BFT Phobos BT A40 (Model 2611950)

BFT Phobos BT A40 Automatic Double Swing Gate Operator User Manual

Model: Phobos BT A40 (Model 2611950)

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of the BFT Phobos BT A40 automatic double swing gate operator. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Complete BFT Phobos BT A40 automatic double swing gate operator kit including actuators, control panel, remote controls, photocells, and flashing lamp.

Зураг 1: Илүүview of the BFT Phobos BT A40 Kit Components.

2. Аюулгүй байдлын мэдээлэл

Тоног төхөөрөмжийг гэмтээх, гэмтээхээс сэргийлэхийн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.

  • Суурилуулалтыг орон нутгийн дүрэм журмын дагуу мэргэшсэн ажилтнууд гүйцэтгэх ёстой.
  • Disconnect power before performing any maintenance or installation work.
  • Ашиглалтын явцад хүүхэд, гэрийн тэжээвэр амьтдыг хаалганы хэсгээс хол байлга.
  • Хэрэв ямар нэгэн эд анги эвдэрсэн эсвэл ажиллахаа больсон бол хаалгыг ажиллуулж болохгүй.
  • Ensure all safety devices (photocells, emergency stop) are correctly installed and functioning.
  • In case of power failure, use the provided emergency release keys to manually open the gate.

3. Бүрэлдэхүүн хэсгүүдийг багтаасан

The BFT Phobos BT A40 kit typically includes the following components:

  • 2 x BFT PHOBOS BT A40 electromechanical actuators with fixings.
  • 1 x BFT THALIA LIGHT control panel with integrated radio receiver (memory for 63 manual transmitters).
  • 1 x Control panel housing (hermetic).
  • 3 x BFT MITTO B4 4-channel remote controls.
  • 1 x BFT Radius LED BT A R1 flashing lamp with antenna.
  • 1 x Pair of BFT Compacta A20-180 pivoting photocells (transmitter and receiver).
  • 4 x Keys for emergency gate opening in case of power failure.
  • Mounting brackets for posts and gate leaves.
  • Various small parts and accessories for installation (e.g., nuts, bolts, seals).
Various small parts and accessories for the BFT gate operator installation, including nuts, bolts, and seals.

Figure 2: Small Parts and Accessories.

4. Тохиргоо ба суурилуулалт

This section outlines the general steps for installing the BFT Phobos BT A40 system. Professional installation is highly recommended.

4.1 Хөдөлгүүрийн суурилуулалт

Install the two BFT PHOBOS BT A40 electromechanical actuators on each gate leaf. Ensure the mounting brackets are securely fastened to both the gate post and the gate leaf. The maximum distance between the edge of the post and the hinge axis should be up to 8 cm.

Two BFT PHOBOS BT A40 electromechanical actuators and the BFT THALIA LIGHT control unit.

Figure 3: BFT PHOBOS BT A40 Actuators and THALIA LIGHT Control Unit.

Metal mounting brackets for attaching the gate operator to the gate and post.

Figure 4: Mounting Brackets.

The magnetic limit switch system ensures maximum operating precision and very easy and quick adjustment. The integrated adjustable limit switch means there is no need to use bumpers screwed to the ground.

4.2 Control Panel Installation

Mount the BFT THALIA LIGHT control panel in its hermetic housing in a protected location, typically near the gate. Connect the actuators, power supply, and all safety devices to the control panel according to the wiring diagram provided in the full installation manual (not included in this summary).

4.3 Photocell Installation

Install the BFT Compacta A20-180 pivoting photocells on opposite sides of the gate opening, ensuring they are aligned. These photocells provide a safety barrier, preventing the gate from closing if an obstruction is detected.

A pair of BFT Compacta A20-180 pivoting photocells.

Figure 5: BFT Compacta A20-180 Pivoting Photocell Pair.

4.4 Flashing Lamp Суурилуулалт

Mount the BFT Radius LED BT A R1 flashing lamp in a visible location. This lamp provides a visual warning when the gate is in motion.

A BFT Radius LED BT A R1 flashing lamp with integrated antenna.

Figure 6: BFT Radius LED BT A R1 Flashing Lamp.

5. Ашиглалтын заавар

The BFT Phobos BT A40 system is designed for automatic operation of double swing gates.

5.1 Алсын удирдлагатай ажиллагаа

Use the BFT MITTO B4 4-channel remote controls to operate the gate. Each button can be programmed for different functions (e.g., open/close both leaves, open/close single leaf, pedestrian access). Refer to the control panel manual for remote control programming instructions.

Three BFT MITTO B4 4-channel remote controls.

Figure 7: BFT MITTO B4 Remote Controls.

5.2 Автомат ажиллагаа

Once activated, the gate will open or close automatically. The D-TRACK technology ensures complete application safety by optimally selecting the necessary forces at each point of the automation's operation. The system will detect obstructions via the photocells and reverse or stop to prevent damage or injury.

5.3 Emergency Manual Release

In the event of a power failure, use the provided emergency keys to manually unlock and open the gate. Insert the key into the actuator's release mechanism and turn it as indicated in the actuator's specific manual.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and reliable operation of your BFT gate operator.

