Aigostar Wireless Doorbell Self-Powered (Model B08TGP227L) Instruction Manual

1. Бүтээгдэхүүн дууссанview

The Aigostar Wireless Doorbell system provides a convenient and reliable solution for home entry alerts. It features a self-powered transmitter and a battery-operated receiver, offering a long operating range and multiple customization options.

Зураг 1: Дууслааview of the Aigostar Wireless Doorbell system, showing the transmitter and receiver units.

Гол онцлогууд:

• Өөрөө ажилладаг дамжуулагч: No batteries required for the push button, ensuring a long lifespan.
• Усны хамгаалалттай дизайн: IP44 rated for dust and water resistance, suitable for outdoor use in various weather conditions (-4°F to 140°F).
• Өргөтгөсөн үйл ажиллагааны хүрээ: Up to 1000ft (300m) in open areas, or 328ft (100m) indoors, allowing coverage throughout your property.
• Тохируулах боломжтой хонх: 32 selectable melodies, including traditional 'Ding Dong'.
• Тохируулах дууны хэмжээ: 4 volume levels with a maximum of 110 dB.
• LED Flash Alert: Visual indication on the receiver for enhanced notification.
• Санах ойн функц: Цахилгаан тасарсны дараа сонгосон хонх болон дууны түвшний тохиргоог хадгална.

2. Багцын агуулга

Суулгахын өмнө багцад бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

• Self-Powered Transmitter(s)
• Battery-Operated Receiver(s)
• Суурилуулах эрэг ба зангуу
• Хоёр талт наалдамхай тууз
• Хэрэглэгчийн гарын авлага

Image 2: Contents of the Aigostar Wireless Doorbell package, including transmitters, receivers, and mounting hardware.

3. Тохиргоо ба суурилуулалт

The Aigostar Wireless Doorbell system is designed for easy installation. The transmitter and receiver units are pre-paired at the factory.

3.1 Хүлээн авагчийн тохиргоо

1. Insert 3 AAA batteries (not included) into the battery compartment of the receiver.
2. Place the receiver in a central location within your home, ensuring it is within the operating range of the transmitter.

3.2 Дамжуулагч суурилуулах

The transmitter can be installed using either adhesive tape or screws.

Method A: Adhesive Tape

1. Хүссэн бэхэлгээний гадаргууг хуурай, тоос шороо, тосгүй эсэхийг шалгахын тулд сайтар цэвэрлэнэ үү.
2. Peel off one side of the double-sided adhesive tape and apply it to the back of the transmitter.
3. Peel off the other side of the tape and firmly press the transmitter onto the cleaned surface. Hold for 30 seconds to ensure good adhesion.

Image 3: Step-by-step guide for mounting the transmitter using double-sided adhesive tape.

Method B: Screws

1. Халив ашиглан дамжуулагчийн арын тагийг зөөлөн онгойлгоно.
2. Ханан дээр хүссэн бэхэлгээний байршлыг тэмдэглэ.
3. Drill two holes at the marked positions. Insert the expansion bolts into the holes.
4. Align the back cover with the drilled holes and secure it with screws.
5. Attach the main body of the transmitter onto the secured back cover.

Image 4: Detailed instructions for mounting the transmitter using screws and anchors.

Image 5: A visual comparison of the two installation methods: adhesive tape and screws.

4. Ашиглалтын заавар

4.1 Аяыг солих нь

To change the melody, press the 'Music' button on the side of the receiver. Each press will cycle through the 32 available chimes. Stop pressing when you hear your desired melody.

Image 6: The receiver unit, highlighting the buttons for melody selection and volume adjustment.

4.2 Дууны хэмжээг тохируулах

To adjust the volume, press the 'Volume' button on the side of the receiver. There are 4 volume levels, ranging from 0 dB (mute) to 110 dB. Cycle through the levels until you reach your preferred volume.

Image 7: Visual representation of the 4 adjustable volume levels on the receiver.

4.3 LED Flash Alert

The receiver features an LED light that flashes when the doorbell is pressed, providing a visual alert in addition to the audio chime. This is particularly useful in noisy environments or for individuals with hearing impairments.

5. Засвар үйлчилгээ, арчилгаа

• Цэвэрлэгээ: Хаалганы хонхны хэсгүүдийг зөөлөн, хуурай даавуугаар арчина. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй.
• Батерей солих (Хүлээн авагч): When the receiver's sound becomes weak or inconsistent, replace the 3 AAA batteries.
• Дамжуулагч: The transmitter is self-powered and does not require battery replacement.
• Усны хамгаалалттай үнэлгээ: The transmitter is IP44 waterproof. While designed for outdoor use, avoid submerging it in water.

Image 8: The IP44 waterproof transmitter shown enduring snow and sun, indicating its suitability for diverse weather conditions.

6. Алдаа засах

If you encounter issues with your Aigostar Wireless Doorbell, refer to the following common solutions:

• No Sound from Receiver:
  • Check if the receiver batteries are correctly inserted and not depleted.
  • Ensure the volume is not set to 0 dB (mute).
  • Verify the transmitter and receiver are within operating range and not obstructed by thick walls or metal objects.
• Хаалганы хонх дуугарахгүй байна:
  • Confirm the transmitter button is being pressed firmly.
  • Дамжуулагчид ямар нэгэн физик гэмтэл байгаа эсэхийг шалгана уу.
  • If the units were moved, they might need to be re-paired (refer to manufacturer's website for specific re-pairing instructions if needed, as this model is typically pre-paired).
• Богино хугацааны үйл ажиллагааны хүрээ:
  • Хүлээн авагчийг илүү төвд байрлуул.
  • Avoid placing units near large metal structures, heavy concrete walls, or other electronic devices that may cause interference.

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

Aigostar products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact details provided with your purchase or visit the official Aigostar webсайт.

You can visit the Aigostar Store for more information: Амазон дээрх Aigostar дэлгүүр