VISION Talking аналог болон дижитал цагны хэрэглэгчийн гарын авлага

Танилцуулга

Thank you for choosing the VISION Talking Analog and Digital Watch. This watch is designed to provide clear time announcements in Spanish, making it ideal for individuals with visual impairments, children, and the elderly. It features both an analog display for traditional time-telling and a digital display for precise readings, along with an alarm function.

Зураг 1: Урд view of the VISION Talking Analog and Digital Watch.

Тохиргоо

1. Савлах, анхны үзлэг

Carefully remove the watch from its packaging. Inspect the watch for any visible damage. The watch comes with a battery pre-installed and is ready for initial setup.

Figure 2: The watch as it appears in its original clear plastic case.

2. Initial Time Setting (Digital)

The digital time needs to be set first. Refer to the 'Operating Instructions' section for detailed steps on setting the digital time using the 'MODE', 'HOUR', and 'MINUTE' buttons.

3. Анхны цагийн тохиргоо (Аналог)

The analog hands are set independently using the crown (small knob) on the side of the watch. Pull out the crown and rotate it to adjust the analog hands to match the digital time. Push the crown back in to secure the setting.

Ашиглалтын заавар

Товчлуурын функцууд

• MODE товчлуур: Used to cycle through different modes (Time, Alarm Setting).
• TALKING Button: Press to hear the current time announced in Spanish.
• ЦАГИЙН Товч: Used to adjust the hour in setting modes.
• МИНУТ товчлуур: Used to adjust the minute in setting modes.
• Титэм: Used to set the analog hands.

Telling Time

• Дуут мэдэгдэл: дээр дарна уу ЯРИА button to hear the current time spoken aloud in Spanish.
• Дижитал дэлгэц: The digital display shows the time in a 12-hour format (AM/PM).
• Аналог дэлгэц: The traditional hands indicate the hour and minute.

Дижитал цагийг тохируулах

1. дээр дарна уу MODE button repeatedly until the digital display shows the time setting mode (often indicated by flashing digits).
2. -г ашиглана уу ЦАГ button to adjust the hour. Pay attention to AM/PM indicators.
3. -г ашиглана уу МИНУТ минутыг тохируулах товч.
4. дээр дарна уу MODE button again to confirm and exit the time setting mode.

Сэрүүлэг тохируулах

1. дээр дарна уу MODE button until the alarm setting mode is displayed (often indicated by an alarm icon or 'AL').
2. -г ашиглана уу ЦАГ Хүссэн сэрүүлгийн цагийг тохируулахын тулд товчийг дарна уу.
3. -г ашиглана уу МИНУТ button to set the desired alarm minutes.
4. дээр дарна уу MODE button to activate the alarm and exit the setting mode.
5. To turn off a sounding alarm, press any button.

Засвар үйлчилгээ

Цэвэрлэгээ

Цагаа цэвэрлэхийн тулд зөөлөн, хуурай даавуугаар зөөлөн арчина. Зөрүүд бохирдсон тохиолдолд бага зэрэг арчина.amp cloth can be used, but ensure no moisture enters the watch. Avoid using harsh chemicals or abrasive materials.

Зай солих

The watch uses a Lithium-metal battery. When the voice announcement becomes faint or the digital display dims, it's time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and function.

Усны эсэргүүцэл

This watch is marked as "WATER RESISTANT." This typically means it can withstand splashes, rain, or brief immersion in water, such as washing hands. It is үгүй suitable for swimming, showering, or diving. Prolonged exposure to water or submersion may cause damage.

Алдааг олж засварлах

• No Voice Announcement:
  • Батерейны түвшинг шалгана уу. Бага бол солино.
  • Ensure the TALKING button is pressed firmly.
• Дижитал дэлгэц хоосон эсвэл бүдэг байна:
  • Battery may be depleted. Replace the battery.
• Цаг хугацаа буруу байна:
  • Re-set the digital time following the instructions in the 'Operating Instructions' section.
  • Ensure the analog hands are synchronized with the digital time by adjusting the crown.
  • Low battery can affect timekeeping accuracy. Consider battery replacement.
• Сэрүүлэг дуугарахгүй байна:
  • Ensure the alarm is set correctly and activated.
  • Батерейны түвшинг шалгана уу.

Үзүүлэлтүүд

Figure 3: Watch face diameter measurement (40 mm).

Figure 4: Watch case thickness measurement (16 mm).

Figure 5: Watch strap width measurement (18 mm).

Зураг 6: Жишээ ньamples of wrist circumference fit (20 cm and 12 cm).

Баталгаат болон дэмжлэг

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.