Peak Kyan үзэг эргэлдэгч шивээсний машины хэрэглэгчийн гарын авлага

Танилцуулга

The Peak Kyan Pen Rotary Tattoo Machine is engineered for precision and control, offering an ergonomic design that mimics the feel of a traditional pen. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Peak Kyan Pen.

This machine is equipped with a powerful spring system Faulhaber Motor, designed for reliable performance in professional tattooing environments. It operates within a working voltage range of 6-10V and features a 4mm stroke length, making it compatible with a wide array of cartridge needles.

Багцын агуулга

Upon unboxing your Peak Kyan Pen Rotary Tattoo Machine, please verify that all the following components are included:

• Peak Kyan Pen Rotary Tattoo Machine (Blue)
• 3 ширхэг О-цагираг
• 1 x DC тэжээлийн утас

Image: The Peak Kyan Pen Rotary Tattoo Machine shown alongside its retail packaging.

Тохиргоо

Follow these steps to prepare your Peak Kyan Pen for operation:

1. Машиныг задлах: Carefully remove the Peak Kyan Pen and all accessories from its packaging.
2. Эрчим хүчийг холбох: Insert the DC power cord into the designated port at the base of the tattoo machine. Connect the other end of the DC power cord to a compatible power supply (not included).
3. Attach Cartridge Needle: Select your desired cartridge needle. Insert the needle into the machine's front opening, twisting gently until it locks securely into place. Ensure the needle is properly seated to prevent movement during operation.
4. Зүүний гүнийг тохируулах: Rotate the grip of the machine to adjust the needle depth according to your tattooing requirements.

Image: The Peak Kyan Pen Rotary Tattoo Machine with its DC power cord attached, ready for connection to a power supply.

Ашиглалтын заавар

The Peak Kyan Pen is designed for intuitive use. Adhere to standard tattooing safety and hygiene protocols.

• Асаах: Once connected to a power supply, activate the power supply to begin operation.
• Ботьtage Тохируулга: Боть тохируулна ууtage on your power supply within the recommended range of 6-10V to achieve the desired speed and power for your tattooing technique. Lower voltages result in slower speeds, while higher voltages increase speed.
• Needle Compatibility: This machine is compatible with a wide variety of standard cartridge needles. Always ensure the cartridge needle is securely attached before operation.
• Цус харвалтын урт: The machine features a fixed 4mm stroke length, suitable for various tattooing styles including lining, shading, and color packing.

Засвар үйлчилгээ

Proper maintenance is crucial for the longevity and optimal performance of your Peak Kyan Pen. Always ensure the machine is disconnected from power before performing any maintenance.

Image: A visual guide illustrating key maintenance points for the Peak Kyan Pen, including lubrication of needle plungers.

• Тосолгоо: Every other time you switch needles, apply a small amount of lubricant to the needle plungers. This practice helps maintain the machine's smooth operation and extends its lifespan.
• Цэвэрлэгээ: The Peak Kyan Pen can be effectively wipe-cleaned using disinfectant wipes, such as Madacide. Ensure thorough cleaning after each use to maintain hygiene standards.
• Autoclave Safety: The Kyan Pen grip is designed to be autoclave-safe. However, it is critical to note that the machine body and motor are NOT autoclave-safe. Do not autoclave these components.
• Screw Lubrication: Before re-screwing the grip onto the machine body, it is recommended to lubricate the screws with Vaseline or synthetic grease/oil. This facilitates easier assembly and disassembly and prevents wear.

Алдааг олж засварлах

If you encounter issues with your Peak Kyan Pen, consider the following common troubleshooting steps:

• Машин асахгүй байна:
  • Ensure the DC power cord is securely connected to both the machine and the power supply.
  • Verify that your power supply is turned on and functioning correctly.
  • Цахилгаан залгуурын ажиллагааг шалгана уу.
• Inconsistent Operation/Weak Power:
  • Номыг баталгаажуулна ууtage setting on your power supply is within the recommended 6-10V range.
  • Inspect the DC power cord for any damage or loose connections.
  • Ensure the cartridge needle is not jammed or improperly seated.
  • Check if the needle plungers require lubrication as per maintenance instructions.
• Хэт их чичиргээ эсвэл дуу чимээ:
  • Verify that the cartridge needle is correctly and securely inserted.
  • Ensure all components, especially the grip, are tightened properly.
  • Lubricate the needle plungers if they feel dry or stiff.

Хэрэв эдгээр алхмууд нь асуудлыг шийдэж чадахгүй бол нэмэлт тусламж авахын тулд Дэмжлэгийн хэсгээс лавлана уу.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For information regarding warranty coverage, returns, or technical support for your Peak Kyan Pen Rotary Tattoo Machine, please contact Peak customer service directly. You can typically find contact details on the manufacturer's official webсайт эсвэл бүтээгдэхүүнийг худалдан авсан жижиглэн худалдаалагчаар дамжуулан.

Баталгаат хугацааны нэхэмжлэлийн хувьд худалдан авалтын баримтаа хадгалахыг зөвлөж байна.