Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Танилцуулга

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Багцын агуулга

Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44-Key IR Remote Control
  • 1 x 12V цахилгаан хувиргагч
  • 1 x Control Box (IR Receiver)

3. Суурилуулалт ба тохиргоо

Зөв суулгахын тулд дараах алхмуудыг дагана уу.

  1. Гадаргууг бэлтгэх: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
  2. Хэмжих ба зүсэх (заавал биш): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Туузыг бэхлэх: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Бүрэлдэхүүн хэсгүүдийг холбох:
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Цахилгаан адаптерийг ердийн цахилгаан залгуурт холбоно уу.
  5. Алсын зайг идэвхжүүлэх: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Ашиглалтын заавар

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Алсын удирдлагын функцууд:

  • Асаах/унтраах: Power button to turn the lights on or off.
  • Гэрэлтүүлгийн тохируулга: Up/Down arrows to increase or decrease brightness.
  • Өнгөний сонголт: 20 preset static colors, including Red, Green, Blue, and White.
  • Өөрөө хийх өнгөнүүд: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Динамик горимууд: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Засвар үйлчилгээ

LED гэрлийн урт наслалт, оновчтой ажиллагааг хангахын тулд дараах засвар үйлчилгээний дүрмийг дагаж мөрдөнө үү.

  • Цэвэрлэгээ: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
  • Байгаль орчин: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Наалдамхай арчилгаа: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Алдаа засах

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

АсуудалБоломжит шалтгаанШийдэл
Гэрэл асахгүй байна.
  • Цахилгаан адаптер холбогдоогүй байна.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
Алсын удирдлага ажиллахгүй байна.
  • Алсын удирдлага нь IR хүлээн авагч руу чиглүүлээгүй байна.
  • Алсын удирдлага болон хүлээн авагчийн хоорондох саад бэрхшээл.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Аливаа саад тотгорыг арилгах.
  • Check/replace remote battery.
Some LEDs show incorrect color or are off.
  • Damage to a section of the LED strip.
  • Буруу холболт.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Бүх холболт найдвартай эсэхийг шалгаарай.
LED strip falls off surface.
  • Surface not clean or smooth.
  • Insufficient pressure during installation.
  • Clean the surface thoroughly before re-applying.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Бүтээгдэхүүний техникийн үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
БрэндЛепро
Загварын дугаар410084-RGB-US-NF-a
ӨнгөRGB (Улаан, Ногоон, Цэнхэр)
Дотор/гадаа ашиглахДотор
Онцлог шинж чанарБагасгах боломжтой
Гэрлийн эх үүсвэрийн төрөлLED
Эрчим хүчний эх үүсвэрУтастай цахилгаан
МатериалЗэс, хуванцар
Хянагчийн төрөлАлсын удирдлага
Гэрлийн эх үүсвэрийн тоо300 (total for 32.8ft)
Ботьtage12 вольт
Ватtage36 ватт
Зүйлийн жин0.33 килограмм (11.6 унц)
Зүйлийн урт32.8 Feet (2 x 16.4ft)

8. Баталгаат хугацааны мэдээлэл

Энэ бүтээгдэхүүн нь а 2 жилийн баталгаат хугацаа from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Хэрэглэгчийн дэмжлэг

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.

Холбогдох баримт бичиг - 410084-RGB-US-NF-a

Урьдчилсанview Lepro S1 ухаалаг LED зурвас гэрэл хэрэглэгчийн гарын авлага
Lepro S1 ухаалаг LED туузан гэрлийн (Загвар: 2A3MAS1) суурилуулалт, ажиллагаа, онцлог шинж чанаруудын дэлгэрэнгүй хэрэглэгчийн гарын авлага.
Урьдчилсанview Lepro LED гэрлийн зурвас хэрэглэгчийн гарын авлага, техникийн үзүүлэлтүүд
Lepro LED гэрлийн туузны хэрэглэгчийн гарын авлага (PR4100067 цуврал загвар). Суурилуулалт, аюулгүй байдал, техникийн үзүүлэлтүүд, устгах мэдээлэл орно.
Урьдчилсанview Lepro S1 Smart LED Strip Light: Суурилуулалт, онцлог, аюулгүй байдлын гарын авлага
Lepro S1 Smart LED Strip Light-ийн иж бүрэн гарын авлага нь суурилуулалт, програмын холболт, дуут удирдлагын нэгдэл, аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ, техникийн үзүүлэлтүүд, баталгаат байдлын мэдээллийг багтаасан болно.
Урьдчилсанview Lepro AI LED байнгын гадна гэрэлтүүлгийн хэрэглэгчийн гарын авлага болон аюулгүй байдлын гарын авлага
Lepro AI LED байнгын гадна гэрэлтүүлгийн цогц гарын авлагад E1-30, E1-60, E1-90 загваруудын суурилуулалт, апп холболт, дуут удирдлага, аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ, техникийн үзүүлэлтүүдийг багтаасан болно.
Урьдчилсанview Lepro ZB1 AI LED гадаа гэрэлтүүлгийн хэрэглэгчийн гарын авлага ба техникийн үзүүлэлтүүд
Lepro ZB1 AI LED гадаа чийдэнгийн иж бүрэн хэрэглэгчийн гарын авлага, техникийн үзүүлэлтүүд, нарийвчилсан онцлог, суурилуулалт, дагаж мөрдөх мэдээлэл.
Урьдчилсанview Lepro R2 Ухаалаг LED гэрлийн суурилуулалт ба хэрэглэгчийн гарын авлага
Lepro R2 Smart LED Downlight суурилуулах, ашиглах дэлгэрэнгүй гарын авлага нь програмын холболт, дуут удирдлагын тохиргоо, суурилуулалт, аюулгүй байдлын мэдээллийг багтаасан болно.