BOYA 2.4G Wireless Microphone Kit for Type-C Devices 1+2 User Manual

Танилцуулга

This manual provides comprehensive instructions for the setup, operation, and maintenance of your BOYA 2.4G Wireless Microphone Kit for Type-C Devices 1+2. The BY-WM4 PRO-K6 is a digital plug-in 2.4GHz wireless system designed for seamless audio recording with Android and other Type-C devices. It is ideal for live streaming, vlogging, podcasting, and various other audio capture needs.

Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгана уу.

• 2 x BY-WM4 PRO Transmitters (TX4 Pro)
• 1 x BY-WM4 PRO RXU Receiver (Type-C connector)
• 2 x Бүх чиглэлт Lavalier микрофон
• Бүтээгдэхүүний савлагаанд заасан бусад дагалдах хэрэгсэл.

Image: Complete BOYA BY-WM4 PRO-K6 Wireless Microphone Kit components.

Бүтээгдэхүүний онцлог

• Digital 2.4GHz Wireless System
• Compatible with Android and other Type-C devices
• Dual-channel receiver for simultaneous use of two transmitters
• Selectable Stereo and Mono modes
• 3.5mm headphone jack on receiver for real-time monitoring
• Plug-and-play operation for immediate use
• Компакт, хөнгөн загвар

Бүрэлдэхүүн хэсгүүдийг тодорхойлох

BY-WM4 PRO Transmitter (TX4 Pro)

Зураг: Урд view of the BY-WM4 PRO Transmitter.

• Эрчим хүчний LED: Цахилгаан тэжээлийн төлөв болон хослолыг заана.
• Микрофоны оролт: 3.5mm jack for lavalier microphone.
• Эрчим хүч солих: Асаах/унтраах удирдлага.
• Зайны тасалгаа: Houses 2 AAA batteries.

Image: BY-WM4 PRO Transmitter with open battery compartment.

The transmitter is powered by two AAA batteries. Ensure correct polarity when inserting batteries. The Power LED will illuminate when the device is on.

BY-WM4 PRO RXU Receiver

Зураг: хажуу тал view of the BY-WM4 PRO RXU Receiver with labeled controls.

• Type-C холбогч: For connecting to Android phones and other compatible devices.
• Дууны түвшин +/- Товчлуурууд: Гаралтын хэмжээг тохируулна.
• Хосуудын товчлуур: Initiates pairing with transmitters.
• M/S Switch: Toggles between Mono (M) and Stereo (S) output modes.
• Чихэвчний залгуур (3.5 мм): Бодит цагийн аудио хяналт хийх зориулалттай.
• Эрчим хүчний LED: Эрчим хүч болон холболтын төлөвийг заана.
• Built-In Internal Antenna: Утасгүй дохио хүлээн авах зориулалттай.

Image: End view of the BY-WM4 PRO RXU Receiver, showing connectivity ports.

The receiver draws power directly from the connected Type-C device. The M/S switch allows you to select the audio output mode. In Mono mode, audio from both transmitters is mixed into a single channel. In Stereo mode, each transmitter's audio is output to a separate channel (left/right).

Тохиргоо

1. Install Batteries in Transmitters: Open the battery compartment of each BY-WM4 PRO Transmitter and insert two AAA batteries, observing the correct polarity. Close the compartment.
2. Лавалиер микрофонуудыг холбох: Plug the 3.5mm connector of each lavalier microphone into the microphone input jack on the top of each transmitter.
3. Хүлээн авагчийг төхөөрөмжид холбох: Plug the Type-C connector of the BY-WM4 PRO RXU Receiver directly into the Type-C port of your Android phone or other compatible recording device. Ensure it is securely seated.
4. Цахилгаан асаалттай дамжуулагч: Slide the power switch on each transmitter to the "ON" position. The Power LED on the transmitter will illuminate.
5. Хослуулах: The transmitters and receiver should automatically pair. If not, press the "Pair" button on the receiver. The Power LED on both the transmitter and receiver will indicate a successful connection (e.g., solid blue light).
6. Select Output Mode: Use the M/S switch on the receiver to select your desired audio output mode (Mono or Stereo).
7. Чихэвч холбох (заавал биш): For real-time audio monitoring, plug 3.5mm headphones into the headphone jack on the receiver.
8. Дууны хэмжээг тохируулах: Use the Volume +/- buttons on the receiver to adjust the output audio level as needed.

Зураг: Жишээ ньample setup of the BOYA BY-WM4 PRO-K6 with a smartphone.

Ашиглалтын заавар

Once the system is set up and paired, you can begin recording audio. The BY-WM4 PRO-K6 is designed for plug-and-play operation with most compatible devices.

• Бичлэг: Open your preferred audio or video recording application on your Type-C device. The system should be recognized as an external microphone.
• Хяналт: Use headphones connected to the receiver's 3.5mm jack to monitor the audio in real-time. This helps ensure optimal sound quality and proper microphone placement.
• Дууны хяналт: Adjust the output volume using the +/- buttons on the receiver. This controls the level sent to your recording device.
• Горим сонгох: Switch between Mono and Stereo modes using the M/S switch on the receiver based on your recording needs. Mono is suitable for single-person interviews or when you want both microphones mixed. Stereo is useful for separating two audio sources.
• Микрофоны байршил: For best audio quality, clip the lavalier microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth, ideally on clothing.

Засвар үйлчилгээ

• Цэвэрлэгээ: Use a soft, dry cloth to clean the exterior of the transmitters and receiver. Do not use liquid cleaners or solvents.
• Зай солих: Replace AAA batteries in the transmitters when the Power LED indicates low power or when audio quality degrades. Always use fresh batteries.
• Хадгалах: When not in use for extended periods, remove batteries from the transmitters to prevent leakage. Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
• Кабель арчилгаа: Avoid sharp bends or kinks in the lavalier microphone cables to prevent internal damage.

Алдааг олж засварлах

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

Баталгаат хугацааны мэдээлэл болон техникийн дэмжлэг авахыг хүсвэл албан ёсны BOYA-аас лавлана уу webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.

BOYA Official Webсайт: www.boya-mic.com