  • Сар бүр: Check the gate's movement for any unusual noises or resistance. Ensure the photocells are clean and unobstructed. Test the safety features.
  • Улирал бүр: Inspect all mounting points and fasteners for tightness. Check the condition of the actuator's screw nut; the modernized design (deeper screw nut) reduces the possibility of accidental contamination of the mechanism, but regular inspection is still advised.
  • Жил бүр: Have the system inspected by a qualified technician.
  • Keep the area around the gate clear of debris and vegetation.

7. Алдаа засах

This section addresses common issues you might encounter. For complex problems, contact a qualified technician.

АсуудалБоломжит шалтгаанШийдэл
Хаалга нь алсын удирдлагад хариу өгөхгүй.Dead remote battery, remote out of range, power failure, remote not programmed.Replace battery, move closer to gate, check power supply, reprogram remote.
Gate stops or reverses during closing.Obstruction detected by photocells, D-TRACK system detecting unusual resistance.Clear obstruction from photocell path, clean photocells, check gate for physical obstructions or binding.
анивчсан лamp ажиллахгүй байна.Lamp bulb faulty, wiring issue.Check connections, replace lamp шаардлагатай бол.
Хаалга удаан эсвэл хүндрэлтэй ажилладаг.Бага ботьtage, mechanical friction, actuator issue.Check power supply, lubricate gate hinges, contact technician.

8. Техникийн үзүүлэлтүүд

Key technical specifications for the BFT Phobos BT A40 system:

  • Загвар: Phobos BT A40
  • Үйлдвэрлэгч: BFT
  • Хөдөлгүүрийн төрөл: 24V Electromechanical irreversible drive
  • Max Gate Leaf Length: Up to 4 meters (13.1 ft) per leaf
  • Max Gate Leaf Weight: Up to 250 kg (551 lbs) per leaf
  • Бүтээгдэхүүний хэмжээс (L x W x H): 26 x 18 x 14 см (10.2 x 7.1 x 5.5 инч)
  • Бүтээгдэхүүний жин: 2.21 кг (4.87 фунт)
  • Өнгө: Мөнгө
  • Лавлах дугаар: OGBBFTADB0037
  • Article Model Number: 2611950
Technical drawing showing dimensions of BFT Phobos BT A25 and A40 actuators with a table of measurements.

Figure 8: Actuator Dimensions (Phobos BT A40 relevant).

9. Баталгаат хугацаа ба дэмжлэг

Information regarding product warranty and availability of spare parts is not explicitly provided in this manual. Please refer to your purchase documentation or contact your BFT dealer for details on warranty coverage and spare parts availability.

Холбогдох баримт бичиг - Phobos BT A40 (Model 2611950)

Урьдчилсанview BFT Phobos BT A25/A40 Piston Automations for Swing Gates Installation Manual
Comprehensive installation manual for BFT Phobos BT A25 and A40 piston automations for swing gates. Covers safety instructions, technical specifications, installation diagrams, wiring, and maintenance.
Урьдчилсанview BFT Phobos BT Kit UL Шуурхай лавлах гарын авлага
BFT Phobos BT Kit UL автомат хаалга онгойлгох системийн шуурхай лавлах гарын авлага нь суурилуулалт, утас, програмчлал, алдааг олж засварлахыг хамарна.
Урьдчилсанview Installazione BFT THALIA гарын авлага: Automazione Cancelli-ийн Quadro Comandi
Questa guida dettagliata illustra l'installazione e la configurazione del quadro comandi BFT THALIA, progettato per l'automazione di cancelli e porte. Үр ашигтай ажиллах баталгааг хангах тусгай техник, хамтын ажиллагааны схемийг оруулна уу.
Урьдчилсанview BFT GIUNO ULTRA BT A20 / GIUNO ULTRA BT A50 Поршений автоматжуулалтын суурилуулалтын гарын авлага
Савлууртай хаалганы BFT GIUNO ULTRA BT A20 болон GIUNO ULTRA BT A50 гидравлик поршений автоматжуулалтын цогц суурилуулалтын гарын авлага. Техникийн үзүүлэлт, угсралт, утас, тохируулга болон аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг хамарсан болно.
Урьдчилсанview BFT ELI BT A35 V / ELI BT A40 & ELI AC A35 V / ELI AC A40 Суурилуулалт ба хэрэглэгчийн гарын авлага
Савлуур хаалганы BFT ELI BT A35 V, ELI BT A40, ELI AC A35 V, ELI AC A40 цахилгаан механик идэвхжүүлэгчийг суурилуулах, ашиглах дэлгэрэнгүй гарын авлага. Аюулгүй байдлын зааварчилгаа, суурилуулах журам, техникийн өгөгдөл, засвар үйлчилгээ зэргийг хамарна.
Урьдчилсанview BFT VIRGO Swing Gate Automation Installation Manual
Comprehensive installation and user guide for the BFT VIRGO swing gate automation system, covering safety, technical specifications, installation procedures, programming, and maintenance.