Geek Smart L-B201

Geek Smart Fingerprint Door Lock User Manual

Model: L-B201 | Brand: Geek Smart

1. Танилцуулга

The Geek Smart Fingerprint Door Lock provides a convenient and secure keyless entry solution for your home, apartment, office, or hotel. With advanced biometric technology, you can unlock your door with a simple touch of your finger, offering quick and reliable access.

Гол онцлогууд нь:

  • Хурууны хээ тайлах: Lock and unlock your door in a single motion by scanning your fingerprints as you grip the door handle. A lightning-speed 0.1 seconds is all that is required to open, much faster than any traditional key.
  • Хялбар суурилуулалт: No wires required. Fits standard-sized doors of 1-3/8'' to 2-1/8'' (35 to 55mm) door thickness, with an adjustable latch of 2-3/8'' (60mm) or 2-3/4'' (70mm). Suitable for both left and right-handed doors.
  • Хэрэглэгчийн удирдлага: Voice prompts guide you to set up to 20 fingerprints, including 2 admin-user fingerprints. Note: When 2 admin-user fingerprints have been collected, adding new ones will prompt normal-user fingerprint collection.
  • Яаралтай тусламж: The fingerprint door knob requires 4 AAA batteries, which can last for 12 months based on testing. There is a Micro USB emergency charge port for emergency unlock when the lock is out of battery, ensuring you are never locked out.

2. Хайрцагт юу байна

Your Geek Smart Fingerprint Door Lock package includes all necessary components for installation and operation:

  • Front Handle (with fingerprint sensor)
  • Rear Handle (interior side)
  • Adjustable Latch (60mm or 70mm)
  • Ажил хаялтын хавтан
  • Суурилуулах эрэг (янз бүрийн хэмжээтэй)
  • Rubber Gaskets (for door protection)
  • Mechanical Keys (2 for emergency access)
  • Micro USB Charging Cable (for emergency power)
  • Reset Pin (for fingerprint setup)
  • Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
Backup Mechanical Keys

Image: Backup Mechanical Keys. The lock comes with two physical keys for manual override in case of battery depletion or other issues.

3. Тохиргоо & Суурилуулалт

Follow these steps to install your Geek Smart Fingerprint Door Lock:

  1. Хаалгыг бэлтгэх: Ensure your door thickness is between 1-3/8'' to 2-1/8'' (35 to 55mm). The adjustable latch can be set to 2-3/8'' (60mm) or 2-3/4'' (70mm) to fit your door's backset.
  2. Түгжээг суулгах: Insert the latch mechanism into the door edge. Secure it with the provided wood screws.
  3. Холбох бариул: Feed the ribbon cable from the exterior handle through the latch mechanism and connect it to the interior handle. Ensure the connecting screws on the exterior handle align with the latch.
  4. Аюулгүй бариул: Fit the interior handle onto the exterior handle, ensuring the connecting screws pass through the latch. Secure the handles using the provided screws.
  5. Батерейг суулгах: Unscrew the battery cover on the interior handle and insert 4 AAA batteries. Replace the cover.
Суурилуулалтын диаграм

Image: Installation Diagram. The lock is designed for easy DIY installation with just two screws.

Video: Official Installation Guide for Geek Smart L-B201. This video provides a detailed walkthrough of the installation process.

4. Ашиглалтын заавар

Fingerprint Setup (Admin & Normal Users)

To set up fingerprints:

  1. Locate the small reset pinhole on the interior handle.
  2. Insert the provided reset pin into the hole and press until you hear a voice prompt.
  3. Follow the voice prompts to place your finger on the sensor multiple times until the fingerprint is successfully registered.
  4. The first two fingerprints registered will be designated as admin users. Subsequent fingerprints will be normal users.

Video: Geek Smart Fingerprint Door Lock L-B201 Operation. This video demonstrates how to set up and use fingerprints.

Дамжуулах горим

The lock features a passage mode, allowing the door to remain unlocked for free entry and exit. This is useful for high-traffic areas or when you don't require constant locking.

  • To activate/deactivate passage mode, locate the mode switching button on the interior handle.
  • Press the button to toggle between auto-lock and passage mode.
Passage Mode Feature

Image: Passage Mode. Allows the door to remain unlocked for free entry and exit.

Яаралтай түгжээг тайлах

In case the batteries run out, you can still access your door:

  • Механик түлхүүр: Use one of the provided mechanical keys to manually unlock the door. The keyhole is located at the bottom of the exterior handle.
  • Micro USB Emergency Power: Connect a power bank to the Micro USB port located on the exterior handle to temporarily power the lock and use your fingerprint.

5. Засвар үйлчилгээ

To ensure optimal performance and longevity of your Geek Smart Fingerprint Door Lock:

  • Зай солих: Replace the 4 AAA batteries approximately every 12 months, or when the low battery indicator appears.
  • Цэвэрлэгээ: Wipe the fingerprint sensor and handle surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Хурууны хээ мэдрэгчийн арчилгаа: Ensure your fingers are clean and dry when using the fingerprint sensor for best results.

