1. Танилцуулга
The ANYCUBIC Wash and Cure 3.0 is an upgraded 2-in-1 wash and cure station designed for resin 3D printer models. It features a larger cleaning capacity, innovative gooseneck lights for uniform curing, a dual-layer design for IPA saving, and quiet, simple operation. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Аюулгүй ажиллагааны заавар
- Always wear protective gloves and eye protection when handling resin or cleaning solutions.
- Ensure adequate ventilation in your workspace to avoid inhaling resin fumes.
- Төхөөрөмжийг хүүхэд, тэжээвэр амьтнаас хол байлга.
- Төхөөрөмжийг нарны шууд тусгал эсвэл өндөр температурт бүү өртөө.
- Use only recommended cleaning solutions (e.g., Isopropyl Alcohol - IPA) and follow their safety guidelines.
- Never operate the curing function without the UV-blocking top cover in place.
- Цэвэрлэх, засвар үйлчилгээ хийхээс өмнө цахилгааныг салга.
3. Хайрцагт юу байна
Upon unboxing your ANYCUBIC Wash and Cure 3.0, please verify that all components are present:
- Wash and Cure Machine Unit
- Washing Bucket (4L capacity)
- Угаалгын сагс
- Rack Bar (4 pcs)
- Curing Table
- Галуун хүзүүний гэрэл
- Hex түлхүүрийн багц
- Хэрэглэгчийн гарын авлага
- Эрчим хүчний адаптер
Зураг 3.1: All components included in the ANYCUBIC Wash and Cure 3.0 package.
4. Тохируулах гарын авлага
- Баглаа задлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
- Байршил: Place the main unit on a stable, level surface in a well-ventilated area.
- Эрчим хүчний холболт: Connect the power adapter to the unit and then to a power outlet.
- Gooseneck Light Installation: Insert the gooseneck light into its designated port on the main unit.
- Washing Bucket Preparation:
- For washing, place the washing basket inside the washing bucket.
- Fill the washing bucket with your chosen cleaning solution (e.g., IPA) up to the appropriate level, ensuring it covers the models to be cleaned.
- Curing Table Preparation: For curing, ensure the curing table is placed on the rotating platform.
Видео 4.1: Албан ёсоор дууслааview of the Wash and Cure 3.0, demonstrating its features and basic setup.
5. Ашиглалтын заавар
5.1. Угаалгын горим
- Prepare Models: Remove printed models from the build plate. For models still on the build plate, use the hanging cleaning mode. For detached models, place them in the washing basket.
- Place Washing Bucket: Position the washing bucket with the models and cleaning solution onto the main unit's platform. Ensure the UV-blocking cover is in place.
- Угаалгын горимыг сонгоно уу: Press the "Wash" button on the control panel.
- Цаг тохируулах: Use the rotary knob to set the desired washing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
- Угааж эхлэх: Press the Start/Stop button to begin the washing cycle. The internal propeller will agitate the cleaning solution.
- Дуусгах: The machine will beep when the cycle is complete. Carefully remove the models and allow them to dry.
Зураг 5.1: Dual cleaning modes for models on a build plate (hanging) or detached (basket).
Видео 5.1: Demonstration of the washing process in the ANYCUBIC Wash and Cure 2.0 machine, which shares similar washing mechanisms with the 3.0 model.
5.2. Хатууруулах горим
- Place Models: After washing and drying, place the models on the curing table.
- Position Curing Table: Place the curing table with models onto the main unit's rotating platform. Ensure the UV-blocking cover is in place.
- Select Cure Mode: Press the "Cure" button on the control panel.
- Цаг тохируулах: Use the rotary knob to set the desired curing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
- Activate Gooseneck Light (Optional): Press the "FlexiCure" button to activate the gooseneck light for targeted curing of complex areas.
- Хатуурч эхлэх: Press the Start/Stop button to begin the curing cycle. The platform will rotate, and UV lights will activate.
- Дуусгах: The machine will beep when the cycle is complete. Remove the fully cured models.
Зураг 5.2: The gooseneck light provides localized strengthening and uniform curing for intricate details on 3D models.
Видео 5.2: A user demonstrating the curing process with the ANYCUBIC Wash and Cure station, highlighting its ease of use.
6. Засвар үйлчилгээ
- Cleaning the Washing Bucket: Regularly clean the washing bucket and basket to prevent resin buildup. Dispose of used cleaning solution responsibly according to local regulations.
- Төхөөрөмжийг цэвэрлэх: Wipe down the exterior of the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- UV Light Maintenance: Keep the UV lights and gooseneck light clean and free of dust or resin residue to ensure optimal curing performance.
- Хадгалах: When not in use, store the unit in a cool, dry place away from direct sunlight.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж асахгүй байна. | Цахилгаан кабель холбогдоогүй; цахилгаан гаралтын асуудал. | Цахилгааны кабелийн холболтыг шалгах; өөр гарцаар оролдоно уу. |
| Washing/Curing cycle does not start. | Top cover not properly closed; mode not selected. | Ensure the UV-blocking cover is securely in place; select desired mode (Wash/Cure). |
| Models are not clean after washing. | Insufficient washing time; dirty cleaning solution; incorrect IPA concentration. | Increase washing time; replace cleaning solution; ensure proper IPA concentration. |
| Models are sticky after curing. | Insufficient curing time; models not dry before curing; UV lights are dirty. | Increase curing time; ensure models are completely dry; clean UV lights. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загвар | Угаах ба эмчлэх 3 |
| Бүтээгдэхүүний хэмжээс | 8.86 x 8.66 x 14.88 инч |
| Зүйлийн жин | 0.01 унц |
| Брэнд | ANYCUBIC |
| Материал | PC+metal |
| Өнгө | Олон өнгийн |
| Maximum Cleaning Volume | 165 x 100 x 180 mm (4L bucket) |
| Хэт ягаан туяа | 10pcs 405nm + Gooseneck Light |
| Хатаах хамгийн дээд хэмжээ | Φ160 x 180 мм |
| Цаг хэмжигч | 1-30 минут тохируулах боломжтой |
Зураг 8.1: Detailed comparison of Wash and Cure 3 and Wash and Cure 3 Plus specifications.
9. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or service inquiries, please refer to the official ANYCUBIC webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
хаягаар зочилж болно ANYCUBIC Official Store илүү олон бүтээгдэхүүн, дэмжлэгийн нөөцийг авах.
