1. Бүтээгдэхүүн дууссанview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Өндөр хүчин чадалтай мотор: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Эргономик дизайн: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Аюулгүй ажиллагааны заавар
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Ерөнхий аюулгүй байдал
- Хамгаалалтын шил, сонсголын хамгаалалт, бээлий, тоосны маск зэрэг зохих хувийн хамгаалалтын хэрэгслийг (PPE) үргэлж өмс.
- Ажлын хэсэг найдвартай байгаа эсэхийг шалгаарай clampмэс заслын өмнө засварласан.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд багажийг ажиллуулж болохгүй.
- Цахилгаан хэрэгсэл ажиллуулж байх үед хүүхдүүд болон хажууд байгаа хүмүүсийг хол байлга.
Цахилгааны аюулгүй байдал
- Эрчим хүчний хангамжийн хэмжээг баталгаажуулна ууtage matches the rating on the tool's nameplate.
- Утсыг бүү ашигла. Цахилгаан хэрэгслийг зөөх, татах, залгуураас салгахад утсыг хэзээ ч бүү ашигла. Утсыг халуун, тос, хурц ирмэг, хөдөлгөөнт хэсгүүдээс хол байлга.
- Зар сурталчилгаанд цахилгаан хэрэгсэл ажиллуулж байгаа болamp Байршлаас зайлсхийх боломжгүй тул үлдэгдэл гүйдлийн төхөөрөмж (RCD) хамгаалагдсан хангамжийг ашиглана уу.
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Бүрэлдэхүүн хэсэг ба онцлог
Гол бүрэлдэхүүн хэсгүүд:
- Үндсэн хэсэг: Houses the motor, electronics, and gearbox.
- Хамгаалалтын хамгаалагч: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Спиндлийн түгжээний товчлуур: For easy disc changes.
- Слайд солих: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Агааржуулалтын нүх: For motor cooling and dust expulsion.
4. Тохиргоо
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Спиндлийн түгжээний товчлуурыг удаан дар.
- Дотор cl-ийг байрлуулampфланцыг гол дээр суулгана.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- cl дээр шурагamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Спиндлийн түгжээний товчлуурыг суллана.
5. Ашиглалтын заавар
Асаах/унтраах
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Хувьсах хурдны хяналт
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Нунтаглагчийг хоёр гараараа үргэлж чанга барь.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Цэвэрлэгээ
- Цэвэрлэхийн өмнө багажийг үргэлж салга.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Багажны гадна талыг зар сурталчилгаагаар арчинаamp даавуу. Хүчтэй химийн бодис, зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.
Нүүрстөрөгчийн сойз
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Хадгалах
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хэрэгсэл эхлэхгүй байна | Цахилгаан хангамж байхгүй Restart interlock activated (after power failure) Гэмтэлтэй цахилгааны утас | Цахилгааны холболтыг шалгана уу Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Ашиглалтын явцад багаж зогсдог | Хэт ачааллын хамгаалалт идэвхжсэн Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Хэт их чичиргээ | Worn or damaged disc Improperly mounted disc Сул бариул | Диск солих Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Элэгдсэн нүүрстөрөгчийн багс Dust buildup in vents | Үйлчилгээний төвд сойз шалгуулж/солилгуулна Clean air vents thoroughly |
8. Техникийн үзүүлэлтүүд
| Онцлог шинж чанартай | Үнэ цэнэ |
|---|---|
| Загварын дугаар | 447668 |
| Эрчим хүчний оролт | 1700 Вт |
| Эрчим хүчний гаралт | 1050 Вт |
| Ботьtage | 230 В |
| Давтамж | 50/60 Гц |
| Макс. Дискний диаметр | 125 мм |
| Ачаалалгүй хурд | 2800-11500 эрг / мин |
| Tool Holder (Angle Grinder) | M14 |
| Кабелийн урт | 4 м |
| Хэмжээ (L x W x H) | 340 x 77 x 105 мм |
| Жин | 2.6 кг |
| Өнгө | Red, Black, Silver |
| Материал | Металл |
9. Баталгаат хугацаа ба дэмжлэг
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webсайт эсвэл таны бүтээгдэхүүний сав баглаа боодол дээр.
