SEBSON HF Motion Detector Instruction Manual

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON HF Motion Detector (Model 2_X_HF_CEIL_A). Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Зураг 1.1: Урд view of the SEBSON HF Motion Detector. This image shows the circular, white casing of the motion detector, designed for discreet ceiling surface mounting.

2. Аюулгүй ажиллагааны заавар

• Суурилуулалтыг үндэсний цахилгааны холболтын дүрэм журмын дагуу мэргэшсэн цахилгаанчин гүйцэтгэх ёстой.
• Disconnect power before installation or any maintenance.
• Do not exceed the maximum load capacity: 800W for incandescent lamps, 300W for LED or other energy-saving lamps.
• This device is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
• Суурилуулах гадаргуу нь тогтвортой бөгөөд төхөөрөмжийг дэмжиж чадах эсэхийг шалгаарай.
• Хүүхдийн гар хүрэхгүй газар хадгална.

3. Бүтээгдэхүүн дууссанview

The SEBSON HF Motion Detector utilizes high-frequency (HF) technology to detect movement within its coverage area. It is designed for ceiling surface mounting and offers adjustable settings for optimal performance in various indoor environments.

Гол онцлогууд:

• High-Frequency Sensor: Detects movement through non-metallic objects like thin walls or doors.
• Өргөн хамрах хүрээ: 360° detection angle with a range of 2 to 16 meters.
• Тохируулах тохиргоо: Time delay (10 seconds to 12 minutes), sensitivity (detection range), and ambient light threshold (3-2000 lux).
• LED нийцтэй: Supports up to 300W for LED lamps and 800W for incandescent lamps.
• Компакт дизайн: Circular, white casing with dimensions of Ø100x22mm.

Зураг 3.1: Дууслааview of the motion detector highlighting its key specifications including detection range, LED compatibility, IP rating, time delay, lux range, and voltage.

4. Техникийн үзүүлэлтүүд

Image 4.1: Technical drawing showing the dimensions of the motion detector: 100mm diameter and 22mm height.

5. Суулгалт (Тохируулга)

Чухал: Ensure the main power supply is switched off before commencing installation.

1. Байршлыг сонгох: Select a suitable indoor ceiling location for surface mounting. Avoid placing near heat sources, air conditioning vents, or areas with significant air movement, which can interfere with detection.
2. Утас бэлтгэх: c-г нээхasing of the motion detector. You will find terminals for Live (L), Neutral (N), and Switched Live (L').
3. Уулын суурь: Secure the base of the motion detector to the ceiling using appropriate screws and wall plugs. Ensure the cable entry points are aligned.
4. Утасны холболтууд:
   • Connect the incoming Live wire to the 'L' terminal.
   • Connect the incoming Neutral wire to the 'N' terminal.
   • Connect the Live wire to your light fixture (load) to the 'L'' terminal.
   • Connect the Neutral wire from your light fixture (load) to the 'N' terminal (shared with incoming neutral).
   

   Зураг 5.1: Ар талд view of the motion detector, illustrating the wiring terminals (L, N, L') and the three adjustable dials for TIME, SENS, and LUX settings.

5. Хаах Casing: Once wiring is complete and secure, reattach the main body of the detector to its base.
6. Эрчим хүчийг сэргээх: Switch on the main power supply. The detector will enter a warm-up period (typically 30-60 seconds) during which it may switch on and off randomly.

6. Operation and Settings Adjustment

The SEBSON HF Motion Detector features three adjustable dials to customize its operation:

• TIME (Цагийн саатал): Controls how long the connected light remains on after the last detected movement.
  • 10 секундээс 12 минутын хооронд тохируулах боломжтой.
  • Turn clockwise to increase the time delay, counter-clockwise to decrease.
• SENS (Sensitivity/Detection Range): Adjusts the detection range of the HF sensor.
  • Adjustable from 2 meters to 16 meters.
  • Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
  • Consider the environment to avoid unwanted detections (e.g., through thin walls).
• LUX (Ambient Light Threshold): Determines the ambient light level at which the sensor will activate the connected light.
  • 3 люкс (харанхуй)-аас 2000 люкс (өдрийн гэрэл) хүртэл тохируулж болно.
  • Turn towards the sun icon for activation in brighter conditions (daylight).
  • Turn towards the moon icon for activation only in darker conditions (night).

Зураг 6.1: Нарийвчилсан view of the three rotary dials on the motion detector, labeled TIME, SENS, and LUX, used for fine-tuning operational parameters.

Image 6.2: A diagram showing the 360° detection pattern and adjustable range (2-16m) from a ceiling mount, along with visual representations of the LUX, SENS, and TIME adjustment dials.

7. Засвар үйлчилгээ

The SEBSON HF Motion Detector requires minimal maintenance. Follow these guidelines:

• Цэвэрлэгээ: Gently wipe the surface of the detector with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
• Шалгалт: Periodically check for any visible damage to the casing or wiring. If any damage is found, disconnect power and consult a qualified electrician.
• Байгаль орчны нөхцөл: Ensure the operating environment remains within the specified indoor conditions (IP20).

8. Алдаа засах

9. Баталгаат хугацаа ба дэмжлэг

SEBSON products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official SEBSON website. If you encounter any issues or require technical assistance, please contact SEBSON customer support through their official channels.

Дэлгэрэнгүй мэдээлэл авахыг хүсвэл зочилно уу: www.sebson.de