Strymon Volante соронзон цуурай машины зааварчилгааны гарын авлага

1. Танилцуулга

The Strymon Volante is a magnetic echo machine designed to deliver a wide range of vintage delay effects. It features three distinct echo engines: Drum echo, Tape echo, and Reel-to-Reel studio echo, along with a Sound on Sound looper mode and an onboard spring reverb. This pedal is suitable for electric and acoustic guitars, synthesizers, vocals, and keyboards, offering extensive control over delay parameters and sonic characteristics.

2. Аюулгүй байдлын мэдээлэл

• Эрчим хүчний хангамж: Use only the specified 9V DC power supply with the correct polarity. Using an incorrect power supply can damage the unit and void the warranty.
• Ус ба чийг: Do not expose the unit to water or excessive moisture. This can cause electric shock or fire.
• Агааржуулалт: Төхөөрөмжийн эргэн тойронд зохих агааржуулалтыг хангах. Агааржуулалтын нүхийг хааж болохгүй.
• Цэвэрлэгээ: Төхөөрөмжийг зөөлөн, хуурай даавуугаар цэвэрлээрэй. Шингэн цэвэрлэгч эсвэл аэрозоль хэрэглэж болохгүй.
• Үйлчилгээ: Төхөөрөмжийг өөрөө засварлах гэж бүү оролдоорой. Бүх үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад шилжүүлээрэй.

3. Багцын агуулга

Upon opening the box, verify that the following items are included:

• Strymon Volante Magnetic Echo Machine pedal
• 9V DC Power Supply (specific to region)
• USB кабель
• Хурдан эхлүүлэх гарын авлага (энэ гарын авлагад нарийвчилсан зааварчилгаа өгдөг)

4. Бүтээгдэхүүн дууссанview болон Хяналтууд

The Volante pedal features a comprehensive set of controls for shaping your echo sounds. Familiarize yourself with the layout below.

Зураг 4.1: Топ view of the Strymon Volante pedal, showing all knobs, switches, and footswitches.

Дээд самбарын удирдлага:

• REC LEVEL: Adjusts the input gain for the echo signal. Higher settings introduce more saturation.
• ДОТОО ХАСАХ: Filters out low frequencies from the echo repeats.
• MECHANICS: Controls the mechanical integrity of the virtual echo machine, affecting wow, flutter, and other imperfections.
• ЭЛЭГЛЭХ: Simulates the degradation of the magnetic medium, adding warmth and character to the repeats.
• TYPE Шилжүүлэгч: Selects between Drum, Tape, and Studio echo engines.
• ХУРДНЫ Сэлгүүр: Adjusts the playback speed of the echo, affecting delay time (Half, Normal, Double).
• ДАВТАЛТ: Controls the number of echo repeats.
• ЦУУРГИЙН ТҮВШИН: Adjusts the overall volume of the echo repeats.
• СЭЛБЭГ: Controls the level of the onboard spring reverb.
• TIME Playback/Feedback LEDs (1-4): Indicate active playback and feedback heads.
• SPACING Switch: Adjusts the spacing between the virtual playback heads (Even, Triplet, Golden, Silver).

Хөлийн унтраалга:

• ON (Left Footswitch): Toggles the effect on/off. Hold for Reverse.
• FAVORITE (Middle Footswitch): Recalls a saved preset. Hold for Pause (in Sound on Sound mode).
• TAP (Right Footswitch): Taps in the delay tempo. Hold for Splice (in Sound on Sound mode).

Зураг 4.2: Rear panel connections of the Strymon Volante, including audio inputs/outputs, expression pedal, USB, MIDI, and power input.

Арын самбарын холболтууд:

• INST/LINE Switch: Selects input level for instrument or line level signals.
• LEFT IN / RIGHT IN: Mono or stereo audio inputs.
• LEFT OUT / RIGHT OUT: Stereo audio outputs.
• EXP: Expression pedal input for real-time control of parameters.
• USB: USB connection for firmware updates and MIDI control.
• MIDI IN / MIDI OUT: Standard MIDI connections for advanced control and synchronization.
• 9VDC: Дагалдах 9V DC тэжээлийн хангамжийн оролтын тэжээл.

5. Тохиргоо

5.1 Эрчим хүчний холболт

1. Ensure the Volante is switched off (if applicable) and all audio connections are made before connecting power.
2. Дагалдах 9V DC тэжээлийн хангамжийг холбоно уу 9VDC арын самбар дээрх оролт.
3. Plug the power supply into a suitable wall outlet.

5.2 Аудио холболт

The Volante supports both mono and stereo operation.

• Моно тохиргоо: Төхөөрөмжөө холбоно уу LEFT IN jack. Connect the ОРХИГДУУЛСАН Жак руугаа ampөргөгч эсвэл дараагийн дөрөө.
• Стерео тохиргоо: Connect your stereo source (e.g., another stereo pedal, synth) to the LEFT IN болон RIGHT IN залгуурууд. Холбоно уу ОРХИГДУУЛСАН болон ШУУД ГАРАХ jacks to your stereo amplifier setup or audio interface.
• Оролтын түвшин: -г ашиглана уу INST/LINE switch to match your input signal level. Set to INST for guitar/bass, and ШУГАМ for synthesizers or effects loops.

