LE Нарны Гадна Хөдөлгөөн Мэдрэгч Гэрэл WL4000 Зааварчилгааны Гарын Авлага

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Зураг 1.1: Дууслааview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. Бүтээгдэхүүний онцлог

• Өргөн гэрэлтүүлгийн өнцөг: Features 3 adjustable heads providing 270° wide lighting coverage.
• Өндөр тод байдал: Delivers 1000 lumens of 6500K daylight illumination.
• Нарны эрчим хүчийг үр ашигтай цэнэглэх: Converts sunlight into electricity, charging during the day for night operation.
• PIR хөдөлгөөн мэдрэгч: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• Автомат ажиллагаа: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• Бат бөх, цаг агаарт тэсвэртэй: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• Хялбар суурилуулалт: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

Image 2.3: Motion sensor detection range and angle.

3. Багцын агуулга

• LE Solar Outdoor Motion Sensor Light (WL4000)
• Суурилуулах тоног төхөөрөмж (эрэг болон ханын зангуу)
• Хэрэглэгчийн гарын авлага

4. Тохиргоо ба суурилуулалт

Follow these steps for proper installation of your solar light:

1. Байршил сонгоно уу: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. L суулгана ууamp Эзэмшигч: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. Гэрлийг идэвхжүүлэх: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. Hang the Light: Carefully hang the solar light unit onto the installed lamp эзэмшигч.
5. Гэрлийн толгойг тохируулах: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Image 4.1: Step-by-step installation process.

Image 4.2: Fixing the lamp эрэг бүхий эзэмшигч.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp эзэмшигч.

5. Ашиглалтын заавар

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• Өдрийн цагаар ажиллах: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• Шөнийн цагаар ажиллах: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• Автомат унтрах: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. Засвар үйлчилгээ

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• Нарны хавтанг цэвэрлэх: Тогтмол зөөлөн арчиж нарны зай хураагуур, damp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
• Саад тотгорыг арилгах: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• Гэмтлийг шалгах: Periodically check the light for any physical damage, loose connections, or signs of wear.
• Цаг агаарын эсэргүүцэл: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. Алдаа засах

If your solar light is not functioning as expected, consider the following common issues and solutions:

• Шөнийн цагаар гэрэл асдаггүй:
  • Цахилгаан унтраалга ON байрлалд байгаа эсэхийг шалгаарай.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• Хөдөлгөөн мэдрэгч илрүүлэхгүй байна:
  • Мэдрэгч саадгүй байгаа эсэхийг шалгаарай.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.