KEF KW1 Wireless Subwoofer Receiver (KW1RX) Instruction Manual
Загвар: KW1RX
Танилцуулга
The KEF KW1 Wireless Subwoofer Receiver (KW1RX) is designed to provide high-quality, wireless audio transmission to a KEF subwoofer. This receiver allows for flexible placement of your subwoofer without the need for long audio cables, ensuring a clean setup and optimal bass performance. It operates by receiving signals from a KEF KW1 Wireless Subwoofer Transmitter (sold separately), delivering pristine 24-bit/48kHz high-resolution audio.
Зураг: Урд view of the KEF KW1RX Wireless Subwoofer Receiver, a compact black rectangular device with the KEF logo.
Аюулгүй байдлын чухал заавар
- Төхөөрөмжийг ажиллуулахын өмнө эдгээр зааврыг анхааралтай уншина уу.
- Эдгээр зааврыг цаашид лавлах зорилгоор хадгална уу.
- Бүтээгдэхүүн болон ашиглалтын зааварт заасан бүх анхааруулгыг анхаарч үзээрэй.
- Ашиглалт болон засвар үйлчилгээний бүх зааврыг дагаж мөрдөнө үү.
- Энэ төхөөрөмжийг усны ойролцоо эсвэл хэт чийглэг орчинд бүү ашиглаарай.
- Зөвхөн хуурай даавуугаар цэвэрлэ.
- Агааржуулалтын нүхийг хааж болохгүй. Үйлдвэрлэгчийн зааврын дагуу суурилуулна.
- Радиатор, халаалтын төхөөрөмж, зуух болон бусад төхөөрөмж (үүнд ampөргөгч) дулаан үүсгэдэг.
- Цахилгааны утсыг гишгэх, хавчихаас хамгаалаарай, ялангуяа залгуур, залгуур, төхөөрөмжөөс гарах цэг дээр.
- Зөвхөн үйлдвэрлэгчээс заасан хавсралт/дагалдах хэрэгслийг ашиглана уу.
- Аянга шуурганы үед эсвэл удаан хугацаагаар ашиглаагүй үед энэ төхөөрөмжийг цахилгааны залгуураас салга.
- Бүх үйлчилгээг мэргэшсэн үйлчилгээний ажилтнуудад шилжүүлээрэй. Төхөөрөмж нь цахилгаан тэжээлийн утас, залгуур гэмтсэн, шингэн асгарсан, эд зүйл унасан, бороо, чийгэнд өртсөн, хэвийн ажиллахгүй байгаа тохиолдолд засвар үйлчилгээ хийх шаардлагатай. , эсвэл хасагдсан.
Хайрцагт юу байна
- KEF KW1RX Wireless Subwoofer Receiver
Хайрцгийг задлахдаа бүх эд ангиуд байгаа бөгөөд гэмтээгүй эсэхийг шалгаарай.
Тохируулах гарын авлага
Connecting the KW1RX Receiver
The KW1RX receiver is designed to connect directly to compatible KEF subwoofers. Follow these steps for proper connection:
- Locate the dedicated KW1 port on your KEF subwoofer. This port is typically found on the rear panel of the subwoofer.
- Align the KW1RX receiver with the KW1 port on the subwoofer. Ensure the connectors on the receiver match the port.
- Gently push the KW1RX receiver into the KW1 port until it is securely seated. It should fit snugly and make a firm connection.
- Once connected, the KW1RX receiver will draw power directly from the subwoofer. No separate power adapter is needed for the receiver.
Зураг: Ойролцоогоор view showing the KEF KW1RX receiver plugged into the dedicated port on a subwoofer's control panel, next to RCA inputs.
Зураг: Ар талд view of a KEF subwoofer with the KW1RX receiver attached, illustrating its integration with the subwoofer's back panel.
Pairing with the KW1 Transmitter (Sold Separately)
For the KW1RX receiver to function, it must be paired with a KEF KW1 Wireless Subwoofer Transmitter. The transmitter connects to your audio source (e.g., AV receiver, pre-amplifier). Follow these steps to establish a wireless connection:
- Ensure both the KW1RX receiver (connected to your subwoofer) and the KW1 transmitter (connected to your audio source) are powered on.
- On the KW1RX receiver, locate the 'PAIR' button. This is typically a small, recessed button on the top or side of the unit.
- Press and hold the 'PAIR' button on the KW1RX receiver for approximately 3 seconds until the status indicator light begins to flash rapidly. This indicates it is in pairing mode.
