Танилцуулга
Thank you for choosing the Polk Audio PSW10 10-Inch Powered Subwoofer. This manual provides comprehensive instructions to help you set up, operate, and maintain your subwoofer for optimal performance. Please read these instructions carefully before use and retain them for future reference.
Хайрцагт юу байна
- Polk Audio PSW10 10-Inch Powered Subwoofer
- Цахилгаан кабель
- Хэрэглэгчийн гарын авлага
- Policy Documentation
Гол онцлогууд
- 10-Inch Dynamic Balance Woofer: Equipped with a 10-inch polymer-composite dynamic-balance cone driver for deep, precise bass.
- Built-in High-Current Ampамь нас: Delivers 50 watts continuous power and 100 watts dynamic power for impactful low-frequency reproduction.
- Non-Resonant Enclosure: All-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing minimizes resonance for clean sound.
- Олон талт холболт: Features line- and speaker-level inputs and speaker-level outputs for easy integration with various audio systems.
- Klippel Measurement Technology: Utilizes laser-based Klippel measurement technology for improved linearity and reduced distortion.
Зураг 1: Урд view of the Polk Audio PSW10 subwoofer, showcasing the 10-inch dynamic balance woofer and front-firing port for enhanced bass impact.
Тохиргоо
1. Байрлуулах
Optimal subwoofer placement is crucial for sound quality. Experiment with different locations in your room to find the best balance of bass response. Generally, placing the subwoofer in a corner can enhance bass output, while placing it closer to your main speakers can improve integration. Avoid placing it directly against a wall if it causes excessive booming.
2. Холболтууд
The PSW10 offers flexible connection options:
- Line-Level Input (RCA): Connect your receiver's subwoofer output (LFE or Sub Out) to the LFE input on the subwoofer using an RCA cable. If your receiver has left and right pre-out jacks, use both left and right line-level inputs on the subwoofer.
- Чанга яригчийн түвшний оролт/гаралт: For receivers without a dedicated subwoofer output, connect the speaker-level outputs from your receiver to the speaker-level inputs on the subwoofer. Then, connect the speaker-level outputs from the subwoofer to your main left and right speakers.
Figure 2: Rear panel connections and controls of the Polk Audio PSW10 subwoofer.
Ашиглалтын заавар
Once connected, adjust the following controls on the rear panel (refer to Figure 2):
- Дууны хяналт: Сабвуферын нийт гаралтын түвшинг тохируулна. Бага тохиргооноос эхэлж, басс нь үндсэн чанга яригчтай төгс зохицох хүртэл аажмаар нэмэгдүүлнэ.
- Бага нэвтрүүлэх шүүлтүүр: This control sets the upper frequency limit for the subwoofer. Adjust it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
- Фазын унтраалга (0°/180°): Adjust this switch to achieve the best bass impact and blend with your main speakers. Listen to music or a movie scene with strong bass and switch between 0° and 180° to determine which setting provides the most coherent and impactful bass.
- 3-Way Power Switch (Auto/On/Off):
- Автомат: The subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity.
- Асаалттай: Сабвуфер тасралтгүй асаалттай хэвээр байна.
- Унтраах: Сабвуфер унтарсан байна.
Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Polk Audio PSW10 subwoofer, follow these maintenance guidelines:
- Цэвэрлэгээ: Use a soft, dry cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Байршил: Сабвуферыг нарны шууд тусгал, дулааны эх үүсвэр болон хэт их чийгнээс хол байлга. Тохиромжтой агааржуулалтыг хангана уу amplifier panel to prevent overheating.
- Эрчим хүч: Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.
Алдааг олж засварлах
| Асуудал | Боломжит шийдэл |
|---|---|
| Сабвуферээс дуу гарахгүй байна | Check power connection and ensure the 3-way power switch is set to 'On' or 'Auto'. Verify audio cable connections from the receiver to the subwoofer. Increase the volume control on the subwoofer. |
| Сул эсвэл гажсан басс | Adjust the volume control and low-pass filter. Experiment with the phase toggle switch (0°/180°). Check for proper placement and ensure no obstructions are blocking the woofer or port. |
| Сабвуфер дуугарч байна | Ensure all connections are secure. Try plugging the subwoofer into a different electrical outlet. If using line-level inputs, try a ground loop isolator. |
| Сабвуфер автоматаар асахгүй байна | Ensure the 3-way power switch is set to 'Auto'. Increase the volume output from your receiver's subwoofer channel to ensure a strong enough signal for auto-on detection. |
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын нэр | PSW10 |
| Чанга яригчийн төрөл | Сабвуфер |
| Сабвуферийн диаметр | 10 инч |
| Amplifier Continuous Power | 50 ватт |
| Amplifier Dynamic Power | 100 ватт |
| Low-Pass Crossover Frequency | 80-160 Гц |
| Оролтын хэмжээtage | 120 вольт (AC) |
| Бүтээгдэхүүний хэмжээ (WxHxD) | 14" x 14.38" x 16.12" |
| Зүйлийн жин | 26 фунт |
| Холболтын технологи | Wired (Auxiliary) |
| Өнгө | Хар |
Figure 3: Dimensions of the Polk Audio PSW10 Subwoofer.
Баталгаат болон дэмжлэг
Your Polk Audio PSW10 Powered Subwoofer comes with a Хязгаарлагдмал баталгаат хугацаа. For specific details regarding warranty coverage, terms, and conditions, please refer to the included Policy Documentation or visit the official Polk Audio website. For technical support or service inquiries, please contact Polk Audio customer service.