6. Алдаа засах

Энд зарим нийтлэг асуудал, тэдгээрийн шийдлүүд байна:

АсуудалБоломжит шалтгаанШийдэл
Хурууны хээ танигдаагүйWet or dirty finger, sensor dirty, fingerprint not properly registered.Ensure finger and sensor are clean and dry. Re-register fingerprint if issue persists. Try different angles.
Түгжээ хариу өгөхгүй байнаLow battery, incorrect installation.Replace batteries. Use emergency Micro USB power. Check installation steps.
Door does not auto-lockPassage mode is active.Deactivate passage mode using the mode switching button.
Lock fails after 1 yearProduct defect (rare), battery issues.Contact customer service for support. Ensure regular battery replacement.

Video: Fingerprint reader TAKES SEVERAL TRIES TO WORK. This video illustrates a common issue with fingerprint recognition.

7. Техникийн үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
Загварын дугаарЛ-В201
МатериалМеталл
ӨнгөӨнгөлсөн хар
Хаалганы зузаан1-3/8'' to 2-1/8'' (35 to 55mm)
Тохируулах түгжээ2-3/8'' (60мм) эсвэл 2-3/4'' (70мм)
Хурууны хээ багтаамжUp to 20 (2 admin, 18 normal)
Хурдны түгжээг тайлах0.1 секунд
Эрчим хүчний эх үүсвэр4 AAA батерей (оруулаагүй)
Зайны ашиглалтОйролцоогоор 12 сар
Онцгой байдлын эрчим хүчМикро USB порт
Зүйлийн жин16 унц (1 фунт)
Бүтээгдэхүүний хэмжээс6.03 x 2.56 x 2.82 инч

8. Баталгаат хугацаа ба дэмжлэг

Geek Smart Team provides dedicated customer service for our smart door lock. For any problems with installation or technical issues when using the product, please feel free to contact us.

Refer to the warranty card included in your package for specific warranty terms and contact information.

You can also find additional support and installation videos on the Geek Smart YouTube channel by scanning the QR code provided in your user manual.

Холбогдох баримт бичиг - Л-В201

Урьдчилсанview Geek Smart L-B201 Smart Lock хэрэглэгчийн гарын авлага
Geek Smart L-B201 ухаалаг түгжээний хэрэглэгчийн гарын авлага нь суурилуулалт, ашиглалт, техникийн үзүүлэлтүүд болон алдааг олж засварлахыг багтаасан болно. Хэрхэн суулгах, хурууны хээ нэмэх, нэвтрэх горимыг ашиглах талаар суралц.
Урьдчилсанview GeekSmart L-B201 ухаалаг түгжээний хэрэглэгчийн гарын авлага
GeekSmart L-B201 ухаалаг цоожны суурилуулалт, ажиллагаа, техникийн үзүүлэлтүүд болон алдааг олж засварлах талаар дэлгэрэнгүй хэрэглэгчийн гарын авлага. Хурууны хээ нэмэх, горимуудыг удирдах, ухаалаг цоожоо хэрхэн арчлах талаар суралцаарай.
Урьдчилсанview GeekSmart L-B202 ухаалаг хурууны хээтэй хаалганы түгжээний хэрэглэгчийн гарын авлага
GeekSmart L-B202 ухаалаг хурууны хээтэй хаалганы түгжээний хэрэглэгчийн гарын авлагад суурилуулалт, ажиллагаа, аппликейшн ашиглалт, техникийн үзүүлэлтүүд болон алдааг олж засварлах талаар дэлгэрэнгүй зааварчилгаа өгсөн болно.
Урьдчилсанview Geek Smart L-F501 хэрэглэгчийн гарын авлага
Geek Smart L-F501 ухаалаг цоожны хэрэглэгчийн гарын авлага, онцлог, ашиглалтын заавар, алдааг олж засварлах, техникийн үзүүлэлтүүдийг багтаасан. Програм эсвэл товчлуураар дамжуулан хэрэглэгчдийг хэрхэн суулгах, тохируулах, удирдах талаар суралц.
Урьдчилсанview GeekSmart K01 Хурууны хээ түгжих хэрэглэгчийн гарын авлага
GeekSmart K01 хурууны хээтэй ухаалаг түгжээг тохируулах, ашиглах гарын авлага нь програмыг нэгтгэх, хэрэглэгчийн удирдлага, түгжээг тайлах функцуудыг багтаасан болно.
Урьдчилсанview GeekSmart L-B400 ухаалаг түгжээний хэрэглэгчийн гарын авлага
GeekSmart L-B400 Smart Lock-ийн суурилуулалт, аппликейшны ажиллагаа, функцууд, алдааг олж засварлах болон техникийн үзүүлэлтүүдийг хамарсан цогц хэрэглэгчийн гарын авлага. Хурууны хээ, нууц үг, цахим түлхүүрүүдийг хэрхэн тохируулах, хандалтыг хэрхэн удирдах талаар суралцаарай.