Sovol 3D SL1 Curing Machine User Manual

1. Танилцуулга

The Sovol 3D SL1 Curing Machine is designed for post-processing resin 3D printed models. It utilizes 405nm UV light to thoroughly cure resin prints, enhancing their hardness and durability. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting of your curing machine.

2. Аюулгүй ажиллагааны заавар

• Хэт ягаан туяанд өртөх: Avoid direct exposure to UV light. Although the machine has a see-through window, prolonged staring at the UV light is not recommended.
• Агааржуулалт: Ensure adequate ventilation in the operating area, especially when curing models that may still have residual resin or fumes.
• Давирхайтай харьцах: Always wear appropriate personal protective equipment (PPE) such as gloves and safety glasses when handling uncured resin or freshly printed models.
• Эрчим хүчний хангамж: Use only the provided power adapter. Do not operate the machine with damaged cables or plugs.
• Байршил: Place the machine on a stable, level surface away from flammable materials and direct sunlight.
• Хүүхэд ба тэжээвэр амьтад: Машиныг хүүхэд болон гэрийн тэжээвэр амьтдын гар хүрэхгүй газар хадгална уу.

3. Багцын агуулга

Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:

• Sovol 3D SL1 Curing Machine Unit
• Light-Driven Turntable
• Цахилгаан хувиргагч (12V DC, 2А)
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

4. Бүтээгдэхүүний онцлог

• Three 405nm LED Strips: Features two LED strips on the box wall and an additional strip on the ceiling, totaling 14 UV LED lights for fast and even curing.
• Light-Driven Turntable: The turntable rotates by absorbing UV light, eliminating the need for batteries and ensuring 360-degree exposure.
• Reflective Interior: An internal reflective sheet focuses UV light for enhanced curing efficiency.
• Intelligent Time Control: Offers selectable curing times of 2, 4, or 6 minutes for convenience.
• See-through Window: Allows observation of the curing process while providing UV protection.
<

Зураг: Дотоод view showing the 14 405nm UV LED lights and multi-angle lighting design for comprehensive curing.

Image: Close-up of the reflective sheet inside the curing machine, designed to enhance UV light distribution for better curing results.

Image: The curing machine in operation, highlighting the UV protection design and the see-through window that allows observation of the 360-degree curing process.

5. Тохиргоо

1. Баглаа задлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана.
2. Байршил: Place the curing machine on a stable, flat surface.
3. Install Turntable: Position the light-driven turntable securely on the base inside the curing chamber.
4. Эрчим хүчийг холбох: Insert the barrel connector of the power adapter into the power jack at the back of the unit. Plug the power adapter into a suitable electrical outlet.

Зураг: Тэсэрсэн view of the Sovol SL1 Curing Machine, labeling key components such as the handle, power switch, control panel, power jack, view window, UV light, and turntable.

6. Ашиглалтын заавар

1. Асаах: Flip the main power switch located at the back of the unit to the 'On' position.
2. Байршлын загвар: Carefully place your resin 3D printed model onto the center of the turntable inside the curing chamber. Ensure the model is clean and free of excess uncured resin.
3. Хаалга хаах: Ensure the curing chamber is properly closed.
4. Select Curing Time: Use the 'Time' button on the control panel to select the desired curing duration (2, 4, or 6 minutes). The selected time will be indicated by an illuminated LED.
5. Хатуурч эхлэх: Press the 'Start' button to begin the curing process. The UV lights will activate, and the turntable will start rotating.
6. Явцыг хянах: You can observe the curing process through the see-through window.
7. Stop Curing: The machine will automatically stop after the selected time. To stop curing manually, press the 'Stop' button.
8. Загварыг устгах: Once curing is complete, open the chamber and carefully remove the cured model.

Зураг: дээд view of the Sovol SL1 Curing Machine's inductive control interface, showing the On/Off switch, Start/Stop buttons, and time selection options (2min, 4min, 6min).

7. Засвар үйлчилгээ

• Цэвэрлэгээ: Regularly clean the interior and exterior of the machine with a soft, dry cloth. If resin spills occur, clean immediately with isopropyl alcohol (IPA) and a soft cloth. Ensure the machine is unplugged before cleaning.
• Эргэлтийн ширээ: Keep the turntable clean to ensure smooth rotation.
• Хадгалах: When not in use, store the machine in a cool, dry place away from direct sunlight.

8. Алдаа засах

• Машин асахгүй байна:
  • Check if the power adapter is securely connected to both the machine and the electrical outlet.
  • Ensure the main power switch at the back of the unit is in the 'On' position.
  • Цахилгаан залгуур ажиллаж байгаа эсэхийг шалгана уу.
• Turntable Does Not Rotate:
  • Ensure the turntable is correctly seated on its base.
  • Confirm that the UV lights are active, as the turntable is light-driven.
  • Gently nudge the turntable to initiate rotation if it's stuck.
• Тэгш бус хатах:
  • Ensure the model is centered on the turntable.
  • Verify the turntable is rotating properly.
  • Increase the curing time if necessary.
  • Ensure the reflective interior is clean and intact.
• Товчнууд хариу өгөхгүй байна:
  • Ensure your finger makes full contact with the inductive button surface.
  • Try pressing firmly and directly on the button.

9. Техникийн үзүүлэлтүүд

Image: Diagram illustrating the product dimensions of the Sovol SL1 Curing Machine (196mm width, 240mm height) and the maximum print size it can accommodate (163mm width, 166mm height).

10. Баталгаат хугацаа ба дэмжлэг

Sovol 3D provides support for its products. If you encounter any questions or issues with your Sovol 3D SL1 Curing Machine, please feel free to contact us. We are committed to assisting you in resolving any problems and providing professional technical support.

For warranty information and customer service, please refer to the contact details provided on the official Sovol 3D webсайт эсвэл таны худалдан авалтын баримт бичиг.