TASMOR 10M USB RGB LED Strip Light User Manual
Model: JYX-5050x18N
Брэнд: Тасмор
Танилцуулга
Thank you for choosing the TASMOR 10M USB RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor settings, including bedrooms, living rooms, kitchens, and for special occasions like parties and holidays. This manual provides essential information for safe installation, operation, and maintenance of your LED strip light.
Аюулгүй байдлын мэдээлэл
- Энэ бүтээгдэхүүн нь зориулагдсан зөвхөн дотор ашиглах. Ус эсвэл өндөр чийгшилд бүү өрт.
- Ensure the installation surface is clean, dry, and smooth for proper adhesion.
- Do not connect the LED strip to power while it is still rolled up, as this may cause overheating.
- Зөвхөн дагалдаж ирсэн цахилгаан адаптер болон эд ангиудыг ашиглана уу.
- Do not attempt to repair or modify the product. Refer to qualified personnel for service.
- Хүүхдийн гар хүрэхгүй газар хадгална.
- The LED strip can be cut at designated marks (every 4 poles, 10mm wide). Ensure power is disconnected before cutting.
Бүтээгдэхүүн дууссанview
The TASMOR 10M USB RGB LED Strip Light system includes the following components:
- 10-meter RGB LED Strip Light
- 44-key IR Remote Control
- In-line Control Box with USB power cable
- Хэрэглэгчийн гарын авлага
- Cleaning Wipes (may be included)
- Adhesive clips/mounts (may be included)
Тохиргоо ба суурилуулалт
- Гадаргууг бэлтгэх: Choose a clean, dry, and smooth surface for installation. Wipe the surface with the provided cleaning wipes (if applicable) and allow it to dry completely.
- LED туузыг тайлах: Fully unroll the LED strip before connecting it to power to prevent overheating.
- Бүрэлдэхүүн хэсгүүдийг холбох:
- Connect the LED strip to the in-line control box. Ensure the arrows on the connectors align.
- Connect the USB plug from the in-line control box to a 5V USB power source (e.g., USB wall adapter, power bank, computer USB port).
Figure 3: Connection Diagram. This diagram illustrates the correct way to connect the LED strip to its controller and power source. - Туузыг наах: Peel off the self-adhesive backing from the LED strip gradually as you press it firmly onto the prepared surface.
Figure 4: Installation Features. This image demonstrates the strong 3M adhesive, the ability to cut the strip at marked intervals, and its flexibility for bending around corners. - Cutting the Strip (Optional): If the strip is too long, you can cut it at the designated cutting marks (indicated by copper pads and a scissor icon) every 4 poles. Ensure power is disconnected before cutting.
Ашиглалтын заавар
Your TASMOR LED Strip Light offers three convenient control methods:
1. In-line Control Box
The small button on the in-line control box allows for basic control:
- Press once to turn ON/OFF.
- Press repeatedly to cycle through basic colors and dynamic modes.
2. 44-Key IR Remote Control
The remote control provides comprehensive access to various functions:
- Цахилгаан товч: Асаах/унтраах.
- Гэрэлтүүлгийн тохируулга: Гэрлийн эрчмийг нэмэгдүүлэх эсвэл бууруулах.
- Статик өнгө: 20 preset static colors.
- DIY Buttons: Customize and save your own colors.
- Динамик горимууд: 6 dynamic modes (e.g., Flash, Strobe, Fade, Smooth).
- Хөгжмийн горимууд: 4 music modes that react to sound.
3. MagicStrip APP (Bluetooth Control)
For advanced features and customization, download the "MagicStrip" app from the App Store or Google Play. Ensure Bluetooth is enabled on your smartphone.
- Өнгөт палитр: Access to 16 million colors for precise selection.
- Brightness & Saturation: Fine-tune light intensity and color vibrancy.
- DIY горимууд: Create and save custom lighting effects.
- Хөгжмийн синхрончлолын горим: The lights change color and speed in sync with music played through your phone's microphone. Adjust sensitivity and mode.
- Таймер функц: Schedule the lights to turn ON/OFF at specific times.
- Dynamic Scenes: Explore over 30 pre-programmed dynamic scenes and modes.
Засвар үйлчилгээ
- Цэвэрлэгээ: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Наалдац: If the strip begins to peel, reinforce it with additional adhesive clips or double-sided tape.
- Хадгалах: When not in use for extended periods, disconnect from power and store the strip in a cool, dry place.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Гэрэл асахгүй байна. | Тог байхгүй, холболт тасарсан, алсын зайны батарей дууслаа. | Check USB power source. Ensure all connections are secure. Replace remote battery (2 x A batteries required for remote, not included). |
| Алсын удирдлага ажиллахгүй байна. | Remote battery dead, IR sensor blocked, remote too far. | Replace remote battery. Ensure no obstructions between remote and IR receiver on the control box. Operate within 5-8 meters of the receiver. |
| APP cannot connect to the strip. | Bluetooth not enabled, app not paired, interference. | Ensure Bluetooth is enabled on your phone. Restart the app and the LED strip (unplug/replug USB). Try pairing again. |
| Гэрэл бүдэгхэн эсвэл анивчдаг. | Insufficient power, damaged strip. | Ensure USB power source provides sufficient current (e.g., 5V/2A). If a section is damaged, it may need replacement. |
| Өнгө буруу байна. | Incorrect connection, app/remote setting. | Check that the arrows on the connectors are aligned. Reset the strip by unplugging and replugging. Try different color settings on the remote or app. |
Үзүүлэлтүүд
| Брэнд | Тасмор |
| Үйлдвэрлэгч | Тасмор |
| Загварын дугаар | JYX-5050x18N |
| Бүтээгдэхүүний хэмжээ (L x W x H) | 1000 x 10 x 0.1 cm (10 meters) |
| Зүйлийн жин | 240 грамм |
| Өнгө | USB-10m (RGB) |
| Материал | Хуванцар |
| Булцууны тоо | 180 |
| Оруулсан бүрэлдэхүүн хэсгүүд | 10m RGB LED Strip Light, 44-key Remote Control, 1-button Control Box and App for control |
| Ботьtage | 5 вольт |
| Тодорхой хэрэглээ | Зөвхөн дотор ашиглах |
| Онцлог шинж чанарууд | Non-waterproof, No adapter included (USB powered) |
| Залгуурын төрөл | Electrical Cable (USB) |
| Батерей(ууд) багтсан | Үгүй |
| Зай(ууд) шаардлагатай | Yes (2 x A for remote control) |
| Булцууны төрөл | LED |
| Гэрлийн урсгал | 150 лм |
| Хүч | 60 ватт |
| IP үнэлгээ | IP20 |
Баталгаат болон дэмжлэг
For warranty information and technical support, please refer to the seller's policy on the purchase platform or contact the manufacturer directly. Please retain your proof of purchase for any warranty claims.
Manufacturer: Tasmor
