1. Аюулгүй байдлын мэдээлэл
Please read all safety instructions carefully before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Эрчим хүчний эх үүсвэр: Use only the provided power adapter. Ensure the power supply voltage нь тухайн бүтээгдэхүүний шаардлагад нийцдэг.
- Ус ба чийг: Do not expose this product to water, moisture, or extreme humidity. Avoid installation in areas where water contact is possible.
- Дулаан: Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Агааржуулалт: Ойролцоох агааржуулалтыг сайтар хангах amplifier unit. Do not block any ventilation openings.
- Суурилуулалт: Installation should be performed by qualified personnel following local electrical codes. Ensure all wiring is secure and properly insulated.
- Цэвэрлэгээ: Disconnect power before cleaning. Use a dry cloth only. Do not use liquid cleaners or aerosol cleaners.
- Үйлчилгээ: Энэ бүтээгдэхүүнд өөрөө үйлчлэх гэж бүү оролдоорой. Бүх засвар үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад хандаарай.
2. Бүтээгдэхүүн дууссанview
The Herdio 5.25'' Home Audio Package provides a versatile sound solution for various indoor environments. It includes a wall-mount Bluetooth amplifier receiver and two 5.25-inch in-ceiling passive speakers. The system supports multiple audio input options, including Bluetooth, AUX, and USB, along with a microphone input for paging or announcements.
2.1. Wall Mount Bluetooth Ampамьд хүлээн авагч
Энэ компакт amplifier unit is designed to fit into a standard wall plate, offering convenient access to controls and connectivity. It features a master volume knob, input selection switch, USB port for media playback and device charging, a 3.5mm AUX-in jack, and a 1/4'' MIC-in jack.
Зураг 1: Хананд бэхэлгээ Amplifier Controls. This image displays the front panel of the wall-mount amplifier, detailing the power LED, input selection switch (AUX, BT, MIC), USB port, master volume/power knob, MIC IN jack, and AUX IN jack.
Figure 2: USB Interface. This image shows a USB flash drive inserted into the USB input port on the wall-mount amplifier, illustrating its function for media playback or device charging.
2.2. 5.25-inch In-Ceiling Passive Speakers
The system includes two 5.25-inch passive speakers designed for flush mounting in ceilings or walls. These speakers are engineered to reproduce clear sound with good responsiveness, suitable for various audio applications.
Figure 3: In-Ceiling Speaker Design. This image highlights the speaker's design, emphasizing its powerful bass capabilities and integrated coaxial tweeter for balanced audio output.
3. Хайрцагт юу байна
Агуулгыг сайтар задалж, бүх зүйл байгаа эсэхийг шалгаарай:
- 1x Bluetooth In-Wall Audio Receiver Wall Plate
- 1х 12V тэжээлийн хангамж
- 2x Screws for Wall Plate Installation
- 2x 5.25-inch In-Ceiling Speakers (Model HCS-528)
- 2x Speaker Wires
- 1x User Manual for Ampнастан
- 1x User Manual for Speakers
- 2x Gaskets for Speakers
- 1x Cutout Template for Speakers
Figure 4: Package Contents. This image displays all components included in the Herdio 5.25'' Home Audio Package, laid out for verification.
Video 1: Herdio Home Audio Package Unboxing. This video demonstrates the unboxing process and shows all included components of the Herdio audio package.
4. Тохиргоо
4.1. Хананд бэхлэх AmpLifier Суурилуулалт
- Ханыг бэлтгэх: Ensure you have a standard electrical wall box available for installation.
- Цахилгааны кабелийг холбох: Connect the 12V DC power cable (red positive, black negative) to the two-pin connector on the back of the ampамьд модуль.
- Аудио кабелийг холбох: Connect the stereo input audio cable to the three-pin connector on the back of the ampамьд модуль.
- -ийг суурилуулах Ampамь нас: Болгоомжтой оруулна уу amplifier module into the wall box. Secure it using the provided screws.
- Нүүрний хавтанг хавсаргах: Place the decorative faceplate over the amplifier and secure it.
Зураг 5: Хананд бэхэлгээ Amplifier Installation. This image illustrates the process of installing the wall-mount amplifier into a standard electrical box.
Video 2: Herdio Wall Mount Amplifier Installation. This video provides a step-by-step guide on how to install the wall-mount ampөргөх систем.
4.2. Ceiling Speaker Installation
- Determine Location: Choose appropriate locations in the ceiling or wall for the speakers, ensuring no obstructions behind the surface.
- Тайрах нээлт: Use the provided cutout template to mark and cut a circular opening in the ceiling/wall. The cutout diameter is 7.3 inches (18.5 cm).
- Remove Speaker Grille: Gently remove the speaker grille using a small tool or screwdriver.
- Чанга яригч оруулах: Чанга яригчийг зүсэлтийн нүхэнд оруулна уу.
- Аюулгүй чанга яригч: Tighten the speaker clips with screws to firmly secure the speaker in place.
- Replace Grille: Carefully place the speaker grille back onto the speaker.
Figure 6: Installation Dimensions. This diagram provides the total speaker diameter (8.46 inches / 21.5 cm), cutout diameter (7.3 inches / 18.5 cm), speaker depth (4.33 inches / 11 cm), and wall plate dimensions (4.5 inches / 11.43 cm height, 2.75 inches / 6.89 cm width).
Figure 7: Removing Speaker Grille. This image shows how to carefully remove the speaker's protective grille.
Figure 8: Securing Speaker Clips. This image demonstrates tightening the speaker clips with screws to ensure a secure fit in the ceiling or wall.
Figure 9: Replacing Speaker Grille. This image shows the final step of placing the speaker grille back onto the installed speaker.
4.3. Системийн утас холбох
- Connect Speaker Wires to Speakers: Connect the provided speaker wires to the terminals on the back of each speaker. Ensure red wire connects to positive (+) and black wire to negative (-).
- Connect Speaker Wires to Ampамь нас: Connect the other end of the speaker wires to the speaker output terminals on the back of the wall-mount amplifier. Use a screwdriver to loosen the terminal screws, insert the wires (red to SPK+, black to SPK-), and tighten the screws to secure the connection.
- Цахилгаан хангамжийг холбох: Plug the 12V power supply into a standard electrical outlet and connect its DC plug to the 12V DC input jack on the wall-mount ampнастан.
Video 3: Wiring and Bluetooth Pairing. This video demonstrates how to connect the speaker cables to the amplifier and speakers, and then how to pair a Bluetooth device.
5. Ашиглалтын заавар
5.1. Асаах/унтраах, дууны түвшнийг хянах
To power on the system, turn the master volume knob clockwise. You will hear an audible 'drop' sound, and the power LED (PWR) will illuminate. Continue turning the knob clockwise to increase the volume. To power off, turn the knob counter-clockwise until it clicks.
5.2. Оруулах сонголт
Use the input selection switch on the amplifier's front panel to choose between AUX, BT (Bluetooth), or MIC inputs.
5.3. Bluetooth хослол
- Switch the input selector to 'BT'. The Bluetooth LED will flash, indicating it is in pairing mode.
- Мобайл төхөөрөмж дээрээ (ухаалаг утас, таблет гэх мэт) Bluetooth-ийг идэвхжүүлж, боломжтой төхөөрөмжүүдийг хайж олоорой.
- Select 'Herdio' from the list of available devices to pair.
- Once successfully paired, the Bluetooth LED on the amplifier will remain steadily lit.
- You can now play audio from your device through the Herdio speaker system.
5.4. Using USB Input
Insert a USB flash drive into the USB INPUT port for media playback. The ampөргөгч нь аудиог автоматаар илрүүлж, тоглуулна files. This port also functions as a charging port for compatible devices (5V/1A).
5.5. Using AUX-In
Connect an external audio device (e.g., MP3 player, TV) to the 3.5mm AUX IN jack using a stereo audio cable. Switch the input selector to 'AUX' to play audio from the connected device.
5.6. Using MIC-In
Connect a microphone to the 1/4'' MIC IN jack. Switch the input selector to 'MIC' for microphone input. This feature is suitable for paging or making announcements.
6. Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Herdio audio system, follow these maintenance guidelines:
- Цэвэрлэгээ: Цэвэрлэхийн тулд зөөлөн, хуурай даавуу ашиглана уу amplifier faceplate and speaker grilles. Avoid abrasive cleaners, solvents, or harsh chemicals.
- Тоос арилгах: Regularly dust the speaker grilles to prevent accumulation that could affect sound quality.
- Байгаль орчны нөхцөл: Keep the system in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
- Утасны үзлэг: Periodically check all wiring connections for tightness and signs of wear. Loose connections can lead to poor sound quality or intermittent operation.
7. Алдаа засах
If you encounter issues with your Herdio audio system, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Чанга яригчаас дуу гарахгүй |
|
|
| Bluetooth холбогдоогүй байна |
|
|
| Гажуудсан дуу чимээ |
|
|
| USB тоглуулах ажиллахгүй байна |
|
|
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын нэр | HCS 528-16BT |
| Суурилуулах төрөл | Ceiling Mount (Speakers), Wall Mount (Ampилүү амьд) |
| Чанга яригчийн төрөл | Surround Sound, 2-Way In-Ceiling Passive Speakers |
| Чанга яригчийн хэмжээ | 5.25 инч (Вуфер), 1 инч (Твиттер) |
| Чанга яригчийн хамгийн их гаралтын чадал | 300 ватт |
| Давтамжийн хариу үйлдэл | 20 кГц |
| Холболтын технологи | Bluetooth |
| Утасгүй холбооны технологи | Bluetooth |
| Bluetooth хүрээ | 30 метр |
| Онцлог шинж чанарууд | AUX Input, USB Input (Media Playback/Charging), MIC Input |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан (12V DC) |
| Product Dimensions (Ampилүү амьд) | 4.5"H x 2.75"W (Wall Plate) |
| Product Dimensions (Speakers) | 8.46"D x 7.3"W x 4.33"H (Total Diameter x Cutout Diameter x Depth) |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Зүйлийн жин | 7.04 pounds (Total Package) |
| Дотор/гадаа ашиглах | Дотор |
9. Баталгаат хугацаа ба дэмжлэг
This Herdio product is covered by a 1 жилийн үйлчилгээний баталгаа худалдан авсан өдрөөс. Энэхүү баталгаа нь ердийн ашиглалтын үеийн үйлдвэрлэлийн согог, гүйцэтгэлийг хамарна.
Баталгаат нь дараахь шалтгааны улмаас учирсан хохирлыг хамрахгүй.
- Буруу суурилуулалт эсвэл ашиглалт.
- Accidents, misuse, abuse, or negligence.
- Зөвшөөрөлгүй засвар, өөрчлөлт.
- Power surges or lightning strikes.
For warranty claims, technical support, or customer service, please contact Herdio customer support through your retailer or visit the official Herdio webхолбоо барих мэдээлэл авах сайт.