- Within 30 seconds, press and hold the 'PAIR' button on the KW1 transmitter (refer to the transmitter's manual for its exact location) until its status indicator light also flashes rapidly.
- Both units will search for each other. Once a connection is established, the status indicator lights on both the receiver and transmitter will turn solid, indicating a successful pairing.
- If pairing fails, ensure both units are within range (up to 15 meters line of sight) and repeat the pairing process.
Зураг: дээд view of the KEF KW1RX receiver, highlighting the 'PAIR' button for wireless connection setup.
Үйл ажиллагаа
Once the KW1RX receiver is successfully paired with the KW1 transmitter, it will automatically receive audio signals from your source device. The receiver operates on 5.2 GHz and 5.8 GHz selectable digital wireless links to ensure stable and near-lossless audio transmission.
- Төлөв заагч гэрэл: Observe the LED indicator on the KW1RX. A solid light indicates a stable connection. A flashing light typically indicates pairing mode or a lost connection.
- Автомат холболт: After initial pairing, the KW1RX and KW1 transmitter should automatically reconnect when both are powered on and within range.
- Adding a Second Subwoofer: The KW1 system allows for a single transmitter to deliver audio to two KW1RX receivers, enabling the use of two subwoofers for enhanced bass performance and room coverage. Simply connect a second KW1RX to another compatible KEF subwoofer and pair it using the same method.
Арчилгаа, засвар үйлчилгээ
To ensure the longevity and optimal performance of your KEF KW1RX Wireless Subwoofer Receiver, follow these simple care guidelines:
- Цэвэрлэгээ: Use a soft, dry, lint-free cloth to clean the exterior of the receiver. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the finish or internal components.
- Байршил: Ensure the receiver is not exposed to extreme temperatures, direct sunlight, or high humidity. While connected to the subwoofer, ensure adequate ventilation around the subwoofer's rear panel.
- Харьцуулах: Handle the receiver with care. Avoid dropping it or subjecting it to strong impacts.
- Хадгалах: If storing the receiver for an extended period, disconnect it from the subwoofer and store it in a cool, dry place, preferably in its original packaging.
Алдааг олж засварлах
If you encounter issues with your KW1RX receiver, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сабвуферээс дуу гарахгүй байна | Receiver not powered on or not connected properly. Дамжуулагчтай холбогдоогүй байна. Transmitter not sending signal. | Ensure KW1RX is securely connected to the subwoofer. Verify the subwoofer is powered on. Perform the pairing process again (see Setup Guide). Check the KW1 transmitter's connection to your audio source and its power status. |
| Дуу чимээ эсвэл дохио тасалдах | Бусад утасгүй төхөөрөмжүүдийн хөндлөнгийн оролцоо. Receiver and transmitter too far apart. Нэгжүүдийн хоорондох саад бэрхшээл. | Move the KW1RX and KW1 transmitter away from other wireless devices (e.g., Wi-Fi routers, cordless phones). Reduce the distance between the receiver and transmitter. Ensure there are no large metal objects or thick walls directly between the units. |
| Хослуулах амжилтгүй боллоо | Буруу холбох журам. Units out of range. Түр зуурын алдаа. | Ensure you are following the pairing steps precisely, pressing buttons at the correct times. Bring the receiver and transmitter closer together during pairing. Power cycle both the subwoofer (with receiver attached) and the transmitter, then attempt pairing again. |
| Status light flashing rapidly | In pairing mode or searching for connection. | If you intend to pair, proceed with the transmitter pairing. If not, ensure the transmitter is powered on and within range; the light should turn solid when connected. |
Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | KW1RX |
| Холболтын технологи | Утасгүй |
| Утасгүй давтамж | 5.2 GHz & 5.8 GHz selectable digital wireless link |
| Аудио нягтрал | 24 бит / 48 кГц |
| Хоцролт | <17 мс |
| Үйл ажиллагааны зай | Up to 15 meters (30m / 100 ft line of sight) |
| Тохиромжтой төхөөрөмжүүд | KEF Subwoofers with KW1 port |
| Оруулсан бүрэлдэхүүн хэсгүүд | KEF KW1RX Wireless Subwoofer Receiver |
| Өнгө | Хар |
| Зүйлийн жин | 4.6 унц |
| Багцын хэмжээ | 4.96 x 3.27 x 1.57 инч |
Баталгаат болон хэрэглэгчийн дэмжлэг
KEF products are manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your original product purchase or visit the official KEF webсайт.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact KEF customer support through their official website or authorized service centers. When contacting support, please have your product model number (KW1RX) and purchase information ready.
Official KEF Webсайт: https://us.kef.com/
