1. Танилцуулга
This user manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell Power X-Change TE-SM 36/210 Li Cordless Miter Saw. As part of the Power X-Change series, this saw offers unparalleled flexibility and freedom from cords, making it ideal for various woodworking tasks, including miter and cross cuts, and even cutting parquet flooring to length.
Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its performance and lifespan.
Figure 1: The Einhell TE-SM 36/210 Li Cordless Miter Saw, a versatile tool for precise cuts.
2. Аюулгүй ажиллагааны заавар
Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury or damage to the tool.
- Хувийн хамгаалах хэрэгсэл (PPE) өмсөх: Үргэлж хамгаалалтын шил, сонсголын хамгаалалт, тоосны маск зүүж байгаарай.
- Аюулгүй ажлын хэсэг: cl-г ашиглана ууamping device to firmly hold the workpiece in place before cutting.
- Ажлын талбайг цэвэр байлгах: Keep the work area free of clutter and well-lit.
- Шалгах ир: Ensure the saw blade is sharp, clean, and correctly installed before each use.
- Хэт хэтрүүлэхээс зайлсхий: Бүх цаг үед зөв хөл, тэнцвэрийг хадгалах.
- Цахилгааныг салгах: Аливаа тохируулга хийх, дагалдах хэрэгслийг солих эсвэл багажийг хадгалахын өмнө зайны багцыг үргэлж салгаж ав.
- Тоосжилтын менежмент: Utilize the dust bag or connect to a dust extractor to minimize airborne dust.
3. Тохиргоо
3.1 Батерей суурилуулах
The TE-SM 36/210 Li operates on the Einhell Power X-Change system, requiring two 18V batteries (36V total) for optimal performance. It is recommended to use at least two 2.5 Ah PXC Plus rechargeable batteries.
- Ensure the saw is switched off.
- Align the battery packs with the battery slots on the saw.
- Slide the battery packs into the slots until they click securely into place.
- Салгахын тулд батерей бүрийн суллах товчийг дарж, гулсуулж гаргана уу.
Figure 2: Proper installation of the Power X-Change batteries into the saw.
3.2 X-Tend Table Extension
The saw features X-Tend supports that can be adjusted with one hand and without tools, providing stable support for wider workpieces.
- Locate the X-Tend supports on either side of the main table.
- Pull the supports outwards to extend them to the desired length.
- Ensure the workpiece is fully supported across the extended table for stability and accurate cuts.
Figure 3: Extending the X-Tend table for supporting longer workpieces.
3.3 Тоос цуглуулах
The saw comes with a sawdust bag and an adapter for connecting an external dust extractor, helping to keep your workspace clean.
- Attach the provided sawdust bag to the dust port at the rear of the saw.
- For more efficient dust extraction, connect a compatible dust extractor hose to the adapter.
4. Ашиглалтын заавар
4.1 Асаах/унтраах
To start the saw, press the main power switch. Release the switch to turn off the saw.
4.2 Using LED Light and Laser Line
The integrated LED light and laser line ensure precise cuts, even in challenging lighting conditions.
- Locate the LED and Laser switches on the saw's handle.
- Press the respective buttons to activate the LED light for illumination and the laser line for guiding your cut.
Figure 4: The laser line provides a clear guide for accurate cutting.
4.3 Adjusting Angle Cuts (Miter)
The turntable allows for precise angle adjustments for miter cuts, ranging from -47° to +47°.
- Loosen the locking mechanism for the turntable.
- Rotate the turntable to the desired angle, indicated by the scale.
- Securely tighten the locking mechanism before making a cut.
Figure 5: The turntable allows for precise angle adjustments for miter cuts.
4.4 Adjusting Bevel Cuts
The saw head can be tilted up to 45° to the left for bevel cuts.
- Loosen the bevel adjustment knob.
- Хөрөөний толгойг хүссэн өнцгөөр нь хазайлгана.
- Tighten the knob to lock the head in position.
4.5 Sliding Function
The smooth-running drag function is suitable for wider workpieces, allowing the saw head to slide forward and backward during the cut.
- Ажлын хэсэг найдвартай байгаа эсэхийг шалгаарай clamped.
- Lower the saw blade slightly into the workpiece.
- Push the saw head forward through the material, then pull it back to complete the cut.
4.6 Cutting Capacity
The cutting capacity varies based on the battery capacity and the material being cut. The Power X-Change system allows for different battery sizes to be used, affecting the number of cuts per charge.
Figure 6: Approximate cutting capacity for laminated wood (195 x 8 mm) per battery charge.
Figure 7: Approximate cutting capacity for square wood (60 x 60 mm) per battery charge.
For optimal results, it is recommended to use higher capacity Power X-Change batteries.
4.7 Бүтээгдэхүүний видео
Watch the official product video for a visual guide on the features and operation of the Einhell TE-SM 36/210 Li Cordless Miter Saw.
Video: Demonstrating the features and use of the Einhell TE-SM 36/210 Li Miter Saw, including battery installation, X-Tend table, laser guide, and various cuts.
5. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны хөрөөний урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: After each use, clean the saw thoroughly, especially around the blade area and dust port, to prevent sawdust buildup. Use a brush or compressed air.
- Ир солих: Replace worn or damaged saw blades promptly. Always use a blade compatible with the saw's specifications and intended material. Refer to the blade replacement instructions in the full manual for detailed steps.
- Тосолгоо: Periodically lubricate moving parts as recommended in the comprehensive manual to ensure smooth operation of the sliding mechanism and angle adjustments.
- Хадгалах: Хөрөөг хуурай, аюулгүй газар, хүүхдэд хүрэхгүй газар хадгална.
6. Алдаа засах
Энэ хэсэгт таны хөрөөтэй холбоотой нийтлэг асуудлуудыг авч үзнэ.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөрөө эхлэхгүй байна. | Batteries not installed correctly or discharged. | Батерейг бүрэн цэнэглэж, зөв оруулсан эсэхийг шалгаарай. |
| Cuts are not straight or precise. | Dull blade, incorrect angle setting, or workpiece not secure. | Replace blade, re-check angle settings, and ensure workpiece is clampхатуу ed. |
| Excessive dust during operation. | Dust bag full or not properly attached; dust extractor not connected or clogged. | Empty dust bag, check connections, or clear any blockages in the dust extraction system. |
| Saw motor overheats. | Overloading the saw, continuous heavy use. | Allow the saw to cool down. Avoid forcing the blade through material. |
If you encounter issues not listed here, please refer to the complete product manual or contact Einhell customer support.
7. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | TE-SM 36/210 Li (4300880) |
| Ботьtage | 36 Volts (2x 18V Power X-Change) |
| Хүч | 144 ватт |
| Хурд | 1900 эрг / мин |
| Хутганы урт | 30 сантиметр |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 78.2 x 53 x 49 см |
| Жин | 12.57 кг |
| Онцлог шинж чанарууд | Brushless motor, LED light, Laser line, X-Tend table supports |
| Бүрэлдэхүүн хэсгүүдийг багтаасан | Cordless sliding miter saw, precision carbide-tipped saw blade |
| Батерей шаардлагатай | Yes (2x 18V Power X-Change, not included for main power; 2x LR44 for laser/LED) |
| Хутганы материал | Карбид |
| Санал болгож буй гадаргуу | Мод |
8. Баталгаат хугацаа ба дэмжлэг
For warranty information, please refer to the documentation provided with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly.
Spare parts availability: Information unavailable.
You can find more information and contact details on the official Einhell webсайт: www.einhell.com
