AMX NX-3200 NetLinx NX Integrated Controller User Manual

1. Танилцуулга

The AMX NX-3200 NetLinx NX Integrated Controller is designed for advanced control and automation in various environments, including large lecture halls, boardrooms, media rooms, and integrated homes. It offers robust security features, such as NX Master Security firmware and Dual NIC, to ensure secure communication over computer networks, meeting IT industry security standards. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your NX-3200 controller.

Figure 1: AMX NX-3200 NetLinx NX Integrated Controller, showing the rear panel and side view.

2. Аюулгүй байдлын мэдээлэл

Before operating the AMX NX-3200, read and understand all safety instructions. Retain this manual for future reference.

• Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийг агааржуулалт сайтай газар суурилуулсан эсэхийг шалгаарай.
• Only use the power supply provided or specified by AMX.
• Төхөөрөмжийг чийг, бороо, хэт өндөр температурт бүү тавь.
• Төхөөрөмж дээр хүнд зүйл байрлуулахаас зайлсхий.
• Бүх засвар үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад даатга. Төхөөрөмжийг өөрөө онгойлгох эсвэл засах гэж бүү оролд.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• AMX NX-3200 NetLinx NX Integrated Controller
• Цахилгаан хангамж (12VDC)
• Холбох төхөөрөмж (хэрэв байгаа бол)
• Documentation (this manual, quick start guide)

4. Бүтээгдэхүүн дууссанview

4.1 Урд самбар

Figure 2: Front Panel of the AMX NX-3200.

The front panel of the NX-3200 provides status indicators and a TO PC port for direct connection. Key components include:

• TO PC (USB) Port: For direct connection to a computer for initial configuration and firmware updates.
• LINK/ACT LED: Indicates network link status and activity.
• БАЙДАЛ LED: Displays the operational status of the controller.
• OUTPUT LED: Indicates output activity.
• ОРОЛТ LED: Indicates input activity.
• ICS LAN LED: Status indicator for the ICS LAN connection.
• SERIAL (TX/RX) LEDs: Indicators for transmit and receive activity on serial ports 1-8.
• RELAYS LEDs: Status indicators for relay outputs 1-8.
• IR/SERIAL LEDs: Indicators for IR/Serial ports 1-8.
• I/O LEDs: Status indicators for I/O ports 1-8.

4.2 Арын самбар

Figure 3: Rear Panel of the AMX NX-3200.

The rear panel provides all necessary connections for integrating the NX-3200 into your system. These include:

• RS-232 Ports (1-8): For serial communication with various devices.
• RS-232/422/485 Ports (1-8): Configurable serial ports for flexible communication.
• Relay Ports (1-8): For controlling external devices requiring contact closure.
• I/O Ports (1-8): General purpose input/output ports.
• IR/Serial Ports (1-8): For infrared control or additional serial communication.
• ICS LAN Port: Сүлжээний холболт болон удирдлагын зориулалттай Ethernet порт.
• LAN 10/100 Port: Additional Ethernet port for network connectivity, supporting Dual NIC functionality.
• USB Ports (Type A and B): For connecting USB devices or for direct PC connection.
• PWR (12VDC) Input: Эрчим хүчний оролтын холбогч.
• CONFIG Button: For system configuration and reset functions.

5. Тохиргоо

5.1 Хянагчийг суурилуулах

The NX-3200 is designed for rack mounting or placement on a flat surface. Ensure adequate ventilation around the unit.

• For rack mounting, secure the controller using appropriate rack ears and screws (sold separately or included in package).
• When placing on a surface, ensure it is stable and free from obstructions to airflow.

5.2 Цахилгааныг холбох

1. Connect the provided 12VDC power supply to the PWR input on the rear panel.
2. Цахилгаан тэжээлийг тохирох залгуурт залгаарай.
3. The controller will power on automatically. Observe the STATUS LED on the front panel.

5.3 Сүлжээний холболтууд

The NX-3200 features Dual NIC for enhanced network security and flexibility.

• ICS LAN: Connect an Ethernet cable from your network switch or router to the ICS LAN port for control network communication.
• LAN 10/100: Connect an Ethernet cable to the LAN 10/100 port for a secondary network connection, if required for specific applications or network segmentation.

5.4 Connecting Control Devices

Connect your AV equipment, HVAC systems, lighting, and other devices to the appropriate ports on the rear panel.

• Serial Devices: Use RS-232, RS-422, or RS-485 ports as needed. Refer to the device's documentation for wiring requirements.
• Relay Devices: Connect devices requiring contact closure to the Relay ports.
• I/O Devices: Connect sensors or other input/output devices to the I/O ports.
• IR ялгаруулагч: Connect IR emitters to the IR/Serial ports for controlling IR-controlled equipment.

5.5 Анхны тохиргоо

Initial configuration is typically performed using AMX programming software via the TO PC USB port or over the network.

1. Connect a computer to the TO PC USB port on the front panel using a standard USB cable.
2. Install the necessary AMX software (e.g., NetLinx Studio) on your computer.
3. Follow the software instructions to discover the controller and upload your control program.
4. Alternatively, if the controller has a default IP address or is configured for DHCP, it can be accessed over the network.

6. Хянагчийг ажиллуулах

6.1 LED үзүүлэлтүүдийг ойлгох

The front panel LEDs provide visual feedback on the controller's status and activity:

• БАЙДАЛ LED:
  • Тод ногоон: Хэвийн ажиллагаа.
  • Ногоон анивчих: Booting up or performing a task.
  • Тод улаан: Error or fault condition.
• LINK/ACT LED:
  • Тод ногоон: Network link established.
  • Ногоон анивчих: Сүлжээний үйл ажиллагаа.
• Other TX/RX, RELAYS, IR/SERIAL, and I/O LEDs illuminate to indicate data transmission, reception, or active states on their respective ports.

6.2 Үндсэн үйл ажиллагаа

Once configured and programmed, the NX-3200 operates autonomously based on the loaded control program. User interaction typically occurs through connected control interfaces (e.g., touch panels, keypads, web interfaces) that communicate with the controller.

• Ensure all controlled devices are powered on and connected correctly.
• Use your programmed control interface to send commands to the NX-3200, which then executes the corresponding actions (e.g., turning on a projector, adjusting volume, closing blinds).

6.3 Secure Communication

The NX-3200 supports NX Master Security firmware for secure communication. Ensure your network infrastructure and programming leverage these features for enhanced data protection, especially in enterprise and government environments.

7. Засвар үйлчилгээ

7.1 Цэвэрлэгээ

• Цэвэрлэхийн өмнө цахилгааныг салга.
• Төхөөрөмжийн гадна талыг зөөлөн, хуурай даавуугаар арчина.
• Шингэн цэвэрлэгч эсвэл аэрозоль шүршигч хэрэглэж болохгүй, учир нь тэдгээр нь төхөөрөмжийг гэмтээж болзошгүй.
• Ensure ventilation openings remain clear of dust and debris.

7.2 Програм хангамжийн шинэчлэлтүүд

Periodically check the AMX website for firmware updates. Keeping your controller's firmware up-to-date ensures optimal performance, security, and access to new features.

1. Download the latest firmware from the official AMX support portal.
2. Follow the instructions provided with the firmware update package for installation, typically using AMX programming software.

8. Алдаа засах

If you encounter issues with your NX-3200, refer to the following common problems and solutions:

8.1 Үйлдвэрийн тохиргоонд дахин оруулах

A factory reset will erase all custom configurations and programming, restoring the controller to its default settings. Use this as a last resort.

1. Disconnect power from the NX-3200.
2. -г удаан дар ТОХИРУУЛГА арын самбар дээрх товчлуур.
3. While holding the CONFIG button, reconnect power.
4. Continue holding the CONFIG button until the STATUS LED changes color or flashes in a specific pattern (refer to AMX documentation for exact sequence), then release.
5. The controller will reboot with factory default settings.

9. Техникийн үзүүлэлтүүд

Technical specifications for the AMX NX-3200 NetLinx NX Integrated Controller:

10. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the official AMX website or contact your authorized AMX dealer.

• AMX Official Webсайт: www.amx.com
• Техникийн дэмжлэг: Contact information can be found on the AMX webсайтын дэмжлэгийн хэсэг.
• Дэмжлэг үзүүлэх үйлчилгээтэй холбогдохдоо худалдан авалтын баримт болон бүтээгдэхүүний серийн дугаараа гартаа байлгаарай.