Thank you for choosing the Paulmann 94453 Capea LED Outdoor Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Image: The Paulmann Capea LED Outdoor Wall Lamp, showing the product itself and its retail packaging. The lamp is black, with a conical shade and an integrated motion sensor at the base.
Аюулгүй байдлын чухал заавар
Цахилгааны аюулгүй байдал: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or repair.
Гадна хэрэглээ: This product is designed for outdoor use (IP44 rated). Ensure all connections are properly sealed to prevent water ingress.
Суурилуулалт: Mount the fixture securely on a stable surface. Do not install on flammable surfaces.
Гэрлийн эх үүсвэр: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the light source compartment.
Температур: l-ийг хааж болохгүйamp with insulating material. Ensure adequate air circulation around the fixture.
1x Paulmann Capea LED Outdoor Wall Lamp (Загвар 94453)
Угсрах заавар
Суурилуулах тоног төхөөрөмж (эрэг, ханын залгуур) - (Assumed, as typical for wall lamps)
Техникийн үзүүлэлтүүд
Загварын дугаар
94453
Брэнд
Полманн
Эрчим хүчний эх үүсвэр
АС (230 вольт)
Ватtage
6 ватт
Гэрлийн урсгал
600 люмен
Өнгөний температур
3000 Келвин (Дулаан цагаан)
Өнгө дүрслэх индекс (CRI)
80
Дундаж амьдрал
30000 цаг
Хамгаалалтын анги
IP44 (ус цацахаас хамгаалсан)
Материал
Хөнгөн цагаан
Өнгө
Хар
Хэмжээ (L x W x H)
9.6 x 15.3 x 16.5 см
Жин
0.61 кг
Онцлог шинж чанарууд
Нэгдсэн хөдөлгөөн мэдрэгч
Image: Technical drawing showing the dimensions of the Paulmann Capea LED Outdoor Wall Lamp: 153mm width, 165mm height, and 96mm depth.
Суулгах гарын авлага
Эхлэхээсээ өмнө: Ensure the main power supply to the installation area is switched off at the circuit breaker. Use appropriate tools and safety equipment.
Суулгах байршлыг бэлтгэх: Choose a suitable wall location for the lamp, ensuring it is a stable surface and allows for proper wiring. Mark the drilling points for the mounting bracket.
Өрөмдлөгийн цооног: Drill holes at the marked points and insert appropriate wall plugs (if necessary).
Утас: Connect the electrical wires from your mains supply to the terminal block inside the lamp fixture. Ensure correct polarity (Live, Neutral, Earth) and secure all connections tightly. Refer to local electrical codes.
L хавсарганаamp: l-г болгоомжтой холбоно ууamp fixture to the mounting bracket, ensuring no wires are pinched. Secure the lamp байрандаа.
Image: The Paulmann Capea LED Outdoor Wall Lamp shown with its packaging, which illustrates basic installation steps and features like the motion sensor and IP44 rating.
Ашиглалтын заавар
The Paulmann Capea LED Outdoor Wall Lamp features an integrated motion sensor for automatic operation.
Хөдөлгөөн мэдрэгчийн тохиргоо
The motion sensor can be adjusted to suit your specific needs. Typically, there are controls for:
Илрүүлэх өнцөг: Approximately 90 degrees.
Илрүүлэх хүрээ: 2-8 метр.
Гэрлийн мэдрэмж (LUX): Determines the ambient light level at which the sensor activates the lamp.
ON < 20 Lux: Лamp will turn on when motion is detected and the ambient light is below 20 Lux (dark conditions).
OFF > 20 Lux: Лamp will remain off when the ambient light is above 20 Lux (daylight conditions).
Асаах цаг: Sets the duration the light remains on after motion is detected. Adjustable from approximately 5 seconds to 5 minutes.
Adjust these settings using the small dials or switches located on the motion sensor unit, usually found at the bottom of the lamp. Use a small screwdriver if necessary.
Image: A diagram illustrating the motion sensor's detection angle (90 degrees), range (2-8 meters), and light sensitivity settings (On < 20 Lux / Off > 20 Lux), along with the adjustable time duration (5 seconds - 5 minutes).
Зураг: Ойрын зураг view of the integrated motion sensor located at the base of the Paulmann Capea LED Outdoor Wall Lamp, showing its spherical lens.
Гэрлийн эх үүсвэр: The LED light source is integrated and designed for long-term use (30,000 hours). It is not user-replaceable. If the LED fails, the entire fixture typically needs replacement.
Шалгалт: l-ийг үе үе шалгаж байхamp for any signs of damage, loose connections, or wear. Address any issues promptly.
Алдааг олж засварлах
Асуудал
Боломжит шалтгаан
Шийдэл
Lamp асахгүй байна.
Цахилгаан хангамж байхгүй.
Буруу утас.
Motion sensor settings (LUX) too high for current ambient light.
Adjust LUX setting to a lower value (e.g., for darker activation).
Contact customer support if lamp is still under warranty.
Lamp байнга асаалттай байдаг.
Тасралтгүй хөдөлгөөн илэрсэн.
Motion sensor faulty.
Утасны алдаа.
Check for objects or activities continuously triggering the sensor.
Adjust sensor sensitivity or range.
Утасыг баталгаажуулна уу.
Lamp turns on too frequently or at wrong times.
Мэдрэгчийн мэдрэмж хэт өндөр байна.
LUX setting too low (activates in brighter conditions).
Sensor detecting distant movement (e.g., cars, animals).
Adjust sensor sensitivity and range.
Increase LUX setting so it only activates in darker conditions.
l-ийн байрлалыг өөрчилamp or adjust sensor angle if possible to reduce unwanted triggers.
Баталгаат болон хэрэглэгчийн дэмжлэг
Paulmann products are manufactured to high quality standards. This product comes with a 5-year guarantee, as indicated on the packaging. For warranty claims, technical assistance, or further inquiries, please contact your retailer or Paulmann customer support directly. Keep your proof of purchase for warranty purposes.
For more information, visit the official Paulmann webсайт: www.paulmann.com
Устгах мэдээлэл
This product contains electronic components and an integrated LED light source. Do not dispose of it with general household waste. Please take it to a designated collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.
