үгээ өөрчлөхийн тулд:

1. хандах web интерфэйс (192.168.10.1).
2. Go to the "Wireless" section, then "Basic" to modify the SSID. Enter your desired network name and click "Apply".
3. Go to the "Wireless" section, then "Security" to modify the Wi-Fi password (WPA-PSK Key). Enter your new password and click "Apply".

3.3. Video Guide: Setup and Configuration

4. Засвар үйлчилгээ

To ensure optimal performance and longevity of your KuWFi LTE Router CPE812:

• Төхөөрөмжийг сэрүүн, хуурай газар, нарны шууд тусгал болон чийгнээс хол байлга.
• Чиглүүлэгчийг хүчтэй цахилгаан соронзон орны ойролцоо байрлуулахаас зайлсхий.
• Чиглүүлэгчийн гадна талыг зөөлөн, хуурай даавуугаар цэвэрлээрэй. Шингэн цэвэрлэгч бүү хэрэглэ.
• Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд зохих агааржуулалтыг хангана.
• Periodically check for firmware updates on the manufacturer's website to enhance performance and security.

5. Алдаа засах

Хэрэв та чиглүүлэгчтэйгээ холбоотой асуудалтай тулгарвал дараах нийтлэг шийдлүүдийг үзнэ үү.

5.1. No Network Data Connection Despite Wi-Fi Connection

If your device connects to the router's Wi-Fi but has no internet access:

• APN тохиргоог шалгана уу: Confirm that the APN settings in the router's web interface are correct. You can verify the correct APN by inserting your SIM card into a mobile phone and checking its network settings, then manually entering it into the router.
• Contact Provider: If the frequency bands are correct but automatic connection fails, manually set the APN. Consult your SIM card provider for the correct APN information.

Image 5.1: Detailed steps for checking and setting APN on a mobile device.

5.2. Poor 4G Signal

If you experience weak or unstable 4G signal:

• Сүлжээний горим: Ensure that you have selected "4G only" in the router's settings if your area has strong 4G coverage.
• Чиглүүлэгчийн байршил: Position the router in an open area, away from obstructions like thick walls or large metal objects, and near a window if possible, to improve signal reception.
• Lock Network Type: -д web interface, you can manage the settings page to lock the router to a 4G or 3G network, which can improve network stability if the signal is fluctuating.

5.3. Router Not Recognizing SIM Card

If the router does not detect the SIM card:

• Зөв оруулах: Ensure the SIM card is inserted correctly and fully into the slot.
• SIM карт төрөл: Verify you are using a standard SIM card or the correct adapter for Micro/Nano SIMs.
• IMEI Activation: Note that if your SIM card requires IMEI activation, this router may not function.

6. Техникийн үзүүлэлтүүд

7. Баталгаат хугацаа ба дэмжлэг

KuWFi provides comprehensive support for its products.

• Баталгаат хугацаа: Энэхүү бүтээгдэхүүн нь 3 жилийн баталгаат хугацаатай ирдэг.
• Техникийн дэмжлэг: VIP Technical Support is available for assistance with setup, configuration, and troubleshooting.
• Холбоо барих: If you encounter any problems, especially regarding SIM card connectivity or APN settings, please contact the seller or KuWFi customer support for assistance.