ANSMANN FL1600R 20W

ANSMANN FL1600R 20W Cordless LED Work Light

Зааварчилгааны гарын авлага

1. Танилцуулга

Thank you for choosing the ANSMANN FL1600R 20W Cordless LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.

The ANSMANN FL1600R is designed for various craft activities, offering a balance of performance and mobility. Its compact design, battery operation, and high light output ensure comfortable and efficient work.

2. Аюулгүй ажиллагааны заавар

Бүтээгдэхүүнийг гэмтээх, гэмтээхгүйн тулд дараах аюулгүй байдлын арга хэмжээг үргэлж дагаж мөрдөөрэй.

  • LED гэрлийн эх үүсвэр идэвхтэй байх үед нь нүд рүү нь шууд харж болохгүй, учир нь энэ нь нүдийг гэмтээж болзошгүй.
  • Төхөөрөмжийг хүүхдээс хол байлга.
  • Төхөөрөмжийг нээж, өөрчилж болохгүй. Засварыг зөвхөн мэргэшсэн боловсон хүчин хийх ёстой.
  • Use only the original power supply unit provided with the device for charging.
  • Ensure the work light is placed on a stable surface to prevent it from tipping over.
  • Хэрэв төхөөрөмж нь илт гэмтсэн бол түүнийг ажиллуулж болохгүй.
  • The work light is IP54 rated for protection against dust and splashing water. Do not immerse it in water.
  • Operate the device within the specified temperature range of -20 °C to 50 °C.

3. Багцын агуулга

Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.

  • 1x ANSMANN FL1600R 20W Cordless LED Work Light (approx. 1440 g)
  • 1x Power Supply Unit (12 V/1000 mA – European plug)
  • 1x хэрэглэгчийн гарын авлага

4. Бүтээгдэхүүн дууссанview

The ANSMANN FL1600R features a robust design with a blue frame and a black light housing. It includes an integrated stand for flexible positioning and a handle for portability.

ANSMANN FL1600R 20W Cordless LED Work Light, front view, showing the blue frame and black light housing with LED array.

Зураг 1: Урд view of the ANSMANN FL1600R 20W Cordless LED Work Light, highlighting its blue frame and black LED housing.

5. Тохиргоо

The ANSMANN FL1600R is designed for immediate use. No complex assembly is required.

  1. Савлах: Carefully remove the work light and all accessories from the packaging.
  2. Байршил: Place the work light on a stable, flat surface using its integrated adjustable stand. The stand allows for flexible angling of the light.
  3. Нэмэлт суурилуулалт: The work light features an integrated tripod mount for use with compatible tripods (sold separately). It can also be mounted using a wall-mount bracket (see Figure 2).
Diagram showing various mounting options for the ANSMANN FL1600R 20W Cordless LED Work Light, including a tripod stand (sold separately) and a wall-mount bracket.

Figure 2: Illustration of mounting options, including a tripod stand and wall-mount bracket (accessories sold separately).

6. Ашиглалтын заавар

The work light offers three illumination levels for various needs.

  1. Асаах/унтраах: Locate the power button, typically on the back or side of the light housing. Press once to turn on the light.
  2. Гэрэлтүүлгийг тохируулах: Subsequent presses of the power button will cycle through the brightness levels:
    • 25% тод байдал: Approximately 400 lumens, providing up to 10 hours of illumination.
    • 50% тод байдал: Approximately 800 lumens, providing up to 6 hours of illumination.
    • 100% тод байдал: Approximately 1600 lumens, providing up to 3 hours of illumination.
  3. Унтраах: After cycling through all brightness levels, pressing the button again will turn off the work light.
ANSMANN FL1600R 20W Cordless LED Work Light with icons indicating 20 Watts, 1600 Lumens, Rechargeable battery, and three illumination levels (25%, 50%, 100%).

Figure 3: Icons illustrating the key features: 20W power, 1600 lumens output, rechargeable battery, and three dimming levels.

ANSMANN FL1600R 20W Cordless LED Work Light positioned on a workbench in a workshop setting, alongside tools and blueprints.

Figure 4: The work light in a typical workshop application, demonstrating its portability and utility.

7. Батерейг цэнэглэж байна

The ANSMANN FL1600R is equipped with a rechargeable Lithium-ion battery.

  1. Цэнэглэгчийг холбох: Plug the provided power supply unit into the charging port on the work light. Then, connect the power supply to a suitable wall outlet.
  2. Цэнэглэх үзүүлэлт: The work light typically has an indicator light that shows the charging status. Refer to the specific indicator behavior in the product's quick start guide if available.
  3. Цэнэглэх хугацаа: A full charge for the 32.6 Wh battery takes approximately 4 to 5 hours.
  4. Operation During Charging: Хэрэв лamp is switched on while charging, its brightness will be reduced to 50% to prioritize charging efficiency and prevent overheating.

8. Засвар үйлчилгээ

Proper maintenance ensures the longevity and optimal performance of your work light.

  • Цэвэрлэгээ: Clean the exterior of the work light with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is free of dust and debris.
  • Хадгалах: When not in use for extended periods, store the work light in a cool, dry place. It is recommended to charge the battery every 3-6 months to maintain its health.
  • Батерейны арчилгаа: The integrated Lithium-ion battery is not user-replaceable. Do not attempt to open the battery compartment.

9. Алдаа засах

If you encounter issues with your ANSMANN FL1600R, refer to the following common problems and solutions:

АсуудалБоломжит шалтгаанШийдэл
Гэрэл асдаггүй.Батерей дуусч байна.Өгөгдсөн тэжээлийн хангамжийг ашиглан зайгаа цэнэглэ.
Гэрэл бүдэг эсвэл анивчдаг.Батерейны цэнэг багатай.Зайгаа цэнэглэ.
Цэнэглэж эхлэхгүй байна.Power supply not properly connected or faulty.Ensure the power supply is securely connected to both the light and the wall outlet. Try a different outlet. Verify the power supply is not damaged.
Brightness reduced during charging.Хэвийн ажиллагаа.This is an intended feature to protect the battery and charging circuit. Full brightness resumes once charging is complete and the charger is disconnected.

If the problem persists after attempting these solutions, please contact ANSMANN customer support.

10. Техникийн үзүүлэлтүүд

ОнцлогТодорхойлолт
Загварын дугаар1600-0275
БрэндANSMANN
Хүч20 ватт
Гэрлийн урсгал1600 люмен (хамгийн ихдээ)
Гэрэлтүүлгийн түвшин25% (400 lm, 10h), 50% (800 lm, 6h), 100% (1600 lm, 3h)
Өнгөний температур5000 Келвин (Өдрийн цагаан)
Өнгө дүрслэх индекс (CRI)> 80
Зайны төрөл4x Lithium-ion (included), 32.6 Wh
Цэнэглэх хугацаа4-5 цаг
Оролтын хэмжээtage12 Volts (via power supply)
Хамгаалалтын үнэлгээIP54 (Тоос шороо болон ус цацрахаас хамгаалагдсан)
Ашиглалтын температур-20 хэмээс 50 хэм хүртэл
Хэмжээ (L x W x H)8.5 x 28.5 x 27.5 см
Жин1.48 кг (1485 гр)
МатериалМеталл
Дундаж наслалт50,000 цаг
Эрчим хүчний шошгоF (as per EU Energy Label)
ANSMANN FL1600R 20W Cordless LED Work Light in a construction environment, illustrating its daylight white light (5000K), high color rendering (CRI > 80), temperature resistance (-20°C to 50°C), and IP54 rain protection.

Figure 5: Key features of the work light, including 5000K daylight white, CRI > 80, temperature resistance, and IP54 rating.

EU Energy Label for ELECTRO DH 81.139/5/DIA, showing an energy efficiency class of F.

Figure 6: EU Energy Label for the product, indicating an energy efficiency class of F. For more details, refer to the EPREL мэдээллийн сан.

11. Баталгаат хугацаа ба дэмжлэг

ANSMANN provides a Үйлдвэрлэгчийн 10 жилийн баталгаат хугацаа for this product, excluding the battery. The battery is subject to standard warranty terms for rechargeable batteries.

For warranty claims, technical support, or spare parts availability, please contact your retailer or ANSMANN customer service directly. Availability of spare parts is guaranteed for 1 year.

Дэмжлэг үзүүлэх үйлчилгээтэй холбогдохдоо загварын дугаар (1600-0275) болон худалдан авалтын баримтаа бэлэн байлгана уу.

12. Байгаль орчны мэдээлэл

Do not dispose of the device or its battery with household waste. Electronic devices and batteries must be collected separately and recycled in an environmentally sound manner. Please use the return and collection systems available in your country for disposal.