Turck NI3-EG08K-AP6X-V1131

TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor User Manual

Model: NI3-EG08K-AP6X-V1131

1. Танилцуулга

This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.

Бүтээгдэхүүнийг аюулгүй, үр ашигтай ажиллуулахын тулд ашиглахаасаа өмнө энэхүү гарын авлагыг сайтар уншина уу.

2. Аюулгүй байдлын мэдээлэл

WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.

3. Бүтээгдэхүүн дууссанview

The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:

This sensor is designed for reliable detection of metallic targets in industrial environments.

4. Тохиргоо ба суурилуулалт

4.1 Суурилуулалт

  1. Select a mounting location where the sensor is protected from physical damage and excessive heat.
  2. Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
  3. Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.

4.2 Утас

The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:

Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.

5. Үйл ажиллагаа

Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:

The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.

6. Засвар үйлчилгээ

The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.

7. Алдаа засах

АсуудалБоломжит шалтгаанШийдэл
Sensor not detecting objects / LED always OFF
  • Цахилгаан хангамж байхгүй
  • Буруу утас
  • Object out of sensing range
  • Мэдрэгч гэмтсэн
  • Check power supply (10-30VDC).
  • 4.2-р хэсгийн дагуу утсыг шалгана уу.
  • Adjust target position within 3mm range.
  • Хэрэв мэдрэгч эвдэрсэн бол түүнийг солино уу.
Sensor always ON / LED always ON
  • Metallic object permanently in sensing range
  • Interference from surrounding metal
  • Мэдрэгч гэмтэлтэй
  • Remove any metallic objects from the sensing area.
  • Check mounting clearances.
  • Replace sensor if faulty.
Завсарлагатай илрүүлэлт
  • Сул холболтууд
  • Чичиргээ
  • Target speed too high
  • Бүх утсан холболтыг бэхлээрэй.
  • Тогтвортой бэхэлгээг хангах.
  • Verify target speed is within sensor capabilities (refer to datasheet).

8. Техникийн үзүүлэлтүүд

ПараметрҮнэ цэнэ
Загварын дугаарNI3-EG08K-AP6X-V1131
ҮйлдвэрлэгчTurck
Мэдрэгчийн хүрээ3 мм
Орон сууцны төрөлM8x1 Barrel, 8mm stainless steel full threading short barrel
Гаралтын төрөлPNP, Ердийн үед нээлттэй (NO)
Үйл ажиллагааны ботьtage10-30 VDC
ХолболтM8 Male Connector (Picofast 3-Pin QD)
Үзүүлэлт1 LED
ASINB0898TS8W2
Эхний боломжтой огноо27 оны тавдугаар сарын 2020

9. Баталгаат хугацаа ба дэмжлэг

For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.

For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.

Turck Official Webсайт: www.turck.com

Холбогдох баримт бичиг - NI3-EG08K-AP6X-V1131

Урьдчилсанview TURCK TBEC-LL-4RFID-8DXP RFID Interface: Instructions for Use
This document provides comprehensive instructions for the TURCK TBEC-LL-4RFID-8DXP RFID Interface, detailing its installation, connection, operation, and safety guidelines for industrial automation applications.
Урьдчилсанview TURCK NIMFE-EM12/4.6L88-UP6X-H1141/S1182 Magnetic Field Sensor - Technical Data & Mounting
Detailed technical specifications, features, wiring diagram, functional principle, and mounting instructions for the TURCK NIMFE-EM12/4.6L88-UP6X-H1141/S1182 magnetic field sensor with TIN coating for detecting ferromagnetic parts.
Урьдчилсанview TURCK FEN20-4IOL IO-Link мастер модуль: Хэрэглэх заавар
TURCK FEN20-4IOL IO-Link Мастер модулийн онцлог, системийн бүтэц, суурилуулалт, ашиглалтанд оруулах, үйлдвэрлэлийн автоматжуулалтын хэрэглээ зэргийг багтаасан дэлгэрэнгүй заавар.
Урьдчилсанview Turck MR... Radar Scanner Quick Start Guide
Quick start guide for the Turck MR... Radar Scanner, detailing its features for non-contact object detection, distance, angle, and velocity measurement. Includes installation, operation, technical specifications, safety guidelines, and compliance information for industrial automation applications. Supports IO-Link and SAE J1939 protocols.
Урьдчилсанview TURCK NIC...-EM30-IOL-... Inductive Couplers Quick Start Guide
Quick start guide for TURCK NIC...-EM30-IOL-... inductive couplers, detailing intended use, safety precautions, product features, installation, connection, operation, LED indicators, troubleshooting, and technical specifications. Includes information on IO-Link and SIO modes.
Урьдчилсанview TBPN-L5-4FDI-4FDX Safety Block I/O модуль: Хэрэглэх заавар
Энэхүү баримт бичигт TURCK TBPN-L5-4FDI-4FDX Safety Block I/O модулийг ашиглах зааврыг өгдөг. Энэ нь бүтээгдэхүүний тодорхойлолт, аюулгүй байдлын мэдээлэл, суурилуулалт, тохиргоо, ашиглалт, үйлдвэрлэлийн автоматжуулалтын хэрэглээний техникийн өгөгдлийг хамардаг.