KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Танилцуулга

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Урд view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Зураг: Урд view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Тохиргоо ба програмчлал

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Програмчлалын алхамууд:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Хяналтын товчийг дарна уу долоон удаа. дээр eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Түгжих button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Хяналтын товчлуурыг суллана уу.
  7. Гал асаах түлхүүрийг асаагаарай OFF байрлуулж, устгана уу.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Видео: Товчхонview of KeylessOption Key Fob Remotes for Viper systems.

Ашиглалтын заавар

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

Өнцөгтэй view of the KeylessOption Key Fob, showing the side profile болон товчлуурын зохион байгуулалт.

Зураг: өнцөгтэй view of the KeylessOption Key Fob, highlighting its ergonomic design.

Засвар үйлчилгээ

Зай солих:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casinжижиг хавтгай толгойтой халив эсвэл сийлэх хэрэгсэл ашиглана уу.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Snap the remote casing найдвартай буцаж хамт.
Буцах view of the KeylessOption Key Fob, showing the smooth casing.

Зураг: Буцах view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Алдааг олж засварлах

Үзүүлэлтүүд

БрэндТүлхүүргүй сонголт
Загварын дугаарEZSDEI7141 474V
Тохиромжтой төхөөрөмжүүдViper Aftermarket Alarm System
FCC IDEZSDEI7141
Товчлуурын тоо4 (Lock, Unlock, Aux, Panic)
Зүйлийн жин0.634 унц
Багцын хэмжээ6.77 x 4.65 x 0.47 инч

Баталгаат болон дэмжлэг

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webсайт.

KeylessOption Warranty Card

Image: KeylessOption Warranty Card, included with each purchase.

Холбогдох баримт бичиг - EZSDEI7141 474V

Урьдчилсанview Directed 474T 1-Way 4-Button Remote Control
Replacement 1-Way 4-Button Remote Control for Directed systems and compatible Avital, Clifford, and other brands. Features include CR2032 battery, 434Mhz frequency, and 1/4-mile range.
Урьдчилсанview Remote Control Compatibility and Replacement Guide
A comprehensive reference guide detailing remote control models, part numbers, date codes, and compatible replacement remotes across various brands including Automate, Clifford, Viper, and many others. Includes a section for FCC ID cross-referencing.