Silex DS-600-US Gigabit USB 3.0 Device Server Instruction Manual

1. Танилцуулга

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the Silex DS-600-US Gigabit USB 3.0 Device Server. The DS-600-US allows USB devices to be shared over a network, enabling multiple users to access USB devices remotely.

2. Аюулгүй байдлын мэдээлэл

• Always use the power adapter supplied with the device. Using an incorrect adapter may cause damage or fire.
• Төхөөрөмжийг ус, чийг, хэт өндөр температурт бүү тавь.
• Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд зохих агааржуулалтыг хангана.
• Төхөөрөмжийг өөрөө нээх, засах гэж бүү оролдоорой. Бүх үйлчилгээг мэргэшсэн боловсон хүчинд шилжүүлээрэй.
• Төхөөрөмжийг хүчтэй цахилгаан соронзон орноос хол байлга.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• Silex DS-600-US Gigabit USB 3.0 Device Server
• АС тэжээлийн хувиргагч
• Ethernet кабель
• Хурдан эхлүүлэх гарын авлага (энэ гарын авлага)
• Програм хангамжийн CD (эсвэл татаж авах заавар)

4. Тохиргоо

4.1 Физик холболт

1. Сүлжээний кабелийг холбох: Connect one end of the Ethernet cable to the LAN port on the DS-600-US and the other end to your network router or switch.
2. USB төхөөрөмжүүдийг холбох: Plug your USB devices (e.g., printer, scanner, external hard drive) into the USB 3.0 ports on the DS-600-US.
3. Эрчим хүчийг холбох: Plug the AC power adapter into the DC IN port on the DS-600-US, then plug the adapter into a power outlet. The power LED on the device server will illuminate.

Зураг 1: Урд ба хойд view of the Silex DS-600-US Device Server, showing the USB 3.0 ports, Ethernet port, and power input.

4.2 Програм хангамж суурилуулах

To access USB devices connected to the DS-600-US, you must install the Silex SX Virtual Link software on your computer.

1. Insert Software CD: If provided, insert the software CD into your computer's CD/DVD drive. Alternatively, download the latest software from the official Silex Technology webсайт (www.silextechnology.com).
2. Суулгагчийг ажиллуулах: Суулгагчийг олж, ажиллуулна уу file (e.g., 'setup.exe').
3. Дэлгэц дээрх зааврыг дагана уу: Follow the instructions provided by the installation wizard. You may need to restart your computer after installation.

5. Operating the Device Server

5.1 Connecting to USB Devices

1. Launch SX Virtual Link: Open the SX Virtual Link software on your computer.
2. Select Device Server: The software will display a list of available Silex device servers on your network. Select your DS-600-US.
3. USB төхөөрөмжийг холбох: The software will show the USB devices connected to the DS-600-US. Select the desired USB device and click the 'Connect' button. The device will now appear as if it is directly connected to your computer.

5.2 Disconnecting USB Devices

To disconnect a USB device from your computer and make it available to other users or for safe removal:

• In the SX Virtual Link software, select the connected USB device.
• Click the 'Disconnect' button.

Жич: Always disconnect USB storage devices safely through your operating system before disconnecting them via SX Virtual Link to prevent data loss.

6. Засвар үйлчилгээ

6.1 Програм хангамжийн шинэчлэлтүүд

Periodically check the Silex Technology website for firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update package carefully.

6.2 Цэвэрлэгээ

Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as they may damage the device.

7. Алдаа засах

7.1 Device Server Not Detected

• Ensure the DS-600-US is powered on and the power LED is illuminated.
• Verify the Ethernet cable is securely connected to both the device server and your network router/switch.
• Check your network settings to ensure your computer is on the same network segment as the device server.
• Temporarily disable any firewall software on your computer to see if it is blocking communication.

7.2 USB Device Not Connecting

• Ensure the USB device is properly plugged into the DS-600-US.
• Verify that the USB device is powered on, if it requires external power.
• Try connecting a different USB device to confirm the port on the DS-600-US is functional.
• Restart the SX Virtual Link software and try again.
• Restart the DS-600-US by unplugging and re-plugging the power adapter.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

The Silex DS-600-US Device Server comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Silex Technology webсайт.

For technical support, driver downloads, firmware updates, and frequently asked questions, please visit the Silex Technology support page:

www.silextechnology.com/support

When contacting support, please have your product model (DS-600-US) and serial number ready.