Thank you for choosing the Scheppach SBP250 Submersible Pump. This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your pump. Designed for clean water transfer from rain barrels or cisterns, it features a powerful 250W motor, a capacity of 6500 liters per hour, and an automatic float switch for convenient use. Please read these instructions carefully before operating the device and keep them for future reference.
The Scheppach SBP250 submersible pump is designed for efficient water transfer. Familiarize yourself with its main components:
Зураг 1: Scheppach SBP250 Submersible Pump. This image shows the pump unit, including the integrated handle, power cable, float switch, and the discharge connection point.
Насосны их бие: Durable plastic housing protecting the motor and internal components.
Мотор: Powerful 250W motor for efficient water pumping.
Хөвөгч шилжүүлэгч: Automatically turns the pump on and off based on water level.
Цэнэглэх холболт: Standard 1¼" connection for hoses.
Цахилгааны утас: 10-meter cable for extended reach, designed to be plugged outside the wet area.
Бариул: Integrated handle for easy transport and lowering/raising the pump.
Тохиргоо
Follow these steps to set up your submersible pump:
Савлах: Carefully remove the pump from its packaging. Check for any signs of damage.
Хоолойн холболт: Attach a suitable discharge hose (not included) to the 1¼" discharge connection. Ensure a tight and secure fit to prevent leaks.
Насосыг байрлуулах нь:Зураг 2: Pump positioned in water with the float switch freely moving. The pump is ready for operation.Place the pump on a stable, level surface in the water source (e.g., rain barrel, cistern). Ensure the pump is fully submerged and not resting on mud or debris that could block the intake. The float switch must be able to move freely to ensure automatic operation.
Эрчим хүчний холболт: Ensure your hands are dry. Plug the 10-meter power cable into a grounded electrical outlet. The outlet should be located outside the wet area.
Ажиллаж байна
The SBP250 pump operates automatically via its float switch:
Автомат ажиллагаа: Once plugged in and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will stop when the water level drops and the float switch lowers.
Гараар дарж бичих (хэрэв байгаа бол): Some models allow the float switch to be fixed in an 'up' position for continuous operation. Refer to the specific instructions for your model if this feature is desired. For the SBP250, ensure the float switch can move freely for standard automatic operation.
Хяналт: Periodically check the pump's operation and the water level. Ensure the discharge hose is clear and directing water as intended.
Зураг 3: The SBP250 pump actively pumping water from a pond, demonstrating its intended use for water transfer.
Цэвэрлэгээ: After each use, especially if pumping slightly dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake screen.
Шалгалт: Regularly inspect the power cable and plug for any damage. Check the discharge connection for wear or leaks.
Өвлийн агуулах: If storing the pump in freezing temperatures, ensure all water is drained from the pump and hose to prevent damage from ice expansion. Store in a dry, frost-free location.
Хэрэглэгчийн засвар үйлчилгээ хийх боломжтой хэсэг байхгүй: The motor and internal components are not user-serviceable. Do not attempt to open the pump housing.
Цахилгааны холболт ба таслуурыг шалгана уу. Ensure water level is high enough to lift the float switch. Disconnect power, then check and clear any blockages in the intake area.
Wait for water level to rise or manually adjust float switch position (if applicable). Disconnect power, let the pump cool down, then check for blockages or dry running.
Үзүүлэлтүүд
Онцлог
Үнэ цэнэ
Брэнд
Шеппах
Загварын дугаар
SBP250 (Reference: 5909506901)
Хүч
250 Вт
Ботьtage
230 вольт
Макс. Урсгалын хурд
Цагт 6500 литр
Max. Discharge Height
7 метр
Холболтыг зайлуулах
1¼"
Кабелийн урт
10 метр
Материал
Хуванцар
Жин
4 кг
Хэмжээ (L x W x H)
1 x 1 x 1 см (Note: These dimensions appear to be generic; actual product dimensions may vary.)
Баталгаат болон дэмжлэг
Scheppach products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Scheppach website. Please have your model number (SBP250) and purchase details ready when contacting support.
