Танилцуулга
This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Зураг 1: Урд view of the Sharp Digital Alarm Clock.
Бүтээгдэхүүний онцлог
- AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
- High/Low Dimmer Control: Дэлгэцийн гэрэлтүүлгийг тохируулах боломжтой.
- Нөөц батерей: Pre-installed CR2032 battery for time settings retention during power outages.
- Цагийн бүсийн сонголт: Easily select your local time zone.

Figure 2: Key features of the Sharp Digital Alarm Clock.
Тохиргоо
1. Initial Power-Up and Time Zone Selection
- Locate the time zone switch on the bottom of the clock.
- Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
- Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.
2. Daylight Savings Time (DST) Adjustment
To adjust for Daylight Savings Time:
- Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
- For Standard Time, slide the switch to OFF to subtract one hour (-1 hr).
3. Батерейг нөөцлөх
The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.
Ашиглалтын заавар

Figure 3: Top panel controls and display indicators.
1. Сэрүүлгийг тохируулах
- дээр дарна уу Сэрүүлэг тохируулах button once. The alarm time will flash on the display.
- дээр дарна уу ЦАГ ТАВИСАН button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
- дээр дарна уу MINUTE SET сэрүүлгийн минутыг тохируулах товч.
- дээр дарна уу Сэрүүлэг тохируулах Сэрүүлгийн тохиргооны горимоос гарахын тулд товчийг дахин дарж баталгаажуулна уу.
2. Сэрүүлгийг асаах/унтраах
- Сэрүүлгийг асаахын тулд ON, товчийг дарна уу Сэрүүлэг ON / OFF button. The alarm indicator light on the display will illuminate.
- Сэрүүлгийг асаахын тулд OFF, товчийг дарна уу Сэрүүлэг ON / OFF button again. The alarm indicator light will turn off.
3. Түр хойшлуулах функц
Сэрүүлэг дуугарах үед том товчлуурыг дар УНТАХ button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.
4. Диммерийн удирдлага
LED дэлгэцийн гэрлийг тохируулахын тулд:
- дээр дарна уу DIMMER HI/LO button to toggle between high and low brightness settings.

Figure 4: Display brightness adjustment.
Засвар үйлчилгээ
Battery Replacement (CR2032)
The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.
- Unplug the clock from the electrical outlet.
- Locate the screw-secured battery compartment on the bottom of the clock.
- Unscrew the compartment cover and carefully remove the old CR2032 battery.
- Зөв туйлшралыг (+ дээшээ) байгаа эсэхийг шалгаад шинэ CR2032 батерейг оруулна уу.
- Replace the compartment cover and secure it with the screw.
- Plug the clock back into the electrical outlet.
Жич: Хуучин батерейг орон нутгийн дүрэм журмын дагуу хариуцлагатайгаар устгана уу.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Цагийн дэлгэц хоосон байна. | Хүч чадалгүй. | Ensure the clock is securely plugged into a working electrical outlet. Check the power source. |
| Цаг буруу байна. | Incorrect time zone selected; DST switch incorrect; Power interruption. | Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery. |
| Сэрүүлэг дуугарахгүй байна. | Alarm not activated; Incorrect alarm time set. | Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly. |
| Дэлгэц хэт тод/бүдэг байна. | Бүдгэрүүлэгчийн тохиргоог тохируулах шаардлагатай. | Press the DIMMER HI/LO button to cycle through brightness settings. |
Үзүүлэлтүүд
- Брэнд: Хурц
- Загвар: B089ZMSR39
- Өнгө: Black-red Led
- Дэлгэцийн төрөл: Дижитал
- Онцлог шинж чанар: Автомат тохиргоо
- Бүтээгдэхүүний хэмжээ: 5.5"W x 2.6"H
- Эрчим хүчний эх үүсвэр: Утастай цахилгаан
- Нөөц батерей: 1 x CR2032 Литий ион (багтсан)
- Барааны жин: 10.2 унц
- UPC: 049353004426
- Үйлдвэрлэгч: Хурц

Зураг 5: Бүтээгдэхүүний хэмжээ.
Нэмэлт мэдээлэл
For further assistance or product inquiries, please refer to the official Sharp webсайт эсвэл тэдний хэрэглэгчийн дэмжлэгтэй холбогдоно уу.
Энэ бүтээгдэхүүн нь зөвхөн дотор ашиглах зориулалттай.





