Nerf TURBINE CS-18

Nerf Elite 2.0 Turbine CS-18 Motorized Blaster

Зааварчилгааны гарын авлага

Танилцуулга

Thank you for choosing the Nerf Elite 2.0 Turbine CS-18 Motorized Blaster. This manual provides essential information for the safe and effective operation, setup, and maintenance of your blaster. Please read all instructions carefully before use.

Nerf Elite 2.0 Turbine CS-18 Motorized Blaster with 36 darts and 18-dart clip

Image: The Nerf Elite 2.0 Turbine CS-18 blaster, featuring its blue and orange design, an attached 18-dart clip, and 36 loose Elite darts.

Аюулгүй байдлын мэдээлэл

АНХААРУУЛГА: To avoid eye injury, do not aim at eyes or face. The use of eyewear is recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster.

АНХААРУУЛГА: амьсгал боогдох аюул – Small parts may be generated. Not for children under 3 years.

8 ба түүнээс дээш насныханд санал болгож байна.

Хайрцагт юу байна

Тохиргоо

1. Зай суурилуулах

The Nerf Elite 2.0 Turbine CS-18 Blaster requires 4 x 1.5V C alkaline batteries (not included). To install batteries:

  1. Locate the battery compartment on the blaster.
  2. Филлипс толгойтой халив (оруулаагүй) ашиглан зайны тасалгааны тагийг тайл.
  3. Insert 4 C alkaline batteries, ensuring correct polarity (+/-).
  4. Зайны тасалгааны тагийг сольж, боолтоор бэхлээрэй.
Battery icon showing 4 C/LR14 1.5V batteries required

Image: An illustration indicating the requirement for 4 x 1.5V C/LR14 batteries for the blaster.

2. Dart Loading

The blaster comes with an 18-dart clip and 36 Official Nerf Elite darts. Load 18 darts into the clip and keep the remaining 18 for quick reloads.

  1. Hold the 18-dart clip with the open end facing upwards.
  2. Insert darts one by one into the clip until it is full (18 darts). Ensure darts are inserted fully and correctly.
  3. Align the loaded clip with the blaster's magazine well and push it firmly upwards until it clicks into place.
Hand loading a Nerf dart into an orange 18-dart clip

Image: A hand demonstrating the process of loading a single Nerf dart into the top of an 18-dart clip.

Close-up of an 18-dart clip with a dart icon indicating capacity

Зураг: Нарийвчилсан view of the 18-dart clip, highlighting its capacity with an '18X' dart icon.

Operating the Blaster

1. Powering On and Firing

The Nerf Elite 2.0 Turbine CS-18 is a motorized blaster designed for rapid-fire action.

  1. Ensure the 18-dart clip is securely inserted into the blaster.
  2. Hold down the acceleration button (located below the main trigger) to power up the motor. You will hear the motor whirring.
  3. While holding the acceleration button, press the main trigger to launch darts. For rapid-fire, continue holding both buttons.
Person holding the Nerf Elite 2.0 Turbine CS-18 blaster in a firing stance

Image: A person wearing safety glasses, holding the Nerf Elite 2.0 Turbine CS-18 blaster in a ready-to-fire position.

2. Тохируулгын онцлогууд

The Turbine CS-18 blaster is equipped with 4 tactical rails and a barrel attachment point, allowing for customization with compatible Nerf accessories (sold separately).

Засвар үйлчилгээ

1. Цэвэрлэгээ

To keep your blaster in optimal condition:

2. Дарт арчилгаа

To ensure consistent performance, inspect darts regularly:

Алдааг олж засварлах

Үзүүлэлтүүд

Бүтээгдэхүүний хэмжээс2.62 x 22.5 x 9.75 инч
Зүйлийн жин1.1 фунт
Загварын дугаарE9481F03 (TURBINE CS-18)
Батерей шаардлагатай4 С батерей (оруулаагүй)
Санал болгож буй нас8 - 8 жил
Dart Capacity18 darts per clip
Max Firing Distance90 фут (27 метр) хүртэл

Баталгаат болон дэмжлэг

For warranty information, product support, or to purchase additional accessories and darts, please visit the official Nerf webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу. Аливаа баталгаат нэхэмжлэлийн хувьд худалдан авалтаа нотлох баримтаа хадгалаарай.

Холбогдох баримт бичиг - TURBINE CS-18

Урьдчилсанview NERF ULTRA DORADO Blaster: Зааварчилгаа болон аюулгүй байдлын гарын авлага
NERF ULTRA DORADO тэсрэх төхөөрөмжид зориулсан албан ёсны зааварчилгаа, үүнд ачих, галлах, аюулгүй байдлын анхааруулга, алдааг олж засварлах зэрэг орно. NERF ULTRA DORADO-гоо хэрхэн аюулгүй, үр дүнтэй ашиглах талаар мэдэж аваарай.
Урьдчилсанview Nerf Alpha Trooper CS-18 Plunger Replacement Guide
A step-by-step guide from iFixit on how to replace the plunger in a Nerf Alpha Trooper CS-18 dart blaster. Includes tools needed and detailed disassembly instructions.
Урьдчилсанview Nerf Roblox Arsenal импульсийн лазер тэсэлгээний заавар
Nerf Roblox Arsenal Pulse Laser моторт сумны тэсэлгээний төхөөрөмжийг хэрхэн ажиллуулах, ачаалах, галлах, гацах гацаа арилгах тухай дэлгэрэнгүй гарын авлага. Аюулгүй байдлын сэрэмжлүүлэг болон батерейны талаарх мэдээллийг багтаасан болно.
Урьдчилсанview Nerf Ultra One Blaster: Угсрах, ачих, галлах заавар
Nerf Ultra One моторт тэсэлгээний төхөөрөмжийг угсрах, ачих, ажиллуулах дэлгэрэнгүй гарын авлага, үүнд аюулгүй байдлын чухал мэдээлэл, алдааг олж засварлах зөвлөмжүүд багтсан болно.
Урьдчилсанview Nerf N-Strike Elite Strongarm Blaster: Хэрэглэгчийн гарын авлага
Nerf N-Strike Elite Strongarm тоглоомын тэсэлгээний албан ёсны заавар. Хэрхэн сум ачаалах, нэг удаагийн буудлага хийх, хурдан буудахын тулд Slam-Fire функцийг ашиглах талаар суралц. Аюулгүй байдлын анхааруулга, бүтээгдэхүүний дэлгэрэнгүй мэдээллийг багтаасан болно.
Урьдчилсанview Nerf Hyper MACH-100 Blaster: Ашиглалтын болон аюулгүй ажиллагааны заавар
Nerf Hyper MACH-100 тэсэлгээний хэрэгслийн дэлгэрэнгүй гарын авлага нь тэсэлгээний төхөөрөмжийг хэрхэн ачих, галлах, гацаа арилгах, тэсэлгээний төхөөрөмж хадгалах, аюулгүй байдлын чухал арга хэмжээг нарийвчлан харуулсан болно. Батерейны мэдээлэл болон бүтээгдэхүүний нийцтэй байдал орно.