Бүтээгдэхүүн дууссанview
The Lepro RGB LED Strip Lights are designed to provide vibrant, color-changing illumination for various indoor applications. This 16.4ft (5m) flexible strip features 150 5050 SMD LEDs, offering primary Red, Green, Blue (RGB) colors, white, and 16 multicolored options. It comes with a 44-key IR remote controller and a 24V power adapter for easy plug-and-play setup. These lights are ideal for enhancing the ambiance of living rooms, bedrooms, dining rooms, kitchens, desks, cabinets, and are particularly suitable for holiday decorations.

Image: Complete kit of Lepro RGB LED Strip Lights, showing the coiled strip, remote control, and power supply.
Key features include ultra-high brightness, a wide range of color options with DIY customization, 8 lighting modes, and adjustable brightness levels. The strip utilizes strong 3M adhesive for easy installation, complemented by extra mounting brackets/fixing clips to ensure secure placement.

Зураг: Жишээ ньamples of the LED strip lights installed in different home environments, such as behind a TV, under kitchen cabinets, and along a bar counter.
Хайрцагт юу байна
- 1x 150 SMD 5050 LEDs 16.4ft/5m non-waterproof RGB strip
- 1x 44 key IR remote controller
- 1x 2A 12V power adapter (US Plug)
- Extra mounting brackets/fixing clips
Тохируулах гарын авлага
LED туузыг зөв суурилуулахын тулд дараах алхмуудыг дагана уу.
- Гадаргууг бэлтгэх: Ensure the surface where you intend to install the strip lights is clean, dry, and smooth. Wipe it thoroughly to remove any dust or debris.
- Туузыг хэрэглэнэ: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length.
- Cut to Length (Optional): If the strip is too long for your application, you can cut it at designated cutting marks (usually indicated by a copper line and a scissor icon). Do not cut at any other point, as this may damage the strip.
- Клипээр хамгаалах: For added security, especially on textured surfaces or in areas where the adhesive might weaken over time, use the provided fixing clips. Space them evenly along the strip and secure them with small screws or appropriate fasteners.
- Эрчим хүчийг холбох: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 12V power adapter. Plug the power adapter into a standard electrical outlet.

Image: Visual instructions demonstrating the installation process, from preparing the surface to securing the strip with clips.

Image: Detail showing the strong 3M adhesive on the back of the strip and the included fixing clips for enhanced stability.
Ашиглалтын заавар
Your Lepro RGB LED Strip Lights are controlled by the included 44-key IR remote. Ensure the remote is pointed directly at the IR receiver connected to the LED strip for optimal performance.

Image: The 44-key remote control, detailing its various functions for color selection, brightness adjustment, and mode changes.
Алсын удирдлагын функцууд:
- Асаах/унтраах: Use the red and green buttons at the top right to turn the lights on or off.
- Гэрэлтүүлгийн тохируулга: The two arrow buttons (up/down) below the power buttons control the brightness (5 levels available).
- Статик өнгө: Select from 20 static colors using the color grid buttons.
- Өөрөө хийх өнгөнүүд: Use the DIY1-DIY6 buttons to create and save your custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Динамик горимууд: Choose from 8 dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the buttons on the bottom right.
- Хурдны тохируулга: For dynamic modes, use the 'QUICK' and 'SLOW' buttons to adjust the transition speed (5 levels available).
Засвар үйлчилгээ, арчилгаа
To ensure the longevity and optimal performance of your Lepro RGB LED Strip Lights, follow these maintenance guidelines:
- Цэвэрлэгээ: LED туузыг хуурай зөөлөн даавуугаар зөөлөн арчиж тоосыг арилгана. Шингэн цэвэрлэгч, зүлгүүрийн материал ашиглахаас зайлсхий.
- Усны эсэргүүцэл: Энэ бүтээгдэхүүн нь усанд тэсвэртэй биш. Avoid exposing the LED strip, power adapter, or remote control to water or high humidity. Install only in indoor, dry environments.
- Харьцуулах: Do not bend the LED strip sharply or apply excessive force, as this can damage the internal circuitry.
- Эрчим хүчний хангамж: Always use the original power adapter provided with the kit. Using an incompatible power supply may damage the lights or pose a safety risk.
Алдааг олж засварлах
If you encounter issues with your LED strip lights, refer to the following common solutions:
- Гэрэл асахгүй байна:
- Check all connections to ensure they are secure between the LED strip, IR receiver, and power adapter.
- Verify that the power adapter is properly plugged into a working electrical outlet.
- Алсын удирдлага ажиллаж байгаа батерейтай бөгөөд хэт улаан туяаны хүлээн авагч руу шууд чиглүүлэгдсэн эсэхийг шалгаарай.
- Чухал зөвлөгөө: If the lights are not working or not displaying colors correctly, ensure the 4-pin connector from the LED strip is inserted correctly into the IR receiver. Sometimes, the pins may be inserted backward. If this is the case, try unplugging and re-inserting the connector in the opposite orientation. After re-inserting, press the 'Blue' color button, then the 'Power' button, and then the 'Fade 7' button on the remote repeatedly until the lights function correctly.
- Алсын удирдлага хариу өгөхгүй байна:
- Алсын удирдлагад зайгаа солино уу.
- Ensure there are no obstructions between the remote and the IR receiver.
- Colors Not Matching Remote:
- This can often be resolved by re-calibrating the remote. Try the 'Important Tip' mentioned above (Blue button, Power button, Fade 7 repeatedly).
Бүтээгдэхүүний техникийн үзүүлэлтүүд
| Тодорхойлолт | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 410082-RGB-US |
| Өнгө | RGB (Улаан, Ногоон, Цэнхэр) |
| Брэнд | Лепро |
| Дотор/гадаа ашиглах | Дотор |
| Онцлог шинж чанар | Adjustable, Color Changing |
| Гэрлийн эх үүсвэрийн төрөл | LED |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Цайвар өнгө | RGB |
| Материал | Зэс, хуванцар |
| Хянагчийн төрөл | Алсын удирдлага |
| Холболтын технологи | Хэт улаан туяа |
| Гэрлийн эх үүсвэрийн тоо | 150 |
| Ботьtage | 12 вольт |
| Ватtage | 24 ватт |
| Зүйлийн жин | 0.22 килограмм (7.7 унц) |
| Бүтээгдэхүүний хэмжээс | 5.43 x 5.51 x 2.8 инч |
| Усны эсэргүүцлийн түвшин | Усанд тэсвэртэй биш |
| Батерей шаардлагатай | 1 А батерей (алсын удирдлагад зориулагдсан) |
Баталгаат болон дэмжлэг
Lepro products are designed for quality and reliability. For specific warranty information regarding your LED Strip Lights, please refer to the documentation included with your purchase or visit the official Lepro webсайт.
For further assistance, technical support, or to explore other Lepro products, please visit the Амазон дээрх Lepro дэлгүүр.