5.3 MIDI and USB Connections (Optional)

• MIDI: Connect MIDI cables from your MIDI controller or interface to the MIDI IN болон MIDI OUT jacks for advanced control, preset changes, and synchronization.
• USB: Connect a USB cable from the Volante to your computer for firmware updates and MIDI over USB functionality.

6. Ашиглалтын заавар

6.1 Үндсэн үйл ажиллагаа

1. Engage the Effect: дээр дарна уу ON footswitch to activate the delay effect. The LED above the footswitch will illuminate.
2. Select Echo Type: -г ашиглана уу ТӨРӨЛ switch to choose between Drum, Tape, or Studio echo.
3. Adjust Delay Time: The delay time is primarily controlled by the TAP footswitch. Tap it two or more times to set the tempo. The ХУРД switch (Half, Normal, Double) further divides or multiplies the tapped tempo.
4. Control Repeats: эргүүлэх ДАВТАЖ БАЙНА knob to increase or decrease the number of echo repetitions.
5. Set Echo Level: -г ашиглана уу ЦУУРГИЙН ТҮВШИН knob to blend the wet (effected) signal with your dry signal.
6. Add Spring Reverb: -ийг тохируулна уу ХАВАР knob to introduce the onboard spring reverb.

6.2 Shaping the Echo Tone

• REC LEVEL: For clean echoes, keep this knob lower. Increase it to introduce natural saturation and soft clipping characteristic of magnetic media.
• ДОТОО ХАСАХ: Use this to remove muddy low frequencies from your repeats, making them clearer and less intrusive.
• MECHANICS & WEAR: These knobs allow you to dial in the imperfections and character of vintage echo machines. Experiment with them to achieve desired vintage textures.
• ЗААВАЛ: The ЗАХИАЛГА switch alters the rhythmic relationship between the four virtual playback heads.
  • Бүр: Heads are equally spaced.
  • Triplet: Creates triplet-based rhythms.
  • Golden: Asymmetrical spacing for unique rhythmic patterns.
  • Мөнгө: Another asymmetrical spacing option.

6.3 Sound on Sound Looper Mode

The Volante features a mono Sound on Sound looper mode, inspired by classic tape looping techniques.

1. Engage Looper: -г барина уу TAP footswitch for approximately 1 second until the LED above it flashes. This enters Sound on Sound mode.
2. Бичлэг: The looper automatically starts recording when engaged. Play your phrase.
3. Давхардсан: After the initial loop is recorded, the looper automatically enters overdub mode. Play additional layers.
4. Зогсоох/Цэвэрлэх: дээр дарна уу ON footswitch to stop playback. Hold the ON footswitch to clear the loop.
5. Түр зогсоох: In Sound on Sound mode, hold the ХАЙРТАЙ footswitch to pause the loop.
6. Холболт: In Sound on Sound mode, hold the TAP footswitch to splice the loop, creating a new loop point.
7. Урвуу: While the loop is playing, hold the ON footswitch to reverse the loop playback.

6.4 Урьдчилан тохируулах

The Volante allows you to save and recall your favorite settings.

• Урьдчилсан тохиргоог хадгалах: Once you have dialed in your desired sound, press and hold the ХАЙРТАЙ footswitch until its LED flashes, then release. Your current settings are now saved to the Favorite preset.
• Урьдчилсан тохируулгыг эргэн санах: дээр дарна уу ХАЙРТАЙ footswitch to instantly recall your saved preset.
• Жич: The Volante supports up to 300 presets via MIDI, but only one "Favorite" preset is directly accessible via the footswitch.

7. Нарийвчилсан шинж чанарууд

7.1 Expression Pedal Control

Connect a standard expression pedal to the EXP jack to control various parameters in real-time. The specific parameter controlled can be configured via secondary functions or MIDI.

7.2 MIDI Implementation

The Volante offers extensive MIDI control for integration into complex setups.

• MIDI Control Change (CC): Most knobs and switches can be controlled via MIDI CC messages.
• Програмын өөрчлөлт (PC): Access up to 300 presets using MIDI Program Change messages.
• MIDI Clock Sync: Synchronize the delay tempo with external MIDI clock sources.
• Refer to the full MIDI Implementation Chart available on the Strymon webдэлгэрэнгүй мэдээллийг сайтаас авна уу.

8. Засвар үйлчилгээ

• Цэвэрлэгээ: Wipe the pedal with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• Хадгалах: Ашиглаагүй үедээ дөрөөг сэрүүн, хуурай газар, нарны шууд тусгал болон хэт өндөр температураас хол хадгална уу.
• Програм хангамжийн шинэчлэлтүүд: Periodically check the Strymon website for firmware updates. Updates can introduce new features or improve performance. Use the USB connection and the Strymon Updater software to perform updates.

9. Алдаа засах

10. Техникийн үзүүлэлтүүд

11. Баталгаат хугацаа ба дэмжлэг

11.1 Баталгаат хугацааны мэдээлэл

Strymon products are designed and built to high standards. For detailed warranty information, including coverage period and terms, please refer to the official Strymon webсайт эсвэл хэрэглэгчийн дэмжлэгтэй холбогдоно уу. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

11.2 Хэрэглэгчийн дэмжлэг

If you encounter any issues not covered in this manual or require further assistance, please visit the official Strymon support page or contact their customer service team. You can typically find contact information and FAQs on the Strymon webсайт.

Стримон Webсайт: www.strymon.net