1. Аюулгүй байдлын мэдээлэл
Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.
- Төхөөрөмжийг хэт өндөр температур эсвэл нарны шууд тусгалд бүү тавь.
- Төхөөрөмжийг ус, өндөр чийгшилээс хол байлга.
- Төхөөрөмжийг задлах эсвэл өөрчлөх гэж бүү оролдоорой. Энэ нь баталгааг хүчингүй болгож, аюулгүй байдлын эрсдэл учруулж болзошгүй.
- Цэнэглэхийн тулд зөвхөн өгсөн цэнэглэгч кабель эсвэл баталгаажуулсан USB-C кабелийг ашиглана уу.
- Ensure the installation surface is clean and dry before attaching the light using adhesive methods.
2. Бүтээгдэхүүн дууссанview
The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.
Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.
Гол онцлогууд:
- Супер тод гэрэлтүүлэг: 200 lumens with 6000K Clean White Glow.
- Утасгүй суурилуулалт: No hard wiring required.
- Хөдөлгөөн мэдрэгч: Automatically turns on when motion is detected in dark or low-light conditions.
- Цэнэглэдэг батерей: Built-in 4500mAh UL certified battery for extended use.
- Олон суурилуулах сонголтууд: Magnetic attachment, 3M adhesive tape, or screws.
- 3-Mode Switch: OFF, ON, and AUTO modes for flexible operation.
Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.
3. Тохиргоо
The BLS T401 offers flexible installation options to suit various surfaces.
Суурилуулалтын аргууд:
- Соронзон хавсралт: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
- Наалдамхай тууз: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
- Шураг бэхэлгээ: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.
4. Ашиглалтын заавар
The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.
Горим сонгох:
- Унтрааж байна: The light remains off regardless of motion or ambient light.
- АСААЛТ: The light stays continuously on.
- АВТО: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.
Хөдөлгөөн мэдрэгчийн тохируулга:
The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.
Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.
5. Цэнэглэх
The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.
Цэнэглэх үйл явц:
- Locate the USB-C charging port on one end of the light.
- Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
- The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
- A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.
6. Засвар үйлчилгээ
To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:
- Цэвэрлэгээ: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- Батерейны арчилгаа: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
- Хадгалах: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
7. Алдаа засах
If you encounter any issues with your BLS T401, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| AUTO горимд гэрэл асахгүй. | Insufficient ambient light (too bright), no motion detected, or low battery. | Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery. |
| Light turns off too quickly or stays on too long. | Motion sensor sensitivity or placement. | Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long. |
| Гэрэл бүдэг эсвэл анивчдаг. | Батерей бага. | Зайгаа бүрэн цэнэглэ. |
| Гэрэл цэнэглэхгүй. | Цэнэглэгч кабель эсвэл тэжээлийн эх үүсвэрийн эвдрэл. | Try a different USB-C cable and/or a different USB power source. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | BLS |
| Загварын дугаар | T401 |
| Гэрлийн эх үүсвэрийн төрөл | LED |
| Гэрэлтүүлэг | 200 люмен |
| Өнгөний температур | 6000 Kelvin (Clean White) |
| Зайны багтаамж | 4500mAh Lithium Ion (UL Certified) |
| Эрчим хүчний эх үүсвэр | Батерейгаар ажилладаг |
| Бүтээгдэхүүний хэмжээс | 15.1"L x 0.9"W x 0.98"H |
| Зүйлийн жин | 8 унц |
| Материал | Акрилонитрил бутадиен стирол, хөнгөн цагаан |
| Хяналтын арга | Slide Switch (OFF/ON/AUTO) |
| Хөдөлгөөн мэдрэгчийн хүрээ | Up to 10 feet, 120° detection angle |
| Суурилуулалтын төрөл | Magnetic, Adhesive, Screw Mount |
| Дотор/гадаа ашиглах | Дотор |
9. Баталгаат хугацаа ба дэмжлэг
BLS санал болгож байна One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.
