1. Танилцуулга
Thank you for choosing the Tasmor 76-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.
2. Бүтээгдэхүүн дууссанview
2.1 Гол онцлогууд
- Өндөр тод байдал: Equipped with 76 warm white energy-saving LEDs, providing 170 lumens of soft, flicker-free light. Color rendering index (CRI) is over 80.
- Хөдөлгөөн мэдрэгчийн горим: Features 3 lighting modes (ON/OFF/Auto). In Auto mode, it detects motion within 3 meters (approximately 10 feet) in darkness and automatically turns off after about 18 seconds of no motion. The detection angle is 120°. If ambient brightness is sufficient, the light will not activate.
- USB цэнэглэдэг: Conveniently rechargeable via the included USB cable, eliminating the need for frequent battery replacement.
- Хялбар суурилуулалт: Magnetic attachment allows for simple installation and removal. No tools required.
- Олон талын хэрэглээ: Ideal for kitchens, stairs, cabinets, offices, walls, mirrors, closets, hallways, basements, workshops, garages, or as an emergency light.
- Удаан эдэлгээтэй барилга: Лamp housing is made of high-quality aluminum alloy, which is rust-proof and easy to clean.
2.2 Багцын агуулга
- Tasmor 76-LED Motion Sensor Cabinet Light
- USB цэнэглэгч кабель
- Magnetic Metal Sheets (for adhesive mounting)
- Хэрэглэгчийн гарын авлага
Image 2.2.1: The Tasmor 76-LED Motion Sensor Cabinet Light, showing the light bar, USB charging cable, and two magnetic metal sheets for installation.
3. Техникийн үзүүлэлтүүд
| Брэнд | Тасмор |
| Загвар | B08LV41TPC |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 40.5 x 4 x 0.95 см (15.9 x 1.6 x 0.4 инч) |
| Жин | 220 грамм (0.48 фунт) |
| Материал | Iron (housing) |
| Загвар | Орчин үеийн |
| Цайвар өнгө | Халуун цагаан |
| LED-ийн тоо | 76 |
| Гэрлийн урсгал | 170 люмен |
| Өнгөний температур | 3000 мянга |
| Өнгө дүрслэх индекс (CRI) | 80.00 |
| Ботьtage | 3.7 вольт |
| Хүч | 3 ватт |
| Онцлог шинж чанар | Хөдөлгөөн мэдрэгч |
| Эрчим хүчний эх үүсвэр | Батерейгаар ажилладаг (USB цэнэглэдэг) |
4. Тохиргоо ба суурилуулалт
The Tasmor cabinet light is designed for easy, tool-free installation using its magnetic attachment system.
4.1 Суурилуулалтын үе шатууд
- Гадаргууг бэлтгэх: Хүссэн суулгах гадаргууг хуурай, тоос, өөх тосгүй байлгахын тулд сайтар цэвэрлэнэ.
- Attach Metal Sheets: Peel off the protective film from the adhesive side of the provided magnetic metal sheets. Firmly press the metal sheets onto the cleaned surface. Ensure they are spaced appropriately for the length of the light bar.
- Гэрэл уулан: The light bar has built-in magnets. Simply align the light bar with the installed metal sheets and allow the magnets to secure it in place.
Image 4.1.1: Step-by-step visual guide for installing the light: 1. Cleaning the surface, 2. Attaching the adhesive metal sheet, 3. Magnetically mounting the light bar.
The magnetic attachment allows for easy removal of the light bar for charging or repositioning.
4.2 Жишээ ньampПрограмууд
Image 4.2.1: Lights installed inside a closet for enhanced visibility.
Image 4.2.2: Lights providing illumination in a bedroom wardrobe and above a desk.
5. Ашиглалтын заавар
The light features a switch to select between three operating modes:
- Асаах горим: Гэрэл тасралтгүй асаалттай хэвээр байна.
- OFF горим: Гэрэл унтарсан хэвээр байна.
- AUTO Mode (Motion Sensor): The light will automatically turn on when motion is detected in a dark environment. It will turn off approximately 18 seconds after motion ceases. The detection range is up to 3 meters (10 feet) with a 120° angle. The sensor will not activate if the ambient light is sufficient.
Image 5.1.1: The light operating in Auto mode, detecting motion within a 120° angle in a kitchen environment.
6. Төхөөрөмжийг цэнэглэж байна
The Tasmor cabinet light is equipped with a rechargeable battery. When the battery is low, the light output may diminish or cease. To charge:
- Remove the light bar from its magnetic mounting.
- Connect the included USB charging cable to the charging port on the light bar.
- Connect the other end of the USB cable to a standard USB power source (e.g., USB adapter, power bank, computer USB port).
- An indicator light will show the charging status: typically red for charging and blue for fully charged.
Image 6.1.1: Close-up of the light bar showing the USB charging port and indicator lights for 'Recharging' (red) and 'Fully Charged' (blue).
7. Арчилгаа, засвар үйлчилгээ
- Цэвэрлэгээ: Use a soft, dry cloth to wipe the surface of the light. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the electronic components. Do not use abrasive cleaners or solvents.
- Хадгалах: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- Байгаль орчин: Avoid exposing the light to extreme temperatures, direct sunlight, or high humidity.
8. Алдааг олж засварлах гарын авлага
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| AUTO горимд гэрэл асахгүй. |
|
|
| Гэрэл унтрахгүй. |
|
|
| Гэрэл бүдэг байна. | Батерей бага байна. | Гэрлийг бүрэн цэнэглэ. |
| Гэрэл цэнэглэхгүй. |
|
|
9. Баталгаат хугацаа ба хэрэглэгчийн дэмжлэг
Information regarding specific warranty terms and conditions for this product is not available in the provided data. For warranty claims, technical support, or any other inquiries, please contact Tasmor customer service through your purchase platform or the official Tasmor webсайт.
