Танилцуулга
This manual provides comprehensive instructions for setting up, operating, and maintaining your Sharp Digital Alarm Clock (Model SPC387). This clock features a clear red LED display, dual alarms, an ascending alarm volume, and battery backup for continued operation during power outages. Designed for ease of use, it is suitable for all users.
Зураг 1: Урд view of the Sharp Digital Alarm Clock, displaying 12:08 PM in red LEDs.
Бүтээгдэхүүний онцлог
- Simple & Hassle-Free Operation: Ашиглахад хялбар болгох зорилгоор бүтээгдсэн.
- Easy-Set Dual Alarms: Program two separate alarm times.
- Gentle Ascending Alarm: Сэрүүлгийн дууны хэмжээ аажмаар нэмэгддэг.
- Зайны нөөц: Maintains settings during power outages (requires 2x AA batteries, sold separately).
- Large Easy-Read Red LED Display: Bold, bright numbers for clear visibility.
Figure 2: Diagram illustrating the main features of the alarm clock, including the display size, dual alarm capability, ascending alarm, top controls, and battery backup option.
Тохируулах заавар
1. Эрчим хүчний холболт
Plug the AC power cord into a standard 120V AC wall outlet. The display will illuminate, and the clock will be ready for time setting.
2. Зайны нөөц суурилуулах
For battery backup, open the battery compartment cover located on the bottom of the unit. Insert two (2) new AA batteries (not included), observing the correct polarity (+ and -). Close the battery compartment cover. The battery backup feature will maintain time and alarm settings during a power interruption, but the display will not be illuminated.
Figure 3: The underside of the alarm clock, showing the battery compartment for backup power.
Ашиглалтын заавар
1. Цагийг тохируулах
- -г удаан дар ЦАГ button. The time display will begin to flash.
- барьж байхдаа ЦАГ товчийг дарна уу ЦАГ button to adjust the hour. Observe the PM indicator for correct AM/PM setting.
- Барьсаар байхад ЦАГ товчийг дарна уу МИНУТ минутыг тохируулах товч.
- -г суллана ЦАГ товчлуурыг дарж цагийг тохируулна уу.
2. Setting the Alarm (Dual Alarm)
This clock supports two independent alarms (AL1 and AL2).
- -г гулсуулна уу ALARM 1/2/DUAL switch to select either AL1 or AL2. The corresponding alarm indicator (AL1 or AL2) will illuminate on the display.
- -г удаан дар СЭРҮҮЛЭГ button. The alarm time display will begin to flash.
- барьж байхдаа СЭРҮҮЛЭГ товчийг дарна уу ЦАГ button to adjust the alarm hour. Observe the PM indicator.
- Барьсаар байхад СЭРҮҮЛЭГ товчийг дарна уу МИНУТ сэрүүлгийн минутыг тохируулах товчийг дарна уу.
- -г суллана СЭРҮҮЛЭГ button to set the alarm time.
- To activate the alarm, ensure the Сэрүүлэг ON / OFF switch is in the ON position. The selected alarm indicator (AL1 or AL2) will remain lit.
- To set the second alarm, repeat steps 1-6, selecting the other alarm (AL2 or AL1).
Зураг 4: Илүүview of the control buttons on the top of the alarm clock for setting time and alarms.
3. Түр хойшлуулах функцийг ашиглах
Сэрүүлэг дуугарах үед том товчлуурыг дар УНТАХ button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.
4. Turning Off the Alarm
To turn off the alarm completely, slide the Сэрүүлэг ON / OFF switch to the OFF position. The alarm indicator (AL1 or AL2) will turn off.
5. Ascending Alarm Volume
The alarm starts at a low volume and gradually increases, providing a gentle wake-up experience. If not turned off, the alarm will continue to increase in volume and frequency.
Figure 5: The alarm clock positioned on a nightstand, illustrating its compact size and the ascending alarm feature.
Засвар үйлчилгээ
- Цагийг зөөлөн, хуурай даавуугаар цэвэрлэ. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
- Төхөөрөмжийг хэт өндөр температур, нарны шууд тусгал эсвэл өндөр чийгшилд өртүүлэхээс зайлсхий.
- Replace backup batteries annually to ensure reliable performance.
Алдааг олж засварлах
| Асуудал | Шийдэл |
|---|---|
| Дэлгэц хоосон байна. | Ensure the AC power cord is securely plugged into a working outlet. If using battery backup, the display will not light up; it only preserves settings. |
| Сэрүүлэг дуугарахгүй байна. | байгаа эсэхийг шалгана уу Сэрүүлэг ON / OFF switch is in the ON position. Verify the alarm time is set correctly and the PM indicator is accurate. |
| Time/Alarm settings are lost after power outage. | Ensure fresh AA batteries are installed correctly in the battery backup compartment. |
| Clock feels hot. | Unplug the clock immediately and discontinue use. Contact customer support. |
| Alarm is too quiet/loud. | The alarm volume is ascending. Allow time for it to increase. There is no manual volume adjustment. |
| Буруу ботьtage warning (UK/Gulf regions). | This clock is designed for 110V-120V AC power. It is not compatible with 220V-240V systems without a proper voltage converter. Using an incorrect voltage may damage the unit and pose a safety risk. |
Үзүүлэлтүүд
- Брэнд: Хурц
- Загвар: SPC387
- Өнгө: Black - Red LED
- Дэлгэцийн төрөл: Дижитал LED
- Бүтээгдэхүүний хэмжээ: 5.5"W x 2.1"H
- Эрчим хүчний эх үүсвэр: Electrical (AC) with Battery Backup (2x AA batteries, not included)
- Материал: Хуванцар
- Барааны жин: 8.8 унц
- Онцлог шинж чанар: Dual Alarm, Ascending Alarm Volume, Snooze Function
Баталгаат болон дэмжлэг
This product comes with a Limited Warranty from Sharp. For detailed warranty information or technical support, please refer to the documentation included in your product packaging or visit the official Sharp webсайт.
For further assistance, you may also contact the seller, The Clock Shop - Sharp, through their Amazon store page.
Үйлдвэрлэгч: SHARP
