Einhell Cordless Nailer TE-CN 18 Li-Solo Power X-Change Instruction Manual

1. Танилцуулга

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CN 18 Li-Solo Cordless Nailer/Stapler. This tool is designed for fastening objects using staples or nails in various DIY, workshop, and renovation tasks. As part of the Power X-Change family, it is compatible with all Power X-Change series batteries (sold separately).

Зураг 1.1: The Einhell TE-CN 18 Li-Solo Cordless Nailer/Stapler. This image shows the main unit with a battery attached, ready for use, alongside a small quantity of nails and staples.

2. Аюулгүй ажиллагааны заавар

АНХААРУУЛГА: Энэхүү цахилгаан хэрэгсэлд өгөгдсөн бүх аюулгүй байдлын анхааруулга, заавар, зураг чимэглэл, техникийн үзүүлэлтүүдийг уншина уу. Доор жагсаасан бүх зааврыг дагаж мөрдөхгүй байх нь цахилгаан цочрол, гал болон/эсвэл хүнд гэмтэл учруулж болзошгүй.

• Багажийг ажиллуулахдаа нүдний хамгаалалт болон сонсголын хамгаалалтыг үргэлж зүүж байгаарай.
• Do not point the tool at yourself or others.
• Ensure the workpiece is securely fastened before operation.
• Аливаа тохируулга хийх, дагалдах хэрэгслийг солих, багажийг хадгалахын өмнө батерейг салга.
• Keep hands and body parts away from the firing area.
• Do not operate the tool if the safety nose is damaged or malfunctioning.
• Use only recommended nails and staples for this tool.
• Ажлын талбайг цэвэр, гэрэлтүүлэгтэй байлгах. Эмх замбараагүй эсвэл харанхуй газар осол аваар гарахыг өдөөдөг.
• Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд цахилгаан хэрэгслийг бүү ажиллуул.
• Цахилгаан хэрэгслийг хадгалах. Хөдөлгөөнт эд ангиудыг буруу байрлуулах, холбох, эд анги тасрах, цахилгаан хэрэгслийн ажиллагаанд нөлөөлж болзошгүй бусад нөхцөл байдлыг шалгана уу.

Зураг 2.1: Safety Nose Indicator. This icon highlights the importance of the safety nose mechanism, which prevents accidental firing.

3. Бүтээгдэхүүний онцлог

The Einhell TE-CN 18 Li-Solo offers a range of features designed for efficient and safe fastening:

• Power X-Change Compatibility: Utilizes any 18V battery from the Einhell Power X-Change system.
• 2-ын-1 функциональ байдал: Capable of both nailing and stapling for versatile applications.
• Өндөр нөлөөллийн хувь: Robust gearbox delivers up to 20 impacts per minute.
• Тохируулж болох гүн: A large adjustment wheel allows for variable impact depth, suitable for different material thicknesses.
• Slim Stapling Nose: Enables precise work close to edges and in confined spaces.
• Easy-Open Magazine: The magazine can be opened and refilled quickly with a push of a button.
• Magazine Level Indicator: Provides a clear overview of the current fill level.
• Safety Release Mechanism: Prevents unintentional firing and reduces the risk of injury.
• Softgrip Surfaces: Эргономикийн хувьд тав тухтай, найдвартай харьцах зориулалттай.
• Practical Belt Clip: For convenient and safe storage during work.
• Багцад багтсан бэхэлгээнүүд: Supplied with 300 nails (32 mm) and 300 staples (19 mm).
• Аллен Түлхүүр: Included for quick and easy clearing of jams.

Зураг 3.1: Power X-Change System Compatibility. This image illustrates the nailer's compatibility with the Einhell Power X-Change battery system, showing various tools that share the same battery platform.

Зураг 3.2: Dual Functionality. This image highlights the tool's ability to use both staples and nails, demonstrating the versatility of the magazine.

4. Тохиргоо

4.1. Зай суурилуулах

The Einhell TE-CN 18 Li-Solo is supplied without a battery or charger. These must be purchased separately as part of the Power X-Change system.

1. Хэрэгсэл унтарсан эсэхийг шалгаарай.
2. Align the charged Power X-Change battery pack with the battery slot on the tool.
3. Батерейг байрандаа найдвартай орох хүртэл нь үүрэнд нь гулсуулна уу.
4. Суллуулахын тулд зайны багц дээрх суллах товчийг дараад гадагш гаргана уу.

Зураг 4.1: Battery and Charger Exclusion. This image visually indicates that the battery and charger are not included with the tool and must be acquired separately.

4.2. Loading Nails or Staples

Always disconnect the battery before loading fasteners.

