Sharkoon RGB SLIDER

Sharkoon RGB SLIDER WT Mid-Tower PC Case User Manual

Model: RGB SLIDER WT

Brand: Sharkoon

1. Танилцуулга

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view дотоод бүрэлдэхүүн хэсгүүдийн.

Sharkoon RGB SLIDER WT PC Case, front-side view

Зураг 1.1: Урд тал view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

  • Sharkoon RGB SLIDER WT PC Case
  • 1x 120mm Rear Fan (pre-installed)
  • Accessory Box (containing screws, cable ties, and this manual)

3. Техникийн үзүүлэлтүүд

ОнцлогДэлгэрэнгүй
Хэмжээ (L x W x H)40 x 19 x 45.6 см
Жин6 кг
Кейсийн төрөлМиди цамхаг
Хажуугийн хавтангийн материалЧанартай шил
Хөргөх аргаАгаар хөргөх
Урд I / O портууд2x USB 3.0, 1x USB 2.0, Аудио оролт/гаралт
Drive Bays2x 3.5" HDD, 5x 2.5" SSD (2 shared with 3.5")
GPU-ийн хамгийн их урт335mm (without front fans)
CPU хөргөгчийн хамгийн их өндөр157 мм
PSU-ийн хамгийн их урт175 мм
Урьдчилан суулгасан фенүүд1x 120mm Rear Fan
Сэнсний тулгуур (урд)3х120мм
Сэнсний тулгуур (Дээд талд)2х 120мм эсвэл 2х140мм
Сэнсний тулгуур (Арын)1х120мм
Sharkoon RGB SLIDER WT PC Case dimensions diagram

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Тохиргоо ба суурилуулалт

4.1. Бэлтгэл ажил

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Эх хавтанг суурилуулах

  1. Install the I/O shield into the designated slot at the rear of the case.
  2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
  3. Өгөгдсөн эрэг ашиглан эх хавтанг бэхлээрэй.
Интерьер view of Sharkoon RGB SLIDER WT PC Case with motherboard area

Зураг 4.1: Дотоод засал view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Цахилгаан хангамжийн нэгж (PSU) суурилуулах

  1. Locate the PSU tunnel at the bottom rear of the case.
  2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
  3. PSU-ийг хайрцагны арын боолтоор бэхлээрэй.

4.4. Хадгалах төхөөрөмж суурилуулах

The case supports 3.5" HDDs and 2.5" SSDs.

  • 3.5" HDD: Install into the drive cage located within the PSU tunnel.
  • 2.5" SSD: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.
Арын дотоод засал view of Sharkoon RGB SLIDER WT PC Case showing cable management and drive bays

Зураг 4.2: Арын доторлогоо view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

  1. Шаардлагатай PCIe үүрний тагийг хайрцагны ар талаас салга.
  2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
  3. Secure the card with screws.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

  • Урд фэнүүд: Remove the front panel to access the mounting points for up to three 120mm fans.
  • Шилдэг шүтэн бишрэгчид: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Кабелийн менежмент

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Ашиглалтын заавар

5.1. Асаах

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Топ view of Sharkoon RGB SLIDER WT PC Case showing front I/O ports

Зураг 5.1: Дээд талд view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. RGB гэрэлтүүлгийн удирдлага

The front RGB LED strip can be controlled in two ways:

  • Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
  • Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Урд талын самбарын портууд

The front I/O panel provides convenient access to:

  • 2x USB 3.0 ports for high-speed data transfer.
  • 1x USB 2.0 port for general peripherals.
  • Audio In (microphone) and Audio Out (headphone) jacks.

6. Засвар үйлчилгээ

6.1. Цэвэрлэгээ

  • Гадна: Гадна талын гадаргууг зөөлөн арчиж, damp даавуу. Зүлгүүрийн цэвэрлэгчээс зайлсхий.
  • Тоосны шүүлтүүр: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
  • Дотоод засал: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. Агаарын урсгал

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. Алдаа засах

7.1. Систем асахгүй байна

  • Verify that the power cable is securely connected to both the PSU and the wall outlet.
  • Ensure the PSU's power switch is in the 'ON' position.
  • Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
  • Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Fans Not Spinning

  • Эх хавтан эсвэл сэнсний хянагчтай сэнсний тэжээлийн холболтыг шалгана уу.
  • Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. RGB гэрэлтүүлэг ажиллахгүй байна

  • If using the built-in controller, press the RGB button to cycle modes.
  • If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
  • Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Урд талын самбарын USB/Аудио портууд ажиллахгүй байна

  • Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
  • Ensure motherboard drivers are installed.

8. Баталгаат хугацаа ба дэмжлэг

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon webсайт: www.sharkoon.com

Холбогдох баримт бичиг - RGB SLIDER

Урьдчилсанview Sharkoon RGB WAVE ATX PC Case - Техникийн үзүүлэлтүүд болон суулгах гарын авлага
Хаягтай RGB гэрэлтүүлэг бүхий Sharkoon RGB WAVE ATX компьютерийн гэрлийн нарийвчилсан үзүүлэлтүүд болон суулгах заавар. ampхөтчийн зай, багаж хэрэгсэлгүй суулгац.
Урьдчилсанview Sharkoon MK6 RGB Micro-ATX PC Case: Installation and Specifications
Comprehensive guide to the Sharkoon MK6 RGB Micro-ATX PC Case, covering technical specifications, safety instructions, and detailed installation steps for components, fans, and RGB lighting.
Урьдчилсанview Sharkoon MK4 RGB STRIP / MK4W RGB STRIP Micro-ATX PC Case гарын авлага
Comprehensive guide for Sharkoon MK4 RGB STRIP and MK4W RGB STRIP Micro-ATX PC cases, covering technical specifications, safety precautions, detailed installation steps for components like HDDs, SSDs, expansion cards, fans, and radiators, and RGB lighting control.
Урьдчилсанview Sharkoon MK3 & MK3 RGB Boîtier PC Micro-ATX: Техникийн үзүүлэлтүүд, Мануэль ба Суулгах гарын авлага
Дэлгэрэнгүй үзүүлэлтүүд, зааварчилгаа, суулгах заавар, компьютерийн Micro-ATX Sharkoon MK3 ба MK3 RGB-ийг суулгана. Découvrez les caractéristiques, la compatibilite болон le control RVB.
Урьдчилсанview Sharkoon MK6 RGB Micro-ATX компьютерын гэр - Үзүүлэлт ба угсралтын гарын авлага
Sharkoon MK6 RGB Micro-ATX PC Case-ийн дэлгэрэнгүй үзүүлэлт, аюулгүй байдлын удирдамж, угсралтын заавар. Үүний онцлог шинж чанарууд, нийцтэй байдал, суурилуулах үйл явцын талаар мэдэж аваарай.
Урьдчилсанview Sharkoon REBEL C60 ATX PC Case гарын авлага | Онцгой байдал e Montagem
Sharkoon REBEL C60 ATX-г бүрэн гүйцэд суулгана. Inclui especificações técnicas, instruções de montagЭдгээр хөтчүүд, вентоинха, радиаторууд, RGB болон хууль ёсны мэдээллийн хэрэгслүүд.