Танилцуулга
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Аюулгүй ажиллагааны зааварчилгаа
Цахилгаан хэрэгслийн аюулгүй байдлын ерөнхий анхааруулга:
- Ажлын талбайн аюулгүй байдал: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Цахилгааны аюулгүй байдал: Хоолой, радиатор, тавиур, хөргөгч зэрэг газардуулсан эсвэл газардуулсан гадаргуутай бие махбодид хүрэхээс зайлсхий. Хэрэв таны бие газардуулгатай эсвэл газардуулсан бол цахилгаанд цохиулах эрсдэл нэмэгддэг.
- Хувийн аюулгүй байдал: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Цахилгаан хэрэгслийн ашиглалт ба арчилгаа: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Засвар үйлчилгээ: Цахилгаан хэрэгсэл, дагалдах хэрэгслийг засварлах. Хөдөлгөөнт хэсгүүдийн тэгш бус байдал, бэхэлгээ, эд анги эвдэрсэн, цахилгаан хэрэгслийн ажиллагаанд нөлөөлж болзошгүй бусад нөхцөл байдлыг шалгана уу.
Specific Circular Saw Safety Warnings:
- Гараа зүсэх хэсэг болон ирээс хол байлга. Ажлын хэсгийн доор хүрч болохгүй.
- Зүсэлтийн гүнийг тохируулна уу to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Гэмтсэн эсвэл буруу хутга угаагч, боолтыг хэзээ ч бүү ашиглаарай.
Бүтээгдэхүүн дууссанview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Гол бүрэлдэхүүн хэсгүүд:
- Үндсэн бариул: Ergonomic grip for primary control and operation.
- Туслах бариул: Provides additional stability and control during cutting.
- Асаах/унтраах унтраалга: Моторыг идэвхжүүлж, идэвхгүй болгодог.
- Спиндлийн түгжээ: Button used to lock the spindle for safe and easy saw blade changes.
- Ир хамгаалагч: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Гүн тохируулах хөшүүрэг: Mechanism for setting the desired cutting depth.
- Налууг тохируулах хөшүүрэг: Mechanism for setting the desired cutting angle for bevel cuts.
- Хөрөөний ир: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Тоос зайлуулах адаптер: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Тохиргоо
1. Зай суурилуулах
Батерейг суурилуулах эсвэл салгахаасаа өмнө багажийг унтраасан эсэхээ шалгаарай.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- Суллуулахын тулд зайны багц дээрх суллах товчийг дараад гадагш гаргана уу.
2. Хөрөөний ир суурилуулах
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Ирийг эргэлдэхээс сэргийлж ээрүүл түгжих товчийг дараад барина уу.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Гаднах фланц болон хуучин хөрөөний ирийг ав.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Зүсэлтийн гүнийг тохируулах
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Гүн тохируулах хөшүүргийг суллана.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Тохиргоог түгжихийн тулд гүн тохируулах хөшүүргийг чанга чангална уу.
4. Налуу өнцгийг тохируулах
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Налууг тохируулах хөшүүргийг суллана.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Ашиглалтын заавар
1. Эхлэх ба зогсоох
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Зүсэлт хийх
- Ажлын хэсгийг cl-ээр сайтар бэхлээрэйamps to prevent movement during cutting.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Start the saw and allow the blade to reach full speed before engaging the material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Dust Extraction
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Засвар үйлчилгээ
Цэвэрлэгээ
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Ир арчилгаа
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Хадгалах
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөрөө эхлэхгүй байна | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Хэт их чичиргээ | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Poor cut quality (rough edges, splintering) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Үзүүлэлтүүд
- Загвар: Einhell TE-CS 18/165-1 Li-Solo
- Ботьtage: 18 V (Battery Operated)
- Ачаалалгүй хурд: 4,200 мин⁻¹
- Хөрөөний диаметр: 165 мм
- Модны нүхний диаметр: 20 мм
- Max. Cutting Depth (90°): Ойролцоогоор 54 мм
- Max. Cutting Depth (45°): Ойролцоогоор 35 мм
- Барааны жин: 2.72 кг (батерейгүй)
- Хутганы материал: Өндөр хурдны ган
- Шүдний тоо: 24
- Онцлог шинж чанар: Утасгүй ажиллагаа
- Оруулсан бүрэлдэхүүн хэсгүүд: Хөрөөний ир
- Жич: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Баталгаат болон дэмжлэг
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
