Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge Instruction Manual

1. Бүтээгдэхүүн дууссанview

The Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge (Model 69ELF114TWG) is designed to reduce incoming water pressure to a safe and consistent level for residential and commercial plumbing systems. This unit features a compact design, lead-free bronze construction, and an integrated internal bypass mechanism. It includes a color-coded gauge for easy pressure monitoring and adjustment.

Figure 1: Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge. This image shows the regulator with its integrated pressure gauge and yellow adjustment handle.

2. Аюулгүй байдлын мэдээлэл

• Суурилуулалт эсвэл засвар үйлчилгээ эхлэхээс өмнө гол усны хангамжийг үргэлж хаа.
• Хамгаалалтын шил, бээлий гэх мэт хувийн хамгаалалтын хэрэгслийг (PPE) өмс.
• Нэвчилтээс урьдчилан сэргийлэхийн тулд бүх холболтыг сайтар битүүмжилсэн эсэхийг шалгаарай.
• Consult local plumbing codes and regulations for proper installation procedures.
• Хэрэв та угсралтын аль нэг хэсэгт эргэлзэж байвал мэргэшсэн сантехникчтэй зөвлөлдөөрэй.

3. Багцын агуулга

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

• 1x Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator
• 1x Integrated Pressure Gauge

4. Суурилуулалт

This regulator features a double union PEX-A (cold expansion) barb design for simplified installation in PEX-A piping systems. Ensure the regulator is installed in the correct flow direction, indicated by an arrow on the body.

1. Суулгах газрыг бэлтгэх: Turn off the main water supply. Drain the water lines to relieve pressure. Select a suitable location for the regulator, typically after the main shut-off valve and before any branch lines.
2. Cut and Prepare PEX-A Piping: Cut the PEX-A pipe to the required length, ensuring clean, square cuts. Prepare the pipe ends for cold expansion connections according to PEX-A system manufacturer guidelines.
3. Зохицуулагчийг холбоно уу:
   • Apply appropriate thread sealant (e.g., Teflon tape or pipe dope) to the male threads of the PEX-A fittings.
   • Thread the PEX-A fittings onto the double union ends of the regulator. Ensure the flow arrow on the regulator body points in the direction of water flow into the building.
   • Tighten the union nuts securely, but do not overtighten.
   • Perform cold expansion connections on the PEX-A pipe ends to the fittings according to PEX-A system manufacturer instructions.
4. Даралт хэмжигч суурилуулах: The pressure gauge is typically pre-installed. Ensure it is securely threaded into the designated port on the regulator body.
5. Усны хангамжийг сэргээж, гоожиж байгаа эсэхийг шалгана уу: Slowly turn on the main water supply. Carefully inspect all connections for any signs of leaks. Tighten connections as necessary.

Зураг 2: Хажуу тал view of the Apollo Water Pressure Regulator, showing the double union PEX-A connections and the flow direction arrow. Note the "MAX INLET 400 PSI" marking.

5. Ашиглалтын заавар

The regulator is factory-set at 50 psi and is adjustable from 15 psi to 75 psi. No special tools are required for adjustment.

1. Одоогийн даралтыг шалгах: Observe the reading on the integrated pressure gauge. The gauge is color-coded to indicate pressure ranges (e.g., Low, Optimal, Excessive).
2. Даралтыг тохируулах:
   • руу нэмэгдүүлэх pressure: Turn the yellow adjustment handle цагийн зүүний дагуу.
   • руу буурах pressure: Turn the yellow adjustment handle цагийн зүүний эсрэг.
   • Make small adjustments and allow the system pressure to stabilize before re-checking the gauge.
3. Тохиргоог баталгаажуулах: Once the desired pressure is achieved (typically between 50-60 psi for most residential applications), confirm the reading on the gauge.

Зураг 3: Ойрын зураг view of the Apollo Water Pressure Regulator, highlighting the pressure gauge with its color-coded optimal range and the yellow adjustment handle.

6. Засвар үйлчилгээ

The Apollo Water Pressure Regulator is designed for minimal maintenance. Regular checks can help ensure optimal performance.

• Periodic Pressure Check: Periodically check the pressure gauge to ensure the system pressure remains at the desired setting. Fluctuations may indicate a need for adjustment or inspection.
• Нэвчилтийг шалгах: Annually inspect the regulator and connections for any signs of leaks or corrosion.
• Цэвэрлэгээ: Clean the exterior of the regulator with a damp шаардлагатай бол даавуугаар арчина. Хүчтэй химийн бодис бүү хэрэглээрэй.
• Sediment Filter (Optional): If your water supply contains significant sediment, consider installing a sediment filter upstream of the pressure regulator to prevent internal clogging.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

• Загвар: 69ELF114TWG
• Материал: Хүрэл
• Оролтын холболтын хэмжээ: 3/4 инч
• Оролтын холболтын төрөл: Cross Linked Polyethylene (PEX-A)
• Гаралтын холболтын төрөл: PEX
• Ажлын хамгийн их даралт: 400 PSI (Inlet)
• Тохируулж болох даралтын хүрээ: 15 - 75 PSI (Factory-set at 50 PSI)
• Хэмжээ (L x W x H): 2.13 x 7 x 8 инч
• Барааны жин: 2.53 фунт
• Баталгаажуулалт: Certified to ASSE 1003 and CSA B356, listed by ASSE and IAPMO (cUPC)
• Онцлог шинж чанарууд: Integrated internal bypass mechanism, Color-coded gauge

9. Баталгаат хугацаа ба дэмжлэг

This Apollo Water Pressure Regulator comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Apollo customer support.

For technical support or inquiries, please visit the official Apollo webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу.