ONKRON G120-BLK Дан дэлгэц хананд суурилуулах зааварчилгааны гарын авлага
Model: G120-BLK
Танилцуулга
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Аюулгүй байдлын мэдээлэл
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
- 17.6 фунт (8 кг) жингийн багтаамжаас хэтрүүлж болохгүй.
- This mount is designed for monitors between 13 and 34 inches.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Суулгах явцад хүүхэд, тэжээвэр амьтдыг хол байлга.
Багцын агуулга
Суулгахаасаа өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- VESA хавтан
- Ханын хавтан
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Аллен түлхүүр (6мм)
- Зааварчилгааны гарын авлага
Тохиргоо ба суурилуулалт
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Суулгах видео гарын авлага
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Алхам 1: Өрөмдлөгийн цооногийг тэмдэглэх
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Алхам 2: Холбогчийг суурилуулах
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Эргээрэй цагийн зүүний эсрэг for lighter screens (to reduce tension).
- Эргээрэй цагийн зүүний дагуу for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewая тухтай байдал.
- Өндөр тохируулга: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Өргөтгөх/Татах: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Хазайлт: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred viewөнцөг.
- Эргэдэг: Swivel the monitor 180° left or right.
- Эргүүлэх: Rotate the monitor 360° for landscape or portrait orientation.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Кабелийн менежмент
Utilize the integrated cable management system to keep your workspace tidy.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Зураг: Ойролцоогоор view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны мониторын суурийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: Холбогчийг зөөлөн арчих, damp даавуу. Зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
- Тогтмол шалгалт: Бүх эрэг ба холболтыг нягт байлгахын тулд үе үе шалгаж байгаарай. Шаардлагатай бол дахин чангална.
- Хийн хаврын тохируулга: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Алдааг олж засварлах
Нийтлэг асуудлын шийдлийг энэ хэсгээс үзнэ үү.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хяналт нь унжиж эсвэл хүссэн өндөрт тогтдоггүй. | Хийн хаврын хурцадмал байдал нь мониторын жинд хэт бага байна. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | Хийн хаврын хурцадмал байдал нь мониторын жинд хэт өндөр байна. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Уул нь тогтворгүй эсвэл ганхаж байна. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Joints are too tight. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Үзүүлэлтүүд
- Загвар: G120-BLK
- Дэлгэцийн хэмжээтэй нийцтэй байдал: 13-34 инч
- Жингийн багтаамж: 2.2 - 17.6 фунт (1 - 8 кг)
- VESA нийцтэй байдал: 75х75мм, 100х100мм
- Өнцөгийг хазайлгах: +90°-аас -45° хүртэл
- Эргэдэг өнцөг: 180°
- Эргүүлэх: 360°
- Өндөр тохируулга: 11 инч (28 см)
- Гар сунгалт: 3.5 инч (8.9 см) - 13.7 инч (34.8 см)
- Материал: Хөнгөн цагаан
- Бүтээгдэхүүний хэмжээ: 16.34 x 2.28 x 6.61 инч (41.5 x 5.8 x 16.8 см)
- Барааны жин: 3.96 фунт (1.8 кг)
Баталгаат болон дэмжлэг
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON webсайт.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Холбоо барих мэдээлэл: Please refer to the ONKRON webхамгийн сүүлийн үеийн холбоо барих мэдээллийг авахын тулд сайт эсвэл бүтээгдэхүүний сав баглаа боодол.
