Nora Lighting Josh LED Puck Light User Manual

Танилцуулга

Thank you for choosing the Nora Lighting Josh LED Puck Light. This manual provides essential information for the safe installation, operation, and maintenance of your LED puck light. Please read these instructions thoroughly before installation and and keep them for future reference.

The Josh LED Puck Light is a versatile, low-profile lighting solution designed for accent, under-cabinet, in-cabinet, niche, and jewelry case applications. Its slim design allows for flexible placement and provides even illumination. This LED fixture is designed for either recessed or surface mounting.

Аюулгүй байдлын чухал мэдээлэл

• АНХААРУУЛГА: Цахилгаанд цохиулах эрсдэл. Суурилуулалт, засвар үйлчилгээ хийхээс өмнө гал хамгаалагч эсвэл таслагчийн хүчийг салга.
• Энэхүү бүтээгдхүүнийг уг бүтээц, ашиглалт, учирч болох аюулын талаар сайн мэддэг хүн холбогдох суурилуулах кодын дагуу суурилуулсан байх ёстой.
• Use only with a 12V DC dimmable power supply (sold separately). Ensure the power supply is compatible with LED lighting.
• Төхөөрөмж болон түүний эд ангиудыг өөрчилж болохгүй. Аливаа өөрчлөлт нь баталгааг хүчингүй болгож, аюулгүй байдлын эрсдэл үүсгэж болзошгүй.
• LED гэрлийн эх үүсвэр асаалттай үед шууд харахаас зайлсхий.
• Ensure proper ventilation around the fixture and power supply.
• Шатамхай материалаас хол байлга.
• This fixture is suitable for dry locations only.

Багцын агуулга

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

• Nora Lighting Josh LED Puck Light (Model NMP-LED30BZ)
• Mounting hardware (screws, clips, etc. - specific hardware may vary)
• Хэрэглэх заавар (энэ баримт бичиг)

Note: A 12V DC dimmable power supply is required and sold separately.

Суурилуулах заавар

The Josh LED Puck Light can be installed as either a recessed or surface-mounted fixture.

Суурилуулсан бэхэлгээ

1. Нээлтийн үйл ажиллагааг бэлтгэх: Cut a circular hole in the desired mounting surface. Refer to the specifications section for the exact cutout diameter. Ensure there is sufficient clearance behind the mounting surface for the fixture.
2. Утас: Route the 12V DC wiring from your power supply to the installation location. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity (positive to positive, negative to negative).
3. Бэхэлгээ оруулах: Gently push the puck light into the prepared opening. The spring clips (if present) will secure the fixture in place.

Гадаргууг суурилуулах

1. Суурилуулах цэгүүдийг тэмдэглэх: Position the puck light in the desired location. Mark the screw hole positions on the mounting surface.
2. Secure Mounting Plate/Clips: If a separate mounting plate or clips are provided, secure them to the surface using the supplied screws.
3. Утас: Route the 12V DC wiring from your power supply. Connect the fixture's wires to the 12V DC power supply output, ensuring correct polarity.
4. Хавсаргах бэхэлгээ: Secure the puck light to the mounting plate or clips. Ensure the fixture is firmly attached.

Image: The Nora Lighting Josh LED Puck Light in a bronze finish, shown from an angled top-down view. The light features a circular design with a central frosted diffuser and a textured bronze outer ring, suitable for both recessed and surface mounting.

After installation, connect the 12V DC power supply to a suitable power source. Test the light fixture.

Ашиглалтын заавар

The Nora Lighting Josh LED Puck Light operates on a 12V DC power supply. Once properly installed and connected to a compatible power source, the light can be controlled via the switch or dimmer connected to your 12V DC power supply.

• Асаах/унтраах: Use the wall switch or inline switch connected to your 12V DC power supply to turn the light on or off.
• Бүдэгрүүлж байна: If using a dimmable 12V DC power supply and a compatible dimmer switch, you can adjust the brightness of the puck light. Ensure the dimmer is rated for LED loads.

The LED technology provides instant illumination without flicker, delay, or warm-up time.

Засвар үйлчилгээ

The Nora Lighting Josh LED Puck Light requires minimal maintenance.

• Цэвэрлэгээ: Цэвэрлэхийн өмнө цахилгааныг салга. Зөөлөн, хуурай эсвэл бага зэрэг хуурай цэвэрлэгч ашиглана уу.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or optical components.
• LED урт наслалт: Нэгдсэн LED гэрлийн эх үүсвэр нь урт хугацааны туршид зориулагдсан бөгөөд солих шаардлагагүй.
• Шалгалт: Periodically inspect the wiring and connections for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified electrician.

Алдааг олж засварлах

If troubleshooting steps do not resolve the issue, contact Nora Lighting customer support or a qualified electrician.

Үзүүлэлтүүд

Note: Dimensions for cutout and fixture size are not provided in the source data. Please refer to product packaging or Nora Lighting's official webнарийн хэмжилт хийх сайт.

Баталгаат болон дэмжлэг

For warranty information, technical support, or to inquire about replacement parts, please contact Nora Lighting directly through their official webсайт эсвэл харилцагчийн үйлчилгээний сувгууд.

Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгална уу.