1. Press the magazine release button (refer to Figure 4.2) to open the magazine.
2. Insert a strip of nails or staples into the magazine with the points facing forward. Ensure the correct size (32mm nails or 19mm staples) is used.
3. Close the magazine until it clicks securely.
4. Check the magazine level indicator to confirm fasteners are loaded.

Зураг 4.2: Magazine Release. This image shows a hand pressing the button to open the fastener magazine for loading.

Зураг 4.3: Fastener Sizes. This image displays the two types of fasteners included: 32mm nails and 19mm staples.

4.3. Гүн тохируулах

The impact depth can be adjusted to suit the material and desired finish.

1. Locate the depth adjustment wheel on the top of the tool.
2. Rotate the wheel to increase or decrease the impact depth. Test on a scrap piece of material to find the optimal setting.

Зураг 4.4: Depth Adjustment. This image shows hands adjusting the dial on top of the tool to control the fastener's driving depth.

Зураг 4.5: Depth Adjustment Icon. This icon visually represents the depth adjustment feature of the tool.

5. Ашиглалтын заавар

Ашиглахын өмнө бүх аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг ойлгож, дагаж мөрдсөн эсэхийг шалгаарай.

1. Ажлын хэсгийг бэлтгэх: Ensure the material to be fastened is clean, dry, and free of obstructions.
2. Байршлын хэрэгсэл: Place the nose of the tool firmly against the workpiece at the desired fastening point. The safety nose must be fully depressed for the tool to fire.
3. Fire Fastener: Squeeze the trigger to drive a nail or staple. The tool will fire only when the safety nose is engaged.
4. Working Near Edges: The slim stapling nose allows for precise fastening close to edges.

Зураг 5.1: Operating the Tool. This image shows a user operating the cordless nailer to fasten a baseboard, demonstrating its use in a practical application.

Зураг 5.2: Slim Nose Design. This close-up image highlights the slim design of the tool's nose, which facilitates working accurately in tight spaces and close to edges.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your tool. Always disconnect the battery before performing any maintenance.

6.1. Цэвэрлэгээ

• Wipe the tool clean with a soft, damp даавуу. Хүчтэй химийн бодис, зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй.
• Хэт халалтаас сэргийлэхийн тулд агааржуулалтын нүхийг тоос, хог хаягдлаас хол байлга.
• Periodically inspect the magazine and firing mechanism for any buildup of dust or small debris.

6.2. Clearing Jams

If a nail or staple becomes jammed:

1. Disconnect the battery pack immediately.
2. Open the magazine and remove any remaining fasteners.
3. Use the provided Allen key to carefully remove the jammed fastener from the firing mechanism. Refer to the tool's diagram for specific jam clearing points.
4. Ensure all parts are clear before reloading and reattaching the battery.

6.3. Хадгалах

• Хэрэгслийг хуурай, аюулгүй газар, хүүхдэд хүрэхгүй газар хадгална.
• Удаан хугацаагаар хадгалахаасаа өмнө батерейны багцыг салгаж авна уу.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

8.1. Fastener Capacity per Battery Charge

Approximate number of fasteners that can be driven per battery charge (soft timber):

Staples (22 mm)

Зураг 8.1: Staple Capacity Chart. This chart illustrates the approximate number of 22mm staples that can be driven on a single charge for various Power X-Change battery capacities.

• 2.0 Ah: 1995 pcs.
• 2.5 Ah: 2642 pcs.
• 3.0 Ah: 3171 pcs.
• 4.0 Ah: 4228 pcs.
• 5.2 Ah: 5496 pcs.
• 6.0 Ah: 6342 pcs.
• 8.0 Ah: 8456 pcs.

Nails (32 mm)

Зураг 8.2: Nail Capacity Chart. This chart illustrates the approximate number of 32mm nails that can be driven on a single charge for various Power X-Change battery capacities.

• 2.0 Ah: 2030 pcs.
• 2.5 Ah: 2670 pcs.
• 3.0 Ah: 3204 pcs.
• 4.0 Ah: 4272 pcs.
• 5.2 Ah: 5554 pcs.
• 6.0 Ah: 6408 pcs.
• 8.0 Ah: 8544 pcs.

9. Баталгаат хугацаа ба дэмжлэг

Einhell provides a 2-year availability for spare parts for this product.

For warranty claims, technical support, or to order spare parts, please contact Einhell customer service or visit their official webсайт. Баталгаат баталгааг баталгаажуулахын тулд худалдан авалтаа баталгаажуулна уу.

Холбоо барих мэдээлэл: Please refer to the official Einhell website or product packaging for the most up-to-date contact details for your region.