1. Танилцуулга
Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.
2. Аюулгүй байдлын мэдээлэл
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.
- 17.6 фунт (8 кг) жингийн багтаамжаас хэтрүүлж болохгүй.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
- Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
- Use all provided hardware and follow the installation steps precisely.
- Суулгах явцад хүүхэд, тэжээвэр амьтдыг хол байлга.
3. Сав баглаа боодлын жагсаалт
Суурилуулалт эхлэхээс өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай.
Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.
Багц нь дараахь зүйлийг агуулсан байх ёстой.
- Хяналтын гарны угсралт (Дээд ба доод гар)
- Desk Pole
- C-Clamp Суурь
- Grommet Base Components
- VESA хавтан
- All necessary screws, washers, and Allen keys
- Зааварчилгааны гарын авлага
4. Тохиргоо ба суурилуулалт
Choose between C-Clamp or Grommet mounting based on your desk type and preference.
Figure 4.1: The monitor mount offers both C-Clamp болон Grommet суурилуулах сонголтууд.
4.1 C-Clamp Суурилуулалт
- C-cl-ийг хавсаргана ууamp base to the desk pole using the provided screws and Allen key.
- Position the assembled clamp and pole on the edge of your desk.
- C-cl-ийг чангалнаamp бэхэлгээг ширээн дээр найдвартай бэхлэх хүртэл шураг. Тогтвортой, ганхахгүй байгаа эсэхийг шалгаарай.
4.2 Grommet Installation
- C-cl-ийг задлахamp by removing the screw and plate.
- Insert the desk pole through the grommet hole in your desk.
- Secure the pole from underneath the desk using the grommet base plate and tightening knob.
4.3 Attaching VESA Plate to Monitor
- Дэлгэцээ зөөлөн, цэвэр гадаргуу дээр доош харуулан болгоомжтой байрлуул.
- Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.
4.4 Attaching Monitor to Arm
- Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
- Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.
4.5 Кабелийн менежмент
Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.
Figure 4.2: Effective cable management keeps your desk organized.
4.6 Суулгах видео гарын авлага
Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).
5. Ажиллагаа ба тохируулга
The MOUNTUP monitor arm offers full motion capabilities for optimal viewая тухтай байдал.
Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.
5.1 Gas Spring Tension Adjustment
Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.
Figure 5.2: Adjusting the gas spring tension for optimal monitor support.
- If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
5.2 Налалтын тохируулга
The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewөнцөг.
- Loosen the tilting bolt on the VESA plate.
- Position the screen to your desired angle.
- Retighten the tilting bolt to fix the angle.
5.3 Swivel and Rotation
The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.
Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.
- Lower Arm Swivel: ±135°
- Upper Arm Swivel: ±180°
- Screen Swivel: ±90°
- Screen Rotation: 360°
5.4 Adjustment Video Guide
Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).
Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны мониторын суурийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: Холбогчийг зөөлөн арчих, damp даавуу. Өнгөлгөөг гэмтээж болзошгүй зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
- Шалгалт: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
- Хийн булаг: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.
7. Алдаа засах
Хэрэв танд ямар нэгэн асуудал тулгарвал дараах нийтлэг асуудал, шийдлүүдийг үзнэ үү.
- Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
- Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
- Уул нь тогтворгүй эсвэл гуйвж байна: C-cl-ийг баталгаажуулна ууamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
- Гараа хөдөлгөхөд бэрхшээлтэй байх: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.
Асуудал арилахгүй байвал хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
8. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | MU0025 |
| Тохиромжтой дэлгэцийн хэмжээ | 17-32 инч |
| Жингийн багтаамж | 4.4 - 17.6 фунт (2 - 8 кг) |
| VESA нийцтэй байдал | 75х75мм, 100х100мм |
| Суурилуулах төрөл | C-Clamp / Grommet Base |
| C-Clamp Ширээний зузаан | 0.39" - 3.15" (10-80мм) |
| Ширээний зузаан | 0.39" - 3.15" (10-80мм) |
| Нүхний диаметр | 0.39" - 2.36" (10-60мм) |
| Материал | Ган, Хөнгөн цагаан, Хуванцар |
| Өнгө | Хар |
| Max Height (from desk) | 22.64" (57.5см) |
| Хамгийн их өргөтгөл | 19.8" (50.3см) |
| Налалтын хүрээ | +90° / -45° |
| Дэлгэц эргүүлэх | ±90° |
| Дэлгэцийн эргэлт | 360° |
9. Баталгаат хугацаа ба дэмжлэг
All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.
