LENSGO 318C Утасгүй Лавальер Микрофон Хэрэглэгчийн Гарын Авлага

Танилцуулга

This manual provides detailed instructions for the setup, operation, and maintenance of your LENSGO 318C Wireless Lavalier Microphone system. The LENSGO 318C is a compact UHF wireless microphone system designed for clear audio recording with various devices, including cameras, smartphones, and camcorders.

Please read this manual thoroughly before using the product to ensure proper function and to maximize its performance.

Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай.

• Transmitter (TX) Unit
• Receiver (RX) Unit
• Соронзон клип
• Windproof Frabbit Fur (Windscreen)
• Соронзон тэврэлт
• Microphone Collar Clip
• Camera Cable (TRS)
• External Lavalier Microphone
• USB цэнэглэгч кабель (микро USB)
• Smartphone Cable (TRRS)
• Card Pin (for reset)
• Хадгалах уут
• Зааварчилгааны гарын авлага
• Баталгаат карт

Image: All components included in the LENSGO 318C Wireless Lavalier Microphone system package.

Бүтээгдэхүүн дууссанview

The LENSGO 318C system consists of a transmitter (TX) and a receiver (RX) unit, both featuring a compact design and magnetic attachment for versatile placement.

Гол онцлогууд:

• UHF утасгүй дамжуулалт: Utilizes UHF technology for stable signal transmission over distances up to 30 meters (98.4 ft) in open areas.
• 20 Сонгож болох суваг: Offers multiple channels to avoid interference and ensure clear audio.
• Magnetic Module Combination: Allows for convenient disassembly and assembly, enabling flexible mounting options.
• Built-in and External Microphone Options: Features a built-in microphone, with an option to connect an external lavalier microphone for enhanced audio capture.
• Цэнэглэдэг батерей: Each unit includes a 500 mAh rechargeable battery, providing approximately 4 hours of operation on a full charge.
• Өргөн нийцтэй байдал: Compatible with DSLR cameras, camcorders, iPhones, Android smartphones, iPads, and computers (may require additional adapters).

Image: Detailed product analysis highlighting the various parts and functions of the LENSGO 318C transmitter and receiver units.

Image: The LENSGO 318C units demonstrating the magnetic module combination for easy attachment.

Тохируулах гарын авлага

1. Төхөөрөмжийг цэнэглэх:

Before first use, fully charge both the transmitter (TX) and receiver (RX) units using the provided Micro USB charging cable. The charging port is located on the side of each unit. A full charge typically takes approximately 1.5 hours and provides up to 4 hours of operation.

Image: The Micro USB charging port and the single button for powering on the device.

2. Асаах болон холбох:

1. Press and hold the power button on both the TX and RX units for a few seconds to turn them on.
2. The units will automatically attempt to pair. Once successfully paired, the signal indicator light on the receiver will change from blue to cyan.
3. If pairing fails, ensure both units are charged and within range, then try again.

3. Таны төхөөрөмжид холбогдох:

• Ухаалаг утас/таблетын хувьд: Use the provided TRRS (3-ring) smartphone cable. Connect one end to the receiver's audio output interface and the other end to your smartphone's 3.5mm audio jack. (Note: Newer iPhones may require a Lightning to 3.5mm adapter, and some Android phones may require a USB-C to 3.5mm adapter, not included).
• For Cameras/Camcorders: Use the provided TRS (2-ring) camera cable. Connect one end to the receiver's audio output interface and the other end to your camera's microphone input jack.

Image: Visual representation of the wide compatibility of the LENSGO 318C with different recording devices.

4. Attaching the Microphone:

The transmitter unit can be attached to clothing using the magnetic clip or the microphone collar clip. For optimal audio quality, position the microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth. If using the external lavalier microphone, plug it into the external microphone port on the transmitter. The built-in microphone will automatically deactivate when an external microphone is connected.

Image: The LENSGO 318C transmitter clipped to a person's shirt, with the external lavalier microphone attached.

Ашиглалтын заавар

Сувгийн сонголт:

The LENSGO 318C features 20 UHF selectable channels. If you experience interference, you can change the operating frequency. To do this, simply press the power/frequency selection button on the transmitter unit. The receiver will automatically match the new frequency. It is recommended to select a channel with the least interference for optimal audio quality.

Аудио хяналт:

Some recording devices allow for real-time audio monitoring through their headphone jack. If your device supports this, connect headphones to monitor the audio being captured by the microphone. This helps ensure proper levels and sound quality during recording.

Бичлэг:

Once the microphone system is set up and connected to your recording device, begin recording as you normally would with your camera, smartphone, or camcorder. Ensure the microphone input is selected on your device if applicable.

Зураг: Жишээ ньamples of the LENSGO 318C in use for different recording applications.

Засвар үйлчилгээ

• Цэвэрлэгээ: Use a soft, dry cloth to clean the microphone units. Avoid using liquids or abrasive cleaners.
• Хадгалах: Store the microphone system in the provided storage bag in a cool, dry place when not in use.
• Батерейны арчилгаа: Батерейны ашиглалтын хугацааг уртасгахын тулд төхөөрөмжүүдийг байнга бүрэн цэнэггүй болгохоос зайлсхий. Байнга ашиглаагүй байсан ч тогтмол цэнэглэж байгаарай.
• Салхины шил: Use the windproof fur (windscreen) when recording outdoors to minimize wind noise.

Алдааг олж засварлах

• Дуу байхгүй/Бага хэмжээ:
  • Ensure both TX and RX units are powered on and successfully paired (receiver light is cyan).
  • Check that cables are securely connected to both the receiver and your recording device.
  • Verify that the correct cable (TRS for camera, TRRS for smartphone) is being used.
  • Adjust the microphone input level on your recording device.
  • Ensure the external lavalier microphone is fully plugged into the transmitter if used.
• Интерференц/Аудио чанар муу:
  • Change the operating channel by pressing the power/frequency selection button on the transmitter.
  • Ensure the transmitter and receiver are within the optimal operating range (within 20 meters / 65.6 ft for best results).
  • Avoid obstacles between the transmitter and receiver that might block the signal.
  • Minimize proximity to other wireless devices that might cause interference.
• Units Not Powering On/Charging:
  • Ensure the USB charging cable is properly connected to a power source and the units.
  • Өөр USB цэнэглэгч кабель эсвэл цахилгаан адаптер ашиглаж үзнэ үү.
  • If a unit is unresponsive, use the provided card pin to press the reset button (Insurance key) on the unit.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

LENSGO provides comprehensive after-sales support for the 318C Wireless Lavalier Microphone system.

• Хариу өгөх хугацаа: Customer inquiries are typically responded to within 24 hours.
• Буцаах бодлого: 60-day worry-free return period.
• Солих: Replacement available within 12 months of purchase.
• Техникийн дэмжлэг: Lifetime after-sales consultation and technical support are provided.

For any questions or assistance, please contact LENSGO customer service.

Image: LENSGO customer service commitment details.