LaMotte 2020t булингартай хэмжигч хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides detailed instructions for the proper setup, operation, and maintenance of the LaMotte 2020t Turbidity Meter. Adhering to these guidelines will ensure accurate measurements and extend the lifespan of your instrument. Please read this manual thoroughly before using the device.

2. Бүтээгдэхүүн дууссанview болон онцлог

The LaMotte 2020t Turbidity Meter is designed for precise turbidity measurements in various applications, including natural waters, mid-range industrial processes, and high-range environmental analysis. It is an advanced replacement for the 1970-ISO model.

Figure 2.1: The LaMotte 2020t Turbidity Meter handheld device, displaying a digital reading and control buttons.

Гол онцлогууд:

• 2020t Version: Optimized for natural waters, mid-range industrial applications, and high-range environmental applications.
• ISO 7027 Compliance: Meets design criteria for quantitative methods of turbidity using optical turbid meters as specified by ISO 7027, making it suitable for colored or extremely turbid samples.
• USB порт: Equipped with a USB port for data transfer and connectivity.
• Орлуулах загвар: Serves as a direct replacement for the 1970-ISO model.

Хайрцагт юу байгаа вэ:

Figure 2.2: The complete LaMotte 2020t Turbidity Meter Kit, including the meter, carrying case, sample cells, and calibration standards.

The LaMotte 2020t Turbidity Meter KIT typically includes:

• LaMotte 2020t Turbidity Meter
• Зөөврийн цүнх
• Sample Cells
• Calibration Standards (e.g., 0.02 NTU, 1.0 NTU, 10.0 NTU)
• USB кабель
• Эрчим хүчний адаптер
• Зааварчилгааны гарын авлага

3. Аюулгүй ажиллагааны заавар

Observe the following safety precautions to prevent injury and damage to the instrument:

• Always handle the meter and reagents with care.
• Do not immerse the meter in water or other liquids.
• Use only the specified power adapter and USB cable.
• Avoid dropping or subjecting the meter to severe impact.
• Төхөөрөмжийг хүчтэй соронзон орон болон хэт өндөр температураас хол байлга.
• Ensure proper ventilation when operating in enclosed spaces.
• Dispose of reagents and samples according to local regulations.

4. Анхны тохиргоо

4.1 Савлах, шалгах

1. Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
2. "Хайрцаг дотор юу байгаа вэ" хэсэгт жагсаасан бүх зүйлс байгаа эсэхийг шалгана уу.
3. Inspect the meter and accessories for any visible damage. If damage is found, contact LaMotte customer support immediately.

4.2 Тоолуурыг тэжээх

The 2020t Turbidity Meter can be powered via its internal rechargeable battery or directly through the provided power adapter.

• Зай цэнэглэх: Connect the power adapter to the meter's charging port and plug it into a standard electrical outlet. The battery indicator on the display will show charging status.
• Анхны төлбөр: Анхны хэрэглээний өмнө зайг бүрэн цэнэглэхийг зөвлөж байна.

4.3 Шалгалт тохируулга

Regular calibration ensures the accuracy of your turbidity measurements. Use the provided calibration standards.

1. Тоолуурыг дарж асаана уу ХҮЧ товч.
2. Access the calibration menu (refer to the on-screen prompts or specific section in the full manual for navigation).
3. Insert the lowest NTU standard (e.g., 0.02 NTU) into the sample compartment, ensuring the cell is clean and free of air bubbles.
4. Follow the on-screen instructions to perform the calibration for each standard, progressing from lowest to highest NTU value.
5. Confirm calibration completion.

5. Ашиглалтын заавар

5.1 Taking a Turbidity Measurement

1. С бэлтгэample Cell: s-г баталгаажуулна ууample cell is clean, dry, and free of scratches. Fill the cell with the sample to be tested, avoiding air bubbles.
2. С оруулахample Cell: Бэлтгэсэн s-г тавьample cell into the meter's sample compartment, aligning any marks as indicated by the instrument.
3. Хэмжилтийн горимыг сонгох: If applicable, select the desired measurement mode (e.g., single reading, average) using the navigation buttons.
4. Хэмжилтийг эхлүүлэх: дээр дарна уу ENTER or SCAN СAMPLE хэмжилтийг эхлүүлэх товчийг дарна уу.
5. Үр дүнг уншсан: The turbidity reading in NTU (Nephelometric Turbidity Units) will be displayed on the screen.
6. Мэдээлэл бичих: Manually record the reading or utilize the data logging features if available.

5.2 USB порт ашиглах

The integrated USB port allows for data transfer to a computer or for firmware updates.

• Connect the meter to a computer using the provided USB cable.
• The meter may appear as a removable storage device or require specific software (refer to LaMotte's website for software downloads).
• Follow the software instructions to download stored data or update firmware.

6. Засвар үйлчилгээ

6.1 Cleaning the Meter and Sample Cells

• Meter Exterior: Тоолуурын гадна талыг зөөлөн, d-ээр арчинаamp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Sample Cells: Цэвэр сample cells thoroughly after each use. Rinse with distilled or deionized water and dry with a lint-free cloth. Avoid scratching the cell surfaces, as this can affect readings.
• Sample Compartment: s-г хадгалample compartment clean and free of dust or spills. Use a soft brush or compressed air if necessary.

6.2 Хадгалалт

When not in use, store the LaMotte 2020t Turbidity Meter in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged if storing for extended periods.

7. Алдаа засах

If you encounter problems not listed here, or if solutions do not resolve the issue, please contact LaMotte customer support.

8. Техникийн үзүүлэлтүүд

• Загварын дугаар: 2020 тонн
• Хэмжилтийн зарчим: Nephelometric (ISO 7027 compliant)
• Гэрлийн эх үүсвэр: гянт болд лamp
• Интерфэйс: USB порт
• Эрчим хүч: Internal rechargeable battery, AC adapter
• Хэмжээ (ойролцоогоор): Refer to product packaging for exact dimensions (e.g., 17.32 x 12.72 x 4.76 inches)
• Жин (ойролцоогоор): Refer to product packaging for exact weight (e.g., 1 Pound)
• Үйлдвэрлэгч: ЛаМотте
• Эхний боломжтой: 14 оны гуравдугаар сарын 2019

9. Баталгаат хугацаа ба хэрэглэгчийн дэмжлэг

LaMotte products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official LaMotte website. For technical assistance, replacement parts, or service inquiries, please contact LaMotte customer support directly.

You can find more information about LaMotte products and support on their official Amazon store page: LaMotte Amazon Store.