Танилцуулга
This manual provides detailed instructions for the installation, operation, and maintenance of the Kicker 46KISLOC2 K-Series Stereo Line-Output Converter. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
The Kicker 46KISLOC2 is designed to integrate aftermarket amplifiers with factory car audio systems by converting speaker-level signals into high-quality RCA line-level signals. It also provides a remote turn-on output for ampамьдрагчид.
Гол онцлогууд
- Converts speaker-level signals to RCA line-level signals.
- Provides a powerful 100 milli-amp, 12-volt remote turn-on output using DC offset, eliminating the need for a separate switched 12V source.
- Accepts input signals up to 55 watts (16 volts).
- Delivers an output signal up to 8 volts.
- Maintains a flat 20Hz-20kHz frequency response at all volume levels.
- Compatible with standard radios and most smart radios (amplifier output of smart radio must have 60Ω impedance or lower).
- Features an LED indicator for DC offset turn-on.
Багцын агуулга
Бүх зүйл багцад байгаа эсэхийг шалгана уу:
- Kicker 46KISLOC2 Line-Output Converter unit
- Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Аюулгүй байдлын мэдээлэл
АНХААРУУЛГА:
- Цахилгааны ажил хийхээсээ өмнө машины зайг үргэлж салга.
- Ensure proper wiring and connections to prevent short circuits or damage to the unit or vehicle's electrical system.
- Хэрэв та ямар нэгэн суулгах алхамын талаар эргэлзэж байвал мэргэжлийн машины аудио суурилуулагчтай зөвлөлдөөрэй.
- Төхөөрөмжийг чийг, хэт өндөр температурт бүү байлга.
Тохиргоо ба суурилуулалт
The KISLOC2 is designed for straightforward installation. Follow these steps carefully:
Холболтын диаграм
Refer to the diagram below for proper wiring connections. The KISLOC2 features input wires for speaker signals and output RCA jacks for line-level signals, plus a remote turn-on wire.
Image: Detailed wiring diagram for the Kicker 46KISLOC2, showing input wires (White: L+, White/BLK: L-, Grey: R+, Grey/BLK: R-, Black: Chassis Gnd) and output connections (Blue: 12V Remote out (100mA), RCAx2: Line level out). A red LED indicates DC offset turn-on activity.
Холболтын алхамууд
- Чанга яригчийн утсыг тодорхойлох: Чанга яригчийн утсыг үйлдвэрийн радионоос олох эсвэл amplifier that you intend to use as input for the KISLOC2. Typically, these are the rear speaker wires for subwoofer applications or full-range speakers for multi-channel ampөргөгчийн тохиргоо.
- Оролтын утсыг холбоно уу:
- -г холбоно уу Цагаан wire to the Left (+) speaker wire.
- -г холбоно уу Цагаан/Хар wire to the Left (-) speaker wire.
- -г холбоно уу Саарал wire to the Right (+) speaker wire.
- -г холбоно уу Саарал/Хар wire to the Right (-) speaker wire.
- -г холбоно уу Хар wire to a reliable chassis ground point in the vehicle.
- RCA гаралтыг холбох: Plug your RCA cables from the KISLOC2's RCA output jacks into the RCA input jacks of your aftermarket ampнастан.
- Connect Remote Turn-On: -г холбоно уу Цэнхэр wire from the KISLOC2 to the remote turn-on input of your aftermarket amplifier(s). This wire provides a 12V signal to turn on the amplifier when the factory radio is active.
- Нэгжийг хамгаалах: Mount the KISLOC2 in a secure, dry location away from excessive heat or moisture. Ensure wires are not pinched or exposed to sharp edges.
Зураг: Урд view of the Kicker 46KISLOC2 Line-Output Converter, showing the main unit with multiple colored wires extending from one end and two RCA output jacks on the other end. The KICKER logo is visible on the top surface.
Зураг: өнцөгтэй view of the Kicker 46KISLOC2 Line-Output Converter, showcasing the compact black housing, the array of input wires, and the dual RCA output ports. The KICKER branding is visible on the top surface.
Үйл ажиллагаа
Once properly installed, the KISLOC2 operates automatically. It senses the audio signal from your factory radio and converts it to a line-level signal for your amplifier. The integrated DC offset detection activates the remote turn-on output.
- Асаах: When your factory radio is turned on, the KISLOC2 will detect the DC offset in the speaker signal and activate its remote turn-on output (blue wire), signaling your amplifier to turn on. A red LED on the unit will illuminate to indicate active DC offset turn-on.
- Аудио гаралт: The converted line-level audio signal will be sent through the RCA outputs to your ampнастан.
- Унтраах: When the factory radio is turned off, the KISLOC2 will cease to detect the DC offset, and the remote turn-on output will deactivate, turning off your ampнастан.
Засвар үйлчилгээ
The Kicker 46KISLOC2 is designed for maintenance-free operation. No user-serviceable parts are inside. To ensure longevity:
- Төхөөрөмжийг цэвэр, тоос шороо, хог хаягдалгүй байлга.
- Бүх холболтууд найдвартай, зэврэлтгүй байгаа эсэхийг шалгаарай.
- Avoid exposing the unit to extreme temperatures or direct sunlight.
Алдааг олж засварлах
If you experience issues with your KISLOC2, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Ampөргөгч асахгүй байна. | No signal from factory radio; faulty remote wire connection; factory radio not compatible with DC offset turn-on. | Ensure factory radio is on and playing audio. Check blue remote wire connection. Verify factory radio's amplifier output impedance is 60Ω or lower. If not, a separate switched 12V source for the amplifier's remote input may be required. |
| No audio output from ampнастан. | Incorrect speaker wire input connections; faulty RCA cables; ampөргөгч тохиргоо буруу байна. | Double-check all input speaker wire connections (polarity). Test RCA cables. Verify amplifier input settings (e.g., input sensitivity, gain). |
| Гажуудсан аудио. | Оролтын дохио хэт өндөр; ampөргөгч хүч хэт өндөр тохируулагдсан. | Reduce the volume level of the factory radio. Adjust the gain settings on your aftermarket ampнастан. |
| Unit gets hot or smokes. | Хэт ачаалал эсвэл богино холболт. | Immediately disconnect power. This indicates a serious issue. Do not re-connect power. Contact Kicker support or a qualified technician. |
Үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загвар | 46KISLOC2 |
| Оролтын сувгууд | 2 (Стерео) |
| Хамгийн их оролтын дохио | 55 Watts (16 Volts) |
| Гаралтын ботьtage | 8 вольт хүртэл |
| Давтамжийн хариу үйлдэл | 20Hz - 20kHz (Flat) |
| Алсын асаалттай гаралт | 100mA, 12V (DC Offset Activated) |
| Хэмжээ (L x W) | 6"L x 5"W (approximate, unit body is compact) |
| Жин | 2.82 унц |
Баталгаат хугацааны мэдээлэл
Kicker products are warranted against defects in material and workmanship for a period of one (1) year from the date of original purchase. Please retain your sales receipt as proof of purchase. This warranty is valid only for the original purchaser and is not transferable.
The warranty does not cover damage due to improper installation, accident, misuse, abuse, negligence, normal wear and tear, or unauthorized modification. For full warranty terms and conditions, please refer to the official Kicker website or contact Kicker customer support.
Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting, or warranty inquiries, please contact Kicker customer support:
- Webсайт: www.kicker.com
- Утас: Refer to the Kicker webбүс нутгийн холбоо барих утасны сайт.
- Имэйл: Refer to the Kicker webдэмжлэг үзүүлэх имэйл хаягуудын сайт.
When contacting support, please have your product model number (46KISLOC2) and proof of purchase ready.
