1. Бүтээгдэхүүн дууссанview
The Waveshare 2.13inch E-Ink Display HAT V4 is a low-power, two-color (black and white) e-paper screen module designed for various embedded applications. It features a 250x122 resolution and communicates via an SPI interface. This HAT (Hardware Attached on Top) is compatible with Raspberry Pi series boards (including Zero/Zero W/Zero WH/2B/3B/3B+/4B) and Jetson Nano. Its key advantages include ultra-low power consumption, wide viewing angles, and the ability to retain displayed content without continuous power, making it suitable for applications like electronic shelf labels and industrial instrumentation.
Image 1.1: The 2.13inch E-Ink Display HAT V4 module with included accessories.
2. Багцын агуулга
- 2.13inch e-Paper HAT x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin cable x1
3. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Үйл ажиллагааны ботьtage | 3.3V / 5V |
| Интерфэйс | SPI |
| Тойм хэмжээ | 65mm × 30.2mm |
| Дэлгэцийн хэмжээ | 23.71mm × 48.55mm |
| Цэг тавцан | 0.194 × 0.194 |
| Шийдвэр | 250 × 122 пиксел |
| Дэлгэцийн өнгө | Хар, Цагаан |
| Саарал түвшин | 2 |
| Partial Refresh Time | 0.3-иод он |
| Full Refresh Time | 2s |
| Refresh Power | 26.4mW (typical) |
| Хүлээлгийн горим | <0.017мВт |
| Viewing өнцөг | >170° |
Image 3.1: Detailed specifications of the 2.13inch E-Ink Display HAT V4.
4. Setup & Hardware Connection
4.1 Connecting to Raspberry Pi
The 2.13inch E-Ink Display HAT V4 is designed to directly connect to the 40-pin GPIO header of Raspberry Pi boards. Ensure proper alignment of the pins before pressing the HAT onto the Raspberry Pi. The module includes an onboard voltage translator, making it compatible with both 3.3V and 5V MCUs.
Image 4.1: The 2.13inch E-Ink Display HAT V4 connected to a Raspberry Pi Zero.
Image 4.2: Hardware connection tables for various platforms including Raspberry Pi, Arduino, Jetson Nano, and STM32.
4.2 SPI Interface Pinout
The module communicates via the Serial Peripheral Interface (SPI). Below is the pinout for the SPI interface:
| Pin | Чиг үүрэг |
|---|---|
| VCC | 3.3V / 5V Power Supply |
| GND | Газар |
| DIN | SPI MOSI (Master Out Slave In) |
| CLK | SPI SCK (Serial Clock) |
| CS | SPI Chip Select (Low active) |
| DC | Data/Command Control Pin (High for data, Low for command) |
| RST | External Reset Pin (Low for reset) |
| ЗАВГҮЙ | Busy State Output Pin (Low for busy) |
Image 4.3: Pinout and interface details for the 2.13inch E-Ink Display HAT V4.
5. Operating Principles: Advantages of E-Ink Displays
E-Ink displays, also known as e-paper, utilize microcapsule electrophoresis technology. This technology involves charged nanoparticles suspended in a liquid that migrate under the action of an electric field, forming a display that closely resembles traditional printed paper. The primary advantages of e-ink screens include:
- Хэт бага эрчим хүчний хэрэглээ: Power is primarily consumed only during display refreshes, not for maintaining a static image.
- Арын гэрэл байхгүй: E-Ink displays are reflective, relying on ambient light, which makes them easy on the eyes and visible in bright conditions.
- Persistent Display: Content remains visible for extended periods even when power is removed.
- Өргөн Viewөнцөг Санал болгож байна a viewing angle greater than 170 degrees, similar to paper.
Image 5.1: Visual comparison highlighting the paper-like effect of E-Ink displays.
6. Software & Development Resources
Waveshare provides comprehensive online development resources and user manuals to assist with quick setup and programming. These resources typically include:
- Driver board schematics
- User manuals with detailed instructions
- Demo code and examples for Raspberry Pi, Arduino, and STM32
- Libraries and API documentation
For access to these resources, please refer to the official Waveshare product page or contact their support.
6.1 Introduction Video
Видео 6.1: Танилцуулах видео шоуasing the features and basic operation of the 2.13inch E-Paper HAT+ for Raspberry Pi, highlighting its low power consumption and compatibility.
Video 6.2: A video demonstrating the 2.13inch E-Ink display HAT, its partial refresh capabilities, and its use with Raspberry Pi and Jetson Nano.
Видео 6.3: Ерөнхий сайдview video of the 2.13 inch e-Paper HAT, illustrating its features such as low power consumption and the ability to display static content without power.
7. Өргөдөл Examples
The unique characteristics of E-Ink displays make them ideal for a variety of applications where low power, readability, and persistent display are crucial:
- Electronic Shelf Labels in retail environments
- Industrial Instrumentation displays
- Үнэ Tags and Asset/Equipment Tags
- Conference Name Tags and information displays
- Low-power data logging displays
Зураг 7.1: Дууслааview of the 2.13inch E-Ink Display HAT's features and potential applications.
Зураг 7.2: Нарийвчилсан view of the onboard level conversion chip and physical dimensions of the module.
8. Алдаа засах
If you encounter issues with your 2.13inch E-Ink Display HAT V4, consider the following:
- Холболт шалгах: Ensure all pins are correctly aligned and securely connected to the Raspberry Pi or other controller board. Verify the PH2.0 cable is properly seated.
- Эрчим хүчний хангамж: Confirm that your Raspberry Pi or controller board is receiving adequate power.
- Програм хангамжийн тохиргоо: Double-check your code and ensure all necessary libraries and drivers are installed and configured correctly as per the Waveshare online resources.
- SPI интерфэйс: Verify that the SPI interface is enabled on your host device (e.g., Raspberry Pi).
- Partial vs. Full Refresh: If the display shows ghosting or artifacts, perform a full refresh. E-Ink displays that support partial refresh may require occasional full refreshes to clear residual images.
- Ботьtage нийцтэй байдал: Онгоцны ботьtage translator supports 3.3V/5V. Ensure your MCU's voltage нь энэ хүрээнд байна.
For persistent issues, consult the Waveshare online development resources or contact their technical support.
9. Баталгаат хугацаа ба дэмжлэг
This Waveshare product is covered by the standard manufacturer's warranty. For detailed warranty information, technical support, or to access additional resources, please visit the official Waveshare website or contact their customer service department. Online development resources and user manuals are available to assist with product integration and troubleshooting.
