TICCI T8VB Vibrating Alarm Watch User Manual

Танилцуулга

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

Аюулгүй байдлын мэдээлэл

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Цагийг онгойлгох гэж бүү оролдооройasing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

Бүтээгдэхүүн дууссанview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

Зураг 1: Урд view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

Товч А: Mode Selection / Backlight
Б товчлуур: Set / Adjust Up
C товчлуур: Adjust Down / Start/Stop (Stopwatch/Countdown)
D товчлуур: Түгжих/тайлах

Тохиргоо

1. Initial Power On / Battery

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. Цаг, огноог тохируулах

1. From the Time Mode display, press and hold Б товчлуур for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. дарна уу А товч to cycle through the settings: Hour → Minute → Year → Month → Date.
3. Ашиглах Б товчлуур to increase the flashing value and C товчлуур багасгахын тулд.
4. Once all settings are adjusted, press Б товчлуур Тохиргооны горимоос гарахын тулд дахин дарна уу.
5. To switch between 12-hour and 24-hour format, press C товчлуур while the hour digits are flashing during time setting.

Ашиглалтын заавар

1. Горим сонгох

дарна уу А товч repeatedly to cycle through the different modes:

• Цагийн горим: Долоо хоногийн одоогийн цаг, огноо, өдрийг харуулна.
• Сэрүүлгийн горим: Allows setting and managing up to 8 individual alarms.
• Секундомер горим: Үйл явдлын цаг хугацааны хувьд.
• Тооцоолох горим: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. Оруулна уу Сэрүүлгийн горим дарснаар А товч until "AL" appears on the display.
2. Дарж удаан дарна уу Б товчлуур for approximately 2 seconds until the alarm number (1-8) flashes.
3. Ашиглах А товч to select the alarm you wish to set (A1, A2, A3, etc.).
4. дарна уу Б товчлуур to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. Ашиглах Б товчлуур to adjust the hour and C товчлуур минут тохируулах.
6. Цагийг тохируулсны дараа дарна уу А товч to select the alarm type:
   • ХОЁЛ: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. дарна уу Б товчлуур to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use А товч to select the alarm, then press C товчлуур to toggle its status.

3. Цаг тоолуур

The countdown timer can be set from 15 minutes up to 24 hours.

1. Оруулна уу Тоолох горим дарснаар А товч until "TR" appears on the display.
2. Дарж удаан дарна уу Б товчлуур for approximately 2 seconds until the hour digits flash.
3. Ашиглах Б товчлуур to adjust the hour and C товчлуур to adjust the minute for the countdown duration.
4. дарна уу Б товчлуур to save the countdown setting.
5. дарна уу C товчлуур тооллыг эхлүүлэх эсвэл түр зогсоохын тулд.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. Секундомер

1. Оруулна уу Секундомер горим дарснаар А товч until "ST" appears on the display.
2. дарна уу C товчлуур секундомер эхлүүлэх.
3. дарна уу C товчлуур Секундомерыг түр зогсоохын тулд дахин дарна уу.
4. Түр зогсоох үед дарна уу Б товчлуур секунд хэмжигчийг тэг болгох.

5. Арын гэрэлтүүлэг

дарна уу А товч briefly in any mode to activate the super bright EL backlight for easy viewгэрэл багатай нөхцөлд.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• руу Түгжих the watch: Press and hold Б товчлуур болон C товчлуур simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• руу Түгжээг тайлах the watch: Press and hold Б товчлуур болон C товчлуур simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

Засвар үйлчилгээ

1. Усны эсэргүүцэл

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is зөвлөдөггүй for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. Цэвэрлэгээ

Clean the watch and strap regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the finish or seals.

3. Зай солих

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

Алдааг олж засварлах

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• Товчнууд хариу өгөхгүй байна: The watch may be in lockout mode. Press and hold Б товчлуур болон C товчлуур simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• Цагны доторх ус: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

Үзүүлэлтүүд

Figure 4: Watch dimensions.

Баталгаат болон дэмжлэг

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI webсайт.