1. Танилцуулга
This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Scheppach HC26 Compressor Air Compressor. Please read this manual thoroughly before operating the device to ensure proper use and to prevent injury or damage.
Figure 1: Scheppach HC26 Compressor Air Compressor. This image shows the main unit with its 24-liter tank, motor housing, pressure gauges, and wheels, alongside a small container, likely for compressor oil.
2. Аюулгүй ажиллагааны заавар
Гал түймэр, цахилгаанд цохиулах, гэмтэх эрсдэлийг бууруулахын тулд цахилгаан хэрэгсэл ашиглахдаа аюулгүй байдлын үндсэн арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Бүх зааврыг уншина уу: Компрессорын удирдлага болон зөв хэрэглээтэй танилцаарай.
- Цахилгааны аюулгүй байдал: Ensure the power supply matches the specifications (230V). Do not operate in wet conditions.
- Хувийн хамгаалах хэрэгсэл (PPE): Always wear safety glasses or goggles. Hearing protection is recommended during extended use.
- Даралтын аюулгүй байдал: Never exceed the maximum working pressure of 8 bar. Do not direct compressed air at people or animals.
- Засвар үйлчилгээ: Disconnect from power before performing any maintenance or adjustments.
- Агааржуулалт: Хэт халалтаас сэргийлэхийн тулд компрессорыг агааржуулалт сайтай газар ажиллуул.
- Тогтвортой байдал: Ensure the compressor is on a stable, level surface during operation.
3. Бүтээгдэхүүн дууссанview
3.1 Гол онцлогууд
- Max. Working pressure: 8 bar
- Kettle size: 24 L
- Oil-lubricated piston compressor for durability and long-lasting performance.
- Quick connection coupling for fast and easy tool changes.
- Driving device (wheels) and ergonomic handle for easy transport.
- Motor Power: 1500 W (2.0 HP)
- Suction Power: 220 L/min
3.2 Бүрэлдэхүүн хэсэг
The Scheppach HC26 compressor includes the main compressor unit with a 24L tank, motor, pressure gauges, pressure regulator, quick coupling, wheels, and a transport handle.
Figure 2: Pressure Gauge and Quick Coupling. This close-up shows the pressure gauge indicating tank pressure and the quick connection coupling for attaching pneumatic tools.
4. Тохиргоо
- Савлах: Компрессор болон бүх дагалдах хэрэгслийг савлагаанаас болгоомжтой авч хаяна уу. Тээвэрлэлтийн эвдрэл гарсан эсэхийг шалгана уу.
- Дугуйны угсралт: Attach the wheels to the designated axles on the compressor base. Secure them firmly according to the included hardware.
- Газрын тос дүүргэх: As an oil-lubricated compressor, ensure the crankcase is filled with the appropriate compressor oil to the correct level before first use. Refer to the oil level indicator.
- Байршил: Position the compressor on a firm, level surface in a well-ventilated area, away from walls or obstructions to allow for proper airflow.
- Цахилгааны холболт: Connect the compressor to a grounded 230V, 50Hz power outlet.
5. Ашиглалтын заавар
- Анхны эхлэл: After setup, turn on the compressor. It will begin to build pressure in the tank. The motor will automatically shut off once the maximum pressure (8 bar) is reached.
- Гаралтын даралтыг тохируулах: Use the pressure regulator knob to set the desired output pressure for your pneumatic tool. Monitor the regulated pressure gauge.
- Холбох хэрэгслүүд: Attach your pneumatic tool to the quick connection coupling. Ensure a secure connection.
- Үйл ажиллагаа: Begin using your tool. The compressor motor will cycle on and off automatically to maintain tank pressure as air is consumed.
- Унтрааж байна: When finished, turn off the compressor. Disconnect the tool and then unplug the compressor from the power outlet.
- Конденсатыг зайлуулах: After each use, or at least daily, drain any accumulated moisture from the tank using the drain valve located at the bottom of the tank. This prevents rust and extends tank life.
5.1 Нийтлэг хэрэглээний програмууд
- Дугуйны инфляци: Ideal for inflating vehicle tires, bicycle tires, and sports equipment.
- Nailing/Stapling: Powers pneumatic nailers and staplers for various woodworking and construction tasks.
- Шүршигч будах: Suitable for use with spray guns for painting projects.
- үлээх/цэвэрлэх: Effective for blowing dust and debris from workspaces, tools, and machinery.
- Pneumatic Ratchets: Can power small pneumatic ratchets for mechanical work.
Зураг 3: Хэрэглээний жишээamples. This diagram visually represents common uses for the air compressor, including powering nail guns, pneumatic ratchets, spray guns, and for tire inflation and general blowing tasks.
Figure 4: Mobile Use. A user is shown inflating a car tire, demonstrating the compressor's suitability for mobile applications thanks to its wheels and handle.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны агаарын компрессорын удаан эдэлгээ, оновчтой ажиллагааг хангана. Ямар нэгэн засвар үйлчилгээ хийхээсээ өмнө үргэлж цахилгааныг салга.
- Ус зайлуулах конденсат: Daily or after each use, open the drain valve at the bottom of the tank to release accumulated moisture.
- Газрын тосны түвшинг шалгах: Regularly check the oil level in the crankcase. Refill or change oil as needed, using only recommended compressor oil.
- Цэвэр агаарын шүүлтүүр: Inspect and clean the air filter regularly. A clogged filter reduces efficiency and can damage the motor. Replace if necessary.
- Ерөнхий цэвэрлэгээ: Keep the compressor clean and free of dust and debris. Wipe down exterior surfaces.
- Хоолой болон холбох хэрэгслийг шалгах: Periodically check all hoses and fittings for leaks, cracks, or damage. Replace any worn parts.
Figure 5: Portability and Maintenance. This graphic highlights the compressor's ease of transport and its design for straightforward maintenance.
7. Алдаа засах
Хэрэглэгчийн дэмжлэгтэй холбогдохоосоо өмнө нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийн талаар дараах хүснэгтийг үзнэ үү.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Компрессор асахгүй байна. | Цахилгаангүй, автомат таслуур тасарсан, унтраалга эвдэрсэн. | Check power connection, reset breaker, contact service if switch is faulty. |
| Компрессор байнга эсвэл байнга ажилладаг. | Air leak in system, check valve issue, excessive air demand. | Check hoses and fittings for leaks, inspect check valve, reduce air consumption. |
| Агаарын даралт бага. | Clogged air filter, air leak, pressure regulator set too low. | Clean/replace air filter, check for leaks, adjust pressure regulator. |
| Хэт их чимээ шуугиан эсвэл чичиргээ. | Loose components, worn parts, insufficient oil. | Tighten fasteners, inspect for worn parts, check and add oil if needed. |
8. Техникийн үзүүлэлтүүд
| Тодорхойлолт | Үнэ цэнэ |
|---|---|
| Загварын нэр | HC26 (5906135901) |
| Брэнд | Шеппах |
| Ботьtage | 230 вольт |
| Мотор морины хүч | 1500 Вт (2.0 морины хүчтэй) |
| Макс. Ажлын даралт | 8 бар |
| Танкны багтаамж | 24 литр |
| Air Flow Capacity (Suction) | 220 LPM |
| Зүйлийн жин | 1 килограмм (ойролцоогоор 2.2 фунт) |
| Бүтээгдэхүүний хэмжээс | 0.04"L x 0.04"W x 0.04"H (Note: These dimensions appear to be placeholder values and may not reflect the actual size of the compressor.) |
| Онцлог шинж чанар | Durable, Oil-lubricated piston compressor |
Figure 6: Key Specifications. This infographic highlights the maximum 8 bar working pressure, 220 L/min suction power, and 24 L tank volume. Please note the discrepancy regarding 'Oil-free' in the image versus 'Oil Lubricated' in the product description; the product is confirmed to be oil-lubricated.
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or to order replacement parts, please contact Scheppach customer service. Retain your proof of purchase for warranty claims.
Хамгийн сүүлийн үеийн холбоо барих мэдээллийг авахыг хүсвэл албан ёсны Scheppach хаягаар зочилно уу. webсайт эсвэл худалдан авалтад орсон баримт бичигт хандана уу.
