myTouchSmart 48707 Эргэлддэг Гадна Дижитал Хашааны Гадасны Цаг хэмжигч Зааварчилгааны Гарын Авлага

Танилцуулга

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Аюулгүй байдлын чухал мэдээлэл

• Цахилгаан цочролын эрсдэл: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Зөв газардуулга: Ensure the timer is properly grounded.
• Хэт ачааллын хамгаалалт: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Байршил: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Гаралтын бүрээс: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Утасны менежмент: Route cords to prevent tripping hazards and damage.
• Засвар үйлчилгээ: Засвар, цэвэрлэгээ хийхээс өмнө цахилгааныг салга.

Багцын агуулга

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Зааварчилгааны гарын авлага

Бүтээгдэхүүний онцлог

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Дижитал таймер: Programmable with custom ON/OFF times.
• Гэрэл мэдрэгч: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Цаг агаарт тэсвэртэй: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Хэт ачааллын хамгаалалт: Integrated 15A/1875W circuit breaker for safety.

Тохиргоо

1. Гадас цуглуулах: Attach the stake sections together and then to the timer unit.
2. Байршил: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Анхны цахилгаан холболт: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Цаг хэмжигчийг дахин тохируулах: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the RESET button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Төхөөрөмжүүдийг холбох: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Ашиглалтын заавар

1. Setting Day & Time

1. -г удаан дар ЦАГ товч.
2. Барьж байхдаа ЦАГ, товчийг дарна уу ДОЛОО ХОНОГ button repeatedly until the desired day of the week appears at the top of the display.
3. Үргэлжлүүлэн барина уу ЦАГ, дээр дарна уу ЦАГ button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Одоо хүртэл барьж байна ЦАГ, товчийг дарна уу MIN button repeatedly to set the current minute.
5. -г суллана ЦАГ тохиргоог хадгалах товч.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. дээр дарна уу PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. дээр дарна уу ДОЛОО ХОНОГ button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. дээр дарна уу ЦАГ button to set the desired ON hour.
4. дээр дарна уу MIN button to set the desired ON minute.
5. дээр дарна уу PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Хүссэн бүх програмаа тохируулсны дараа товчийг дарна уу ЦАГ товчийг дарж үндсэн дэлгэц рүү буцна уу.

To clear a program: байхад viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• -г удаан дар ГАРЫН АВЛАГА button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• АВТО АСААЛТ: The timer will remain ON until the next programmed OFF time.
• АВТО УНТрах: The timer will remain OFF until the next programmed ON time.
• ГАРЫН АВЛАГА: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Үүр бүрий хүртэл: The timer will automatically turn ON at dusk and remain ON until dawn.
• Санах тоолуур: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. дээр дарна уу ДОЛОО ХОНОГ болон ЦАГ buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Идэвхгүй болгохын тулд товчийг дарна уу ДОЛОО ХОНОГ болон ЦАГ buttons simultaneously again. "RND" will disappear.

6. Зуны цагийн горим

To adjust the time for Daylight Saving:

1. дээр дарна уу ЦАГ болон MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Засвар үйлчилгээ

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Төхөөрөмжийг зөөлөн, damp даавуу. Хүчтэй химийн бодис, зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.

Алдааг олж засварлах